1. הקדמה
Thank you for choosing the ShockFlo Type 2 EV Charging Cable. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EV charger. Please read this manual thoroughly before using the product and retain it for future reference.
This portable EV charging cable is designed to provide a convenient and reliable charging solution for your electric vehicle, offering adjustable current settings and a delayed start function to optimize your charging experience.
2. הוראות בטיחות
Always adhere to the following safety guidelines to prevent injury, damage, or malfunction:
- ודא שכבל הטעינה והמחברים נקיים מנזק לפני כל שימוש. אין להשתמש אם חלק כלשהו פגום.
- Connect the charger only to a properly grounded CEE 1-phase socket that meets local electrical codes.
- Do not immerse the control box or connectors in water. While the unit is IP67 waterproof, it is not designed for submersion.
- הרחק ילדים וחיות מחמד מאזור הטעינה במהלך הפעולה.
- Avoid touching the charging pins directly.
- Do not attempt to open, disassemble, or modify the charger. This will void the warranty and may cause safety hazards.
- The charger is equipped with 10 safety protections, including lightning protection, current leakage protection, ground fault protection, undervoltagההגנה, overvoltage protection, overload protection, overheating protection, and overcurrent protection.
- In case of any abnormal operation or error, immediately disconnect the charger from the power source and the vehicle.
3. המוצר נגמרview
3.1 רכיבים
- ShockFlo Type 2 EV Charging Cable with CEE 1-phase plug (32A, 7kW, 6m)
- Control Box with LCD Display
- Type 2 Vehicle Connector
- Detachable Controller Holder (for wall mounting)
- תיק אחסון
3.2 תכונות עיקריות
- טעינה מהירה: Delivers up to 7kW power, providing approximately 40 km of range per hour at 230V, 32A.
- זרם מתכוונן: Selectable current settings (10A, 16A, 20A, 24A, 32A) to match your electrical circuit capacity.
- פונקציית התחלה מושהית: Schedule charging to begin at a later time, allowing you to take advantage של תעריפי חשמל מחוץ לשיא.
- עיצוב 2 ב-1: Functions as both a portable charger and a wall-mounted charging station with the included detachable holder.
- 6-Meter Cable: מספק ample להגיע לטעינה נוחה.
- תאימות רחבה: Compatible with all Type 2/CCS charging ports, suitable for most electric vehicles including Volkswagen, Tesla, Renault, Hyundai, SMART, Opel, Skoda, and BMW.
- תצוגת HD LCD: Clearly shows real-time charging data such as current, charging rate, and voltage.
- בנייה חזקה: Made from high-quality, shock-resistant, and drop-proof materials.
4. התקנה
4.1 Wall-Mounted Installation (Optional)
If you prefer a fixed charging station, use the detachable controller holder to mount the control box to a suitable wall. Ensure the mounting location is secure, protected from direct sunlight and heavy rain, and within reach of your vehicle and a CEE 1-phase power outlet.
- Select a sturdy wall surface capable of supporting the charger's weight.
- Mark the drilling points using the detachable holder as a template.
- קדחו חורים והכניסו עוגנים מתאימים לקיר.
- Secure the detachable holder to the wall using screws.
- Slide the control box onto the mounted holder.
4.2 שימוש נייד
For portable use, simply place the control box on a stable, dry surface near your vehicle and the power outlet. Ensure the cable is not stretched or kinked.
5. הוראות הפעלה
5.1 נוהל טעינה בסיסי
- Ensure your vehicle is parked and turned off.
- Plug the CEE 1-phase power plug into a suitable wall socket. The control box LCD will illuminate.
- פתח את מכסה שקע הטעינה של הרכב.
- Insert the Type 2 vehicle connector firmly into your vehicle's charging port. Ensure it clicks into place.
- The charger will initiate a self-check, and then charging will begin automatically with the last set current. The green indicator light will flash.
- To stop charging, first disconnect the Type 2 connector from the vehicle, then unplug the CEE power plug from the wall socket.
