REPTITRIP PT02 Reptile Dimming Thermostat

1. הקדמה

The REPTITRIP PT02 Reptile Dimming Thermostat is designed to provide precise and stable temperature control for various heating equipment in reptile enclosures, incubators, and plant breeding setups. Utilizing PID technology, it accurately adjusts output power to maintain a consistent temperature, minimizing fluctuations that can stress animals. This manual provides detailed instructions for the safe and effective use of your thermostat.

2. תכונות מוצר

• PID Technology: Accurately controls device output power for stable and efficient temperature regulation, reducing sudden temperature changes. (Note: Not for use with T5 lamps, ניאון lamps, LED lamps, or sun lampס.)
• ניטור טמפרטורה בזמן אמת: Features a temperature probe that detects ambient temperature and adjusts output power accordingly. Control range: 68°F to 113°F (20°C to 45°C).
• Enhanced Reptile Health: Prevents temperature fluctuations and drastic lighting changes, contributing to the health and vitality of reptiles such as bearded dragons, lizards, ball pythons, chameleons, corn snakes, and turtles.
• יישומים מגוונים: Compatible with heating lamps, heating pads, and other equipment. Suitable for reptiles, amphibians, egg hatching, and plant seedlings. Maximum output load: 260W.
• תצוגת LCD: Shows real-time output power and environmental temperature for clear monitoring. LCD backlight turns off after 20 seconds to minimize disturbance at night. Switchable between °F and °C.
• תפעול קל: Simply set the desired temperature, and the thermostat will maintain it. Ensure the temperature probe is placed correctly in the area requiring control.

3. מידע בטיחות

אנא קרא והבן את כל הוראות הבטיחות לפני הפעלת מכשיר זה. אי ביצוע פעולה זו עלול לגרום לפציעה או נזק למוצר.

• Do not exceed the maximum output load of 260W.
• Ensure the thermostat is connected to a properly grounded power outlet.
• Keep the device and its probe away from water or excessive moisture.
• Do not use this thermostat with T5 lamps, ניאון lamps, LED lamps, or sun lamps. It is designed for dimmable heating elements only.
• Regularly inspect the power cord and probe for any signs of damage. Discontinue use if damage is found.
• הרחק מהישג ידם של ילדים וחיות מחמד.

4. תכולת החבילה

• REPTITRIP PT02 Dimming Thermostat Unit
• בדיקת טמפרטורה
• מדריך למשתמש

5. המוצר נגמרview

Familiarize yourself with the components and display of your REPTITRIP PT02 thermostat.

Image: Labeled diagram of the REPTITRIP PT02 thermostat showing the Timer Display, Power Meter, Current Temperature, Output Power, Setting Temperature, Switching °F/°C, Temp Setup Button, and On/Off & Timer Setup Button.

• תצוגת LCD: Shows current time, power meter, current temperature (PV), set temperature (SV), and output power percentage.
• לחצן מינוס (-): מקטין ערכים במהלך ההגדרה.
• כפתור פלוס (+): מגדיל ערכים במהלך ההגדרה.
• לחצן SET: Enters setting mode for time and temperature.
• כפתור אישור/הפעלה: Turns the device on/off and confirms settings.
• חיישן טמפרטורה: מזהה טמפרטורת סביבה.

6. הוראות התקנה

1. Placement of Temperature Probe:

   Carefully place the temperature probe in the area where you want to control the temperature. Ensure it is not directly touching the heating element or submerged in water unless specifically designed for such use. The probe detects if the current temperature reaches the set target.

   

   Image: A temperature probe is shown placed within a reptile enclosure, illustrating proper positioning for accurate temperature detection.

2. הפעלה:

   Plug the thermostat into a standard 120VAC, 60Hz power outlet. Press the OK לחצן כדי להפעיל את המכשיר.

   

   Image: A finger pressing the 'OK' button on the thermostat to power it on.
3. הגדר זמן נוכחי:

   הקש על מַעֲרֶכֶת button. The time display will flash. Use the - ו + לחצו על הכפתורים כדי לכוונן את השעה והדקה. OK כדי לאשר כל הגדרה.

   

   Image: The thermostat display showing the time setting interface, with a finger pressing the 'SET' button.

4. חיבור מכשיר חימום:

   Plug your heating lamp or heat pad into the thermostat's output socket. Ensure the heating device is compatible with dimming control and does not exceed the 260W maximum load.

   

   Image: The thermostat unit with its output socket connected to both a heat mat and a heat lamp, demonstrating its versatility.

7. הוראות הפעלה

1. Setting Target Temperature (SV):

   With the device on, press the מַעֲרֶכֶת button once. The set temperature (SV) will flash. Use the - ו + buttons to adjust the desired temperature. Press OK to confirm the setting. The thermostat will now work to maintain this temperature.

   

   Image: A finger pressing the '+' button to increase the set temperature on the thermostat display.

2. יחידות טמפרטורה להחלפה (°F/°C):

   כדי לעבור בין פרנהייט לצלזיוס, לחץ והחזק את המקש מַעֲרֶכֶת button for approximately 3 seconds until the unit flashes. Use the - or + button to select your preferred unit, then press OK כדי לאשר.

3. הבנת התצוגה:

   The display shows the current temperature (PV), the set temperature (SV), and the output power percentage. The power meter bars indicate the current power output to the heating device. As the ambient temperature approaches the set temperature, the output power will gradually decrease (dimming) to maintain stability.

   

   Image: A graphical representation of the PID dimming thermostat operation, showing how output power (represented by light bulb brightness) is adjusted to maintain a stable set temperature.

4. פונקציית טיימר (אם רלוונטי):

   The thermostat supports a timer function for a set duration. To activate, press the OK button to turn on the device. Press מַעֲרֶכֶת to enter the time setting mode. Adjust the hours using the - ו + כפתורים. ללחוץ OK to confirm. The device will maintain the set temperature for the specified duration. Note: The device does not have an internal clock for setting a specific start time; the timer begins when activated.

   

   Image: The thermostat display showing a timer set for 12 hours and a target temperature of 104°F, indicating the device will maintain this temperature for the set duration.

8. תחזוקה

• ניקוי: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• טיפול בבדיקה: Keep the temperature probe clean and free from debris. Avoid bending or damaging the probe cable.
• אִחסוּן: When not in use, store the thermostat in a cool, dry place away from direct sunlight.

9. פתרון תקלות

10. מפרטים

11. אחריות ותמיכה

REPTITRIP products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your PT02 Dimming Thermostat, please contact REPTITRIP customer service through the retailer where you purchased the product or visit the official REPTITRIP website for contact details. Please have your model number (PT02) and purchase information ready when contacting support.