1. המוצר נגמרview
The HitLights COB LED Strip Light (Model L0512V-303-1630-U-BLK) is a premium 16.4ft (5-meter) 12V tape light designed for custom indoor lighting installations. Featuring Chip-on-Board (COB) technology, this strip provides high-density, uniform, and spotless illumination, eliminating visible hot spots. With 2400 LEDs per reel, a brightness of 305+ lumens per foot, and a high Color Rendering Index (CRI) of 90+, it ensures accurate and vibrant color reproduction. This specific model emits a warm white light at 3000K, ideal for creating a comfortable and inviting ambiance.
תכונות עיקריות:
- COB Technology: Delivers smooth, continuous, and spotless lighting.
- High Density: 2400 LEDs per 16.4ft reel for superior light output.
- לבן חם (3000K): יוצר אווירה נעימה ומזמינה.
- CRI גבוה 90+: Ensures accurate color rendering.
- רשום UL: מאושר לבטיחות ואיכות.
- התקנה קלה: Features 3M strong self-adhesive backing.
- עיצוב ניתן לחיתוך: Can be cut every 0.98 inches to fit specific lengths.
- תאימות אוניברסלית: Works with most dimmers using ELV, TRIAC, DMX, Dali, 0-10V, RF protocols.
מה יש בקופסה:
- 1 x 16.4ft (5m) 12V COB LED Tape Light
- תפסי הרכבה
- מדריך למשתמש
Note: A 12V power source and dimmer (if desired) are required for operation and are sold separately. This product is the strip only, not a complete kit.
2. מידע בטיחות
- This LED strip light is rated IP30 and is intended for שימוש פנימי בלבדאין לחשוף למים או ללחות גבוהה.
- ודא שספק החשמל מנותק לפני התקנה או תחזוקה.
- Use only with a compatible 12V DC power supply. Connecting to a higher voltage will damage the strip.
- אין לכופף את רצועת הלד בחדות או להפעיל כוח מופרז, מכיוון שהדבר עלול לפגוע במעגלים הפנימיים.
- הרחק מהישג ידם של ילדים.
- הימנעו מחשיפה ישירה של העיניים למקור האור כאשר הוא מואר.
3. התקנה והתקנה
Follow these steps for proper installation of your HitLights COB LED Strip Light:
- תכנן את הפריסה שלך: Measure the desired installation area. The strip can be cut at designated marks (approximately every 0.98 inches) to achieve the perfect length. Use the included mounting clips for additional security, especially on uneven surfaces or for longer runs.
- הכן את המשטח: Ensure the installation surface is clean, dry, and smooth. Wipe away any dust, grease, or moisture.
- לקלף ולהדביק: Carefully peel off the protective backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, working in small sections to avoid air bubbles.
- התחבר לכוח: Connect the LED strip to a compatible 12V DC power supply (sold separately). Ensure polarity is correct (positive to positive, negative to negative). If using a dimmer, connect it between the power supply and the LED strip according to the dimmer's instructions.
- מִבְחָן: Once connected, turn on the power supply to test the lights.
4. הוראות הפעלה
Once installed and connected to a 12V DC power supply, your HitLights COB LED Strip Light will illuminate. If you have integrated a compatible dimmer (sold separately), you can adjust the brightness of the strip. The strip is compatible with various dimmer types, including ELV, TRIAC, DMX, Dali, 0-10V, and RF control protocols.
5. תחזוקה
The HitLights COB LED Strip Light requires minimal maintenance. To ensure longevity and optimal performance:
- ניקוי: Gently wipe the surface of the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- סְבִיבָה: As an IP30 rated product, keep the strip away from water, high humidity, and extreme temperatures.
- חיבורים: בדקו מעת לעת את כל החיבורים כדי לוודא שהם מאובטחים וחופשיים מקורוזיה.
6. פתרון תקלות
If you encounter issues with your LED strip, refer to the following common problems and solutions:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| פס הלד לא נדלק. | No power, incorrect connection, faulty power supply. | Check if the power supply is plugged in and receiving power. Verify all connections are secure and correct polarity (+ to +, - to -). Test the power supply with another device if possible. |
| LED strip flickers or dims unexpectedly. | Incompatible dimmer, loose connection, insufficient power supply. | Ensure your dimmer is compatible with 12V LED products and the specified control protocols. Check all connections for looseness. Verify your power supply wattage is sufficient for the length of the strip. |
| Sections of the strip are not lighting up. | Damage to the strip, improper cutting. | Inspect the unlit section for visible damage or improper cuts. Ensure cuts were made only at designated cut marks. |
If you continue to experience issues, please contact HitLights customer service for assistance.
7. מפרטים
| תְכוּנָה | פְּרָט |
|---|---|
| מספר דגם | L0512V-303-1630-U-BLK |
| טמפרטורת צבע | 3000K לבן חם |
| מֶשֶׁך | 16.4 מטר |
| רוחב לוח | 10mm (0.4in) |
| קלט כרךtage | DC 12V |
| כוח פלט מרבי | 50W |
| שבבי LED | 2400 LEDs/reel |
| Lumens per Foot | 305+ LM/FT |
| CRI (Ra) | 90+ |
| דירוג IP | IP30 (שימוש פנימי בלבד) |
| מרווח חיתוך | Every 0.98 inches |
| תוחלת חיים | 60,000 שעות |
| חוֹמֶר | פּלָסטִי |
| UPC | 850053778117 |
8. Understanding Color Temperature
Choosing the right color temperature is crucial for achieving the desired ambiance in your space. The video below provides a comprehensive guide on understanding different LED color temperatures and their applications.
The 3000K Warm White of this HitLights COB LED Strip is specifically designed to enhance warm tones like wood and brick, making reds, yellows, and oranges more vibrant, while subtly muting greens and blues. This creates a comfortable and inviting environment, making it a popular choice for residential areas like living rooms, bedrooms, and under-cabinet lighting.
9. אחריות ותמיכה
HitLights COB LED Strip Lights are UL Listed and designed for a long lifespan of 60,000 hours, which translates to approximately 16 years with 10 hours of daily use. We stand by the quality of our products with a אחריות לשנתיים.
Our dedicated US-based customer service team is available to assist you with any questions regarding installation, troubleshooting, or replacements. Please do not hesitate to contact us for support.
Please note that packaging may change without prior notice. Always double-check the light specifications to ensure compatibility with any accessories you purchase.