Wampler CATACOMBS
Wampler Catacombs Reverb and Delay Pedal User Manual
Model: CATACOMBS
מָבוֹא
ה-Wampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
המוצר נגמרview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.

איור 1: חֲזִית view של ה-Wampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.

איור 2: בזווית view של ה-Wampler Catacombs pedal, highlighting its compact design and various control knobs.
הגדרה
דרישות חשמל
ה-Wampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
חיבור הדוושה
- חברו את כלי הנגינה שלכם (למשל, גיטרה) ל MONO IN or STEREO IN שקע בצד ימין של הדוושה באמצעות כבל כלי נגינה סטנדרטי בגודל 1/4 אינץ'.
- חבר את MONO OUT or OUT STEREO שקע בצד שמאל של הדוושה אל שלך amplifier או דוושת האפקט הבאה.
- Connect the 9V DC power supply to the 9V DC שקע קלט.
- For MIDI control, connect a MIDI cable to the MIDI קֶלֶט.
הוראות הפעלה
השליטה נגמרהview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
שמירה וקריאה של הגדרות קבועות מראש
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
תַחזוּקָה
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- יש לאחסן את הדוושה במקום קריר ויבש, הרחק מאור שמש ישיר וטמפרטורות קיצוניות.
- נתק את החשמל כאשר אינו בשימוש למשך פרקי זמן ממושכים.
- בדקו באופן קבוע את כל חיבורי הכבלים כדי לוודא שהם מותאמים היטב.
פתרון בעיות
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| אין צליל כאשר הדוושה לחוצה. | ספק כוח לא תקין, כבלים פגומים, חיבורי קלט/פלט שגויים. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | פעולה שגויה של מתג הרגליים. | ודא שאתה מחזיק את Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | לולאת הארקה, ספק כוח פגום, הפרעות. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
מפרטים
- דֶגֶם: CATACOMBS
- מידות: 7.25 x 5.7 x 3.75 אינץ'
- משקל פריט: 1.39 פאונד
- מקור כוח: Corded Electric (9V DC, center-negative, power supply not included)
- פורמט אותות: אנלוגי
- אפקטים של פלט שמע: עיכוב, ריברב
- Sampשיעור ling: 48 קילו-הרץ
- Audio Bit Depth: 24 סיביות
- הגדרות קבועות מראש: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
אחריות ותמיכה
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampler דוושות webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם. שמרו את הוכחת הרכישה שלכם לצורך תביעות אחריות.
לסיוע נוסף, בקר ב- Wampler Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.