5.2 כוונון הזרם
Before connecting the Type 2 connector to your vehicle, you can adjust the charging current:
- With the CEE plug connected to the wall socket but the Type 2 connector not yet connected to the vehicle, press the 'CURRENT' button on the control box.
- Cycle through the available current options: 10A, 16A, 20A, 24A, 32A.
- Select the desired current based on your vehicle's requirements and your electrical circuit's capacity.
- Once the current is set, connect the Type 2 connector to your vehicle to begin charging.
5.3 Setting Delayed Start
To schedule charging for a later time:
- With the CEE plug connected to the wall socket but the Type 2 connector not yet connected to the vehicle, press the 'DELAY' button on the control box.
- Each press will increase the delay time in hourly increments (e.g., 1 hour, 2 hours, up to 12 hours).
- Once the desired delay is set, connect the Type 2 connector to your vehicle. The charger will display the countdown and begin charging after the set delay.
5.4 נוריות חיווי
- אור ירוק דולק: טעון מלא.
- אור ירוק מהבהב: טעינה בעיצומה.
- נורה אדומה דולקת: מצב המתנה.
- אור אדום מהבהב: Error detected. Refer to the Troubleshooting section.
6. תחזוקה
- ניקוי: Disconnect the charger from all power sources and the vehicle before cleaning. Use a soft, dry cloth to wipe the control box and cables. Do not use harsh chemicals or abrasive cleaners.
- אִחסוּן: When not in use, store the charging cable neatly in the provided storage bag. Avoid kinking or bending the cable sharply. Store in a dry, cool place away from direct sunlight and extreme temperatures.
- בְּדִיקָה: Regularly inspect the cable, connectors, and control box for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact customer support.
7. פתרון תקלות
If you encounter issues, refer to the following table. If the problem persists, contact customer support.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| המטען לא נדלק | No power from socket; CEE plug not fully inserted; internal fault. | Check power outlet; ensure CEE plug is fully inserted; try a different outlet. |
| Red indicator light flashing (Error) | זרם יתר, overvoltagה, undervoltage, overheating, ground fault, leakage current, or other safety protection triggered. | Disconnect charger from vehicle and power source. Wait a few minutes, then reconnect. Check for visible damage to cable/connectors. Ensure vehicle's charging port is clean. If error persists, contact support. |
| טעינה לא מתחילה | Type 2 connector not fully inserted; vehicle not ready to charge; delayed start set; current too low for vehicle. | Ensure Type 2 connector is securely latched; check vehicle's charging status; verify delayed start setting; adjust current to a higher setting if necessary. |
| מהירות טעינה איטית | Current setting is low; vehicle's onboard charger limitation; power supply limitation. | Increase current setting on the control box (if safe for your circuit); consult your vehicle's manual for charging capabilities. |
8. מפרטים
| תכונה | מִפרָט |
|---|---|
| מותג | ShockFlo |
| שם הדגם | מטען EV סוג 2 |
| מספר מוצר | CG07 |
| קלט כרךtage | 230 וולט |
| פלט כרךtage | 230 וולט |
| Ampלמחוק | 32 Amperes (Adjustable: 10A, 16A, 20A, 24A, 32A) |
| מהtage / כוח | 7 קילוואט |
| אורך כבל | 6 מטר |
| סוג מחבר | CEE 1-phase plug to Type 2 vehicle connector |
| תְאִימוּת | All Type 2/CCS charging ports (e.g., Volkswagen, Tesla, Renault, Hyundai, SMART, Opel, Skoda, BMW) |
| אישורי בטיחות | IEC 62196-2 compliant, TUV certified |
| דירוג הגנה | IP67 (עמיד למים ואבק) |
| מידות המוצר | 44 x 34 x 13 ס"מ |
| משקל המוצר | 5 ק"ג |
9. אחריות ותמיכה
ShockFlo products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your EV charging cable, please contact ShockFlo customer service through the retailer where you purchased the product or visit the official ShockFlo webהאתר לפרטי יצירת קשר.
Please have your product model number (Type 2 EV Charger) and purchase date available when contacting support.