מדריך למשתמש iSonic CSGJ01-8OZx1 תמיסת ניקוי אולטרסאונד לתכשיטים/משקפיים

המוצר נגמרview

The iSonic CSGJ01-8OZx1 Ultrasonic Jewelry/Eye Wear Cleaning Solution Concentrate is designed to enhance the cleaning performance of ultrasonic cleaners. This concentrated solution effectively removes smudges, lotions, and fingerprints, restoring sparkle and clarity to various items.

Image: A bottle of iSonic CSGJ01-8OZx1 Ultrasonic Jewelry/Eye Wear Cleaning Solution Concentrate. The bottle is blue and clear, showing the liquid inside, with a white cap and a label detailing the product name and usage instructions.

This product is formulated to be biodegradable and phosphorus-free, making it suitable for regular use. It is highly concentrated, requiring only a small amount to be mixed with water for effective cleaning.

מידע בטיחות

Always read and understand all instructions before using this product. Keep out of reach of children. Avoid ingestion. In case of eye contact, flush with water immediately. If irritation persists, seek medical attention.

Image: A circular label with a green leaf icon and the text "NON-TOXIC", indicating the product's safety feature.

This product is biodegradable and does not contain phosphorus. Store in a cool, dry place away from direct sunlight.

הגדרה

Before using the iSonic cleaning solution, ensure you have an ultrasonic cleaner and a clean, stable surface for operation.

1. Prepare the Ultrasonic Cleaner: Ensure your ultrasonic cleaner is clean and empty.
2. Dilute the Solution: The iSonic CSGJ01-8OZx1 is a concentrate. Mix the solution with tap water at a ratio of 1:20 to 1:40. For most personal ultrasonic cleaners, a capful of the concentrate is sufficient for approximately 1 pint (20 ounces) of water.
3. מלא את המיכל: Carefully pour the diluted solution into the ultrasonic cleaner's tank, ensuring not to exceed the maximum fill line.

Image: A visual guide showing four steps: 1. Fill with water & solution, 2. Place the jewelry/retainer, 3. Run the cleaner, 4. Enjoy the sparkle. This illustrates the setup and operating process.

הוראות הפעלה

Follow these steps for optimal cleaning results:

1. הנח פריטים בסל: Gently place the items to be cleaned (jewelry, eyeglasses, watches, etc.) into the cleaning basket of your ultrasonic cleaner. Ensure items are fully submerged in the solution but do not overcrowd the basket.
2. התחלת מחזור ניקוי: Close the lid of the ultrasonic cleaner and start the cleaning cycle according to your cleaner's instructions. The duration of the cycle may vary depending on the item and the level of dirt.
3. שטיפת פריטים: Once the cleaning cycle is complete, carefully remove the basket and rinse the cleaned items thoroughly under clean tap water.
4. פריטים יבשים: Dry the items with a soft, lint-free cloth. Observe the restored sparkle and clarity.

Image: A hand pouring the blue iSonic cleaning solution concentrate into an ultrasonic cleaner, demonstrating the dilution step before cleaning.

The solution is effective for various items including diamonds, other jewelry, watches, and eyeglasses. It is also suitable for general cleaning purposes.

תַחזוּקָה

Proper maintenance of your cleaning solution and ultrasonic cleaner ensures longevity and consistent performance.

• החלפת פתרון: Replace the cleaning solution in your ultrasonic cleaner regularly, especially when it appears cloudy or dirty, to maintain optimal cleaning effectiveness.
• Cleaner Maintenance: Refer to your ultrasonic cleaner's manual for specific cleaning and maintenance instructions. Always unplug the cleaner before cleaning its tank.
• אִחסוּן: Store the iSonic CSGJ01-8OZx1 concentrate bottle in a cool, dry place, away from direct sunlight and out of reach of children. Ensure the cap is tightly sealed after each use.

פתרון בעיות

אם נתקלת בבעיות, שקול את הפתרונות הנפוצים הבאים:

• Items Not Clean Enough:
  • Ensure the solution is properly diluted (1:20 to 1:40 ratio).
  • Increase the cleaning cycle duration.
  • Replace old or dirty cleaning solution with fresh solution.
  • ודאו שהפריטים שקועים לחלוטין ואינם צפופים מדי.
• Residue on Items:
  • Rinse items thoroughly with clean water after cleaning.
  • Ensure the ultrasonic cleaner's tank is clean before adding solution.
• Solution Appears Cloudy Quickly:
  • This indicates effective cleaning and removal of contaminants. Replace the solution as needed.

מפרטים

אחריות ותמיכה

For information regarding product warranty, please refer to the official iSonic website or contact iSonic customer support directly. Unauthorized dealers' products are not approved by iSonic, and purchasing from them may void any implied warranty.

לתמיכה טכנית או שאלות, אנא בקרו באתר iSonic Store on Amazon או הפקיד שלהם webאֲתַר.