WALI FTM-2

WALI FTM-2 Full Motion TV Wall Mount Instruction Manual

Model: FTM-2

1. המוצר נגמרview

The WALI FTM-2 Full Motion TV Wall Mount is designed to securely hold most flat and curved screen televisions ranging from 32 to 70 inches. This mount offers extensive adjustability, including tilt, swivel, and extension, allowing for optimal viewing angles from various positions in a room. Constructed from reinforced cold-rolled steel, it ensures durability and stability for your television.

2. מידע בטיחות חשוב

אַזהָרָה: Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified installer. Improper installation may cause serious injury or damage.

  • קיבולת משקל: אין לחרוג מקיבולת המשקל המרבית של 40 ק"ג (88 ליברות). תושבת זו מיועדת לשימוש אך ורק עם המשקלים המרביים המצוינים. שימוש עם מוצרים כבדים יותר מהמשקלים המרביים המצוינים עלול לגרום לחוסר יציבות ולפציעה אפשרית.
  • סוג קיר: This mount is designed for installation on vertical wood studs, solid concrete walls, or brick walls. אין להתקין על קיר גבס בלבד. ודא שמשטח ההרכבה יכול לתמוך בבטחה במשקל המשולב של הציוד וכל החומרה המחוברת.
  • תאימות VESA: Ensure your TV's VESA mounting pattern is within the supported range (100x100mm to 400x400mm).
  • כְּלֵי עֲבוֹדָה: Use appropriate tools for installation. Always wear safety gear, including eye protection.
  • יְלָדִים: Keep children away from the installation area. Small parts may be a choking hazard.
Close-up of the WALI FTM-2 TV mount showing reinforced cold-rolled steel construction and an '88 lbs Strength Tested' label.

Image: The mount is constructed from reinforced cold-rolled steel, tested to support up to 88 lbs, ensuring structural integrity and safety for your television.

3. תכולת החבילה

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact WALI customer support.

  • WALI FTM-2 TV Wall Mount (1 unit)
  • ערכת חומרת הרכבה (ברגים שונים, דיסקיות, מרווחים, עוגנים)
  • מדריך למשתמש (מסמך זה)
Image showing all included hardware components for the WALI FTM-2 TV mount installation, including various screws, washers, and a spirit level.

Image: All necessary hardware for installation is included, such as various bolts, washers, spacers, and wall anchors. A spirit level is also provided to assist with accurate mounting.

4. בדיקת תאימות

Before installation, confirm your television and wall meet the following requirements:

  • גודל טלוויזיה: Compatible with most 32 to 70 inch flat or curved screen TVs.
  • משקל טלוויזיה: Your TV must weigh no more than 88 lbs (40 kg).
  • דפוס VESA: The mounting holes on the back of your TV must match VESA patterns from 100x100mm to 400x400mm.
  • סוג קיר: Suitable for 12" or 16" wood studs, concrete walls, and brick walls. Not for drywall-only installation.
Diagram illustrating TV compatibility requirements