TopTes TS-501B Sound Level Meter and TS-710 Light Meter Instruction Manual

1. הקדמה

This manual provides essential information for the safe and effective operation of your TopTes TS-501B Sound Level Meter and TS-710 Light Meter. These devices are designed for accurate environmental monitoring, allowing users to measure noise levels and light intensity in various settings. Please read this manual thoroughly before use and retain it for future reference.

2. המוצר נגמרview

The TopTes TS-501B Sound Level Meter and TS-710 Light Meter are a combined solution for environmental assessment. The TS-501B measures sound levels, while the TS-710 measures light intensity, ambient temperature, and humidity. Both devices feature a 2.25-inch backlit LCD screen for clear readings and user-friendly functions.

2.1 TS-501B Sound Level Meter

The TS-501B is equipped with a 1/2 inch electric condenser microphone for precise sound measurement. It offers A/C weighting options to analyze sound based on human ear perception (A-weighting) or for general noise analysis (C-weighting). The measurement range is 30 to 130 dB.

איור 1: TS-501B Sound Level Meter showing A-Weighting measurement. This mode measures sound levels as perceived by the human ear, typically ranging from 30 to 130 dBA.

איור 2: TS-501B Sound Level Meter showing C-Weighting measurement. This mode is suitable for general noise analysis, with a range of 30 to 130 dBC.

איור 3: תקריב view of the TS-501B's 1/2 inch Electric Condenser Microphone, protected by a windshield ball for high precision measurements.

2.2 TS-710 Light Meter

The TS-710 features a 180° rotating sensor for flexible light measurement from various directions. It measures light intensity from 0.1 to 200,000 lux (or 0.1 to 20,000 FC) and also provides readings for ambient temperature and humidity.

איור 4: TS-710 Light Meter demonstrating its 180° rotating sensor, allowing detection of light from all directions.

איור 5: TS-710 Light Meter with its easy-to-read 2.25-inch backlit LCD screen, showing current light, temperature, and humidity readings.

איור 6: TS-710 Light Meter illustrating its capability for dual measurement units: LUX (0.1~200,000 LUX) and Foot-Candle (0.1~20,000 FC).

3. מידע בטיחות

Observe the following safety precautions to prevent injury and avoid damage to the devices:

• Do not attempt to open or modify the devices.
• Keep the devices away from water, high humidity, and extreme temperatures.
• הימנעו מהפלת המכשירים או מחשיפתם לפגיעות חזקות.
• Remove batteries if the devices will not be used for an extended period.
• השלך סוללות בהתאם לתקנות המקומיות.

4. תכולת החבילה

ודא שכל הפריטים נמצאים בחבילה:

• 1 x TopTes TS-710 Light Meter
• 1 x TopTes TS-501B Sound Level Meter
• 2 x Carrying Cases (one for each device)
• סוללות AAA (מותקנות מראש או כלולות בנפרד)
• מדריך למשתמש (מסמך זה)

5. התקנה

5.1 התקנת סוללה

1. Locate the battery compartment on the back of each device.
2. פתח את מכסה הסוללה.
3. הכניסו את סוללות ה-AAA, תוך הקפדה על קוטביות נכונה (+/-).
4. סגור היטב את מכסה הסוללה.

5.2 הפעלה/כיבוי

הקש על כּוֹחַ button (usually marked with a power symbol) on each device to turn it on. Press and hold the same button to turn it off. Both devices feature an automatic power-off function to conserve battery life after a period of inactivity.

6. הוראות הפעלה

6.1 General Functions (Both Devices)

• רישום מקסימלי/מינימלי: הקש על MAX/MIN button to display the maximum or minimum recorded value during a measurement session. Press again to cycle through MAX, MIN, and current readings.
• החזקת נתונים: הקש על לְהַחזִיק button (or similar icon) to freeze the current reading on the display. Press again to release.
• תאורה אחורית: הקש על תאורה אחורית button (often marked with a light bulb symbol) to activate or deactivate the screen backlight for improved visibility in low-light conditions.

איור 7: Explanation of MAX and MIN functions. MAX displays the highest value measured, while MIN displays the lowest value measured over a given period.

6.2 TS-501B Sound Level Meter Operation

1. הפעל את המכשיר.
2. Select Weighting (A/C): הקש על מיזוג אוויר button to switch between A-weighting (for human ear perception) and C-weighting (for general noise analysis).
3. Select Response Time (FAST/SLOW): הקש על F/S button to choose between Fast (125ms) or Slow (1s) response times, depending on the nature of the sound being measured.
4. Point the microphone towards the sound source. The current sound level in decibels (dB) will be displayed.

6.3 TS-710 Light Meter Operation

1. הפעל את המכשיר.
2. Rotate Sensor: Adjust the 180° rotating sensor to face the light source directly or to capture ambient light as needed.
3. Select Unit (LUX/FC): הקש על יְחִידָה button to switch between Lux and Foot-Candle measurement units.
4. The device will display the light intensity, ambient temperature, and humidity.

7. תחזוקה

• ניקוי: Use a soft, dry cloth to clean the device surfaces. Do not use abrasive cleaners or solvents. For the TS-710's light sensor, ensure it remains clean and free of dust for accurate readings.
• אִחסוּן: Store the devices in their protective carrying cases in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
• החלפת סוללה: Replace batteries promptly when the low battery indicator appears on the display to ensure continuous accurate operation.

8. פתרון תקלות

9. מפרטים

9.1 TS-501B Sound Level Meter

• טווח מדידה: 30 עד 130 dB
• שִׁקלוּל: מיזוג אוויר
• מִיקרוֹפוֹן: 1/2 inch Electric Condenser Microphone
• לְהַצִיג: מסך LCD בגודל 2.25 אינץ' עם תאורה אחורית
• פונקציות: MAX/MIN recording, Data Hold, Auto Power-Off

9.2 TS-710 Light Meter

• Light Measurement Range: 0.1 to 200,000 Lux / 0.1 to 20,000 FC
• חיישן: 180° Rotating Sensor
• מידות נוספות: טמפרטורת סביבה, לחות
• לְהַצִיג: מסך LCD בגודל 2.25 אינץ' עם תאורה אחורית
• פונקציות: MAX/MIN recording, Data Hold, Auto Power-Off

10. אחריות ותמיכה

TopTes products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the TopTes official website or your purchase documentation. Please have your model numbers (TS-501B, TS-710) and purchase date available when contacting support.