Monstake Automatic Soap Dispenser

מָבוֹא

תודה על הרכישהasing the Monstake Automatic Soap Dispenser. This device is designed to provide a hygienic and convenient handwashing experience with its touchless operation and smart features. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.

מידע בטיחות

• Do not immerse the dispenser in water. The device is IPX5 waterproof, meaning it is protected against low-pressure water jets, but not full submersion.
• Avoid using soaps with particles or exfoliating beads, as these can clog the dispenser mechanism.
• Keep out of reach of small children to prevent misuse or accidental ingestion of soap.
• השתמשו רק בכבל הטעינה המצורף לטעינה.
• Ensure the installation surface is clean and dry before applying the traceless adhesive sticker.

תוכן החבילה

• 1 x Automatic Soap Dispenser
• 1 x Traceless Sticker (for wall mounting)
• 1 x מדריך הוראות
• 1 x כבל טעינה

מדריך התקנה

1. טעינת המתקן

Before first use, fully charge the dispenser. The built-in 2500mAh battery charges in 2-3 hours and can last up to 4 months on a single charge.

איור 1: Charging the Monstake Automatic Soap Dispenser. Connect the provided USB charging cable to the dispenser's charging port and a power source.

2. התקנת קיר

The dispenser can be easily wall-mounted using the traceless adhesive sticker, requiring no drilling. Ensure the installation surface is smooth and dry (e.g., tile, marble, glass wall).

1. Clean the desired wall surface thoroughly and ensure it is dry.
2. Peel off the protective film from the traceless adhesive sticker.
3. Firmly press the sticker onto the wall at the desired location. It is recommended to install the dispenser approximately 0.65 ft (20 cm) above the countertop.
4. Allow the adhesive to set for at least 24 hours before mounting the dispenser.
5. Align the dispenser with the mounting bracket on the sticker and slide it down to secure it in place.

איור 2: No-drill wall mounting installation using the traceless adhesive sticker. Suitable for smooth and dry wall surfaces.

3. Filling the Dispenser with Soap

The dispenser has a large capacity of 450 ml (16 oz).

1. Locate the rubber piece on the top of the dispenser and remove it to reveal the filling port.
2. Pour foam soap directly into the dispenser.
3. If using gel soap (hand soap, dish soap, body wash), dilute it with water before filling. The recommended dilution ratio is 10-30% gel/liquid soap to 30-70% water. Mix thoroughly.
4. Replace the rubber piece securely after filling.

איור 3: Filling the dispenser with soap. Foam soap can be added directly. Gel soap requires dilution with water (10-30% soap, 30-70% water).

הוראות הפעלה

1. הפעלה/כיבוי

Locate the power button on the side of the dispenser. Press and hold to turn the device on or off.

2. Using the Smart Display

The large oval screen provides real-time information:

• פונקצית שעון: Displays the current time (12-hour/24-hour adjustable).
• תצוגת טמפרטורה: Shows real-time temperature (Fahrenheit/Celsius adjustable).
• Foam Level Indicator: Shows the selected foam dispensing level (1-3).
• מצב סוללה: מציין את חיי הסוללה שנותרו.
• Liquid Status: Provides a low liquid reminder.

איור 4: Full-screen smart display, clear at a glance, showing various indicators.

3. Adjusting Foam Levels

The dispenser offers adjustable foam levels (1-3) to suit your preference. Use the settings button on the side to cycle through the levels:

• רמה 1: Foaming for 0.6 seconds.
• רמה 2: Foaming for 1.0 seconds.
• רמה 3: Foaming for 1.5 seconds.

איור 5: Adjustable foam levels for customized dispensing.

4. חלוקת סבון

Once powered on and filled, simply place your hand under the sensor located at the bottom of the dispenser. The touchless sensor will activate, and the selected amount of foam will be dispensed.

איור 6: Touchless operation for hygienic soap dispensing.

תַחזוּקָה

ניקוי

To clean the exterior of the dispenser, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents. Avoid getting water into the charging port or sensor area.

תאימות סבון

For optimal performance, use foam soap directly. If using gel soap, ensure it is diluted as per the instructions in the 'Filling the Dispenser with Soap' section. Avoid particle-containing soaps to prevent clogging and damage to the internal mechanism.

פתרון בעיות

מפרטים

אחריות ותמיכה

Monstake provides a one-year warranty service, including replacement. For any support inquiries or to claim warranty service, please contact the after-sales team through Amazon or refer to the contact information provided on the after-sales card included in your package.

For further assistance, visit the official Monstake Store on Amazon: Monstake Store