STC-3028 24V Temperature & Humidity Controller User Manual

המוצר נגמרview

The STC-3028 is a versatile 24V temperature and humidity controller designed for precise environmental management. It features a dual digital display for simultaneous monitoring of temperature and humidity, making it ideal for applications such as incubators, terrariums, and other controlled environments. This device supports both heating/cooling and humidifying/dehumidifying functions.

Image: The STC-3028 controller unit with its integrated temperature and humidity sensor. The controller features a dual digital display showing temperature in red and humidity in blue.

מפרט טכני

Image: Diagram showing the dimensions of the STC-3028 controller: 75mm (2.95 inches) length, 85mm (3.34 inches) width, and 27mm (1.06 inches) height.

תוכן החבילה

החבילה כוללת את הפריטים הבאים:

• 1 x STC-3028 Temperature and Humidity Controller
• 1 x Integrated Sensor (for temperature and humidity measurement)

התקנה והתקנה

תרשים חיווט

Proper wiring is crucial for the safe and correct operation of the STC-3028 controller. Refer to the diagram below for connection details.

Image: A visual representation of the STC-3028 wiring diagram. It shows terminals for power supply (1-2), humidity sensor (3-5), and output relays for temperature (6-7) and humidity (8-9). The diagram also indicates voltage options (110-220VAC, 12V, 24V) and important notes regarding distinguishing interfaces and maintaining proper wire distance.

הערות חשובות:

• Strictly distinguish the interface of the relay, sensor, and power supply.
• Strictly distinguish the connection of the sensor and power supply.
• The sensor down-lead and power wire should be kept a proper distance apart to avoid interference.
• ודא את הכרך הנכוןtage (24V) is supplied as indicated on the unit.

הַרכָּבָה

The STC-3028 is designed for panel mounting. Ensure adequate space for ventilation, especially around the heat dissipation grids on the sides of the unit.

Image: The STC-3028 controller with a visual representation of air flowing through its side vents, indicating effective heat dissipation. The image highlights the cooling grid design for efficient cooling.

הוראות הפעלה

Setting Startup Temperature/Humidity

1. הקש על "לְמַעלָה" button once to display the current starting temperature or humidity setting.
2. לחץ לחיצה ארוכה על "לְמַעלָה" button for approximately 3 seconds until the display flashes.
3. השתמש ב- "לְמַעלָה" ו "לְמַטָה" keys to adjust the desired starting temperature or humidity value.
4. The setting will automatically save after a few seconds of inactivity or by pressing another button.

Setting Stop Temperature/Humidity

1. הקש על "לְמַטָה" button once to display the current stop temperature or humidity setting.
2. לחץ לחיצה ארוכה על "לְמַטָה" button for approximately 3 seconds until the display flashes.
3. השתמש ב- "לְמַעלָה" ו "לְמַטָה" keys to adjust the desired stop temperature or humidity value.
4. The setting will automatically save after a few seconds of inactivity or by pressing another button.

Temperature/Humidity Correction (Calibration)

To correct or calibrate the temperature and humidity readings:

• הקש על "לְמַעלָה" ו "לְמַטָה" כפתורים בו זמנית.
• Follow the on-screen prompts to adjust the offset for temperature or humidity. Refer to the product's advanced settings for detailed calibration procedures if available.

תַחזוּקָה

• ניקוי: נגבו את היחידה באופן קבוע במטלית רכה ויבשה. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• טיפול בחיישנים: Keep the integrated sensor clean and free from dust or debris to ensure accurate readings. Avoid exposing the sensor to extreme physical shock or moisture beyond its operating range.
• אוורור: Ensure the ventilation grids on the sides of the unit are not obstructed to allow for proper heat dissipation.
• ניתוק חשמל: Always disconnect power before performing any maintenance or wiring adjustments.

פתרון בעיות

אחריות ותמיכה

For warranty information and technical support, please contact Shutao customer service. Keep your purchase receipt as proof of purchase.

Contact information may be available on the product packaging or the manufacturer's official webאֲתַר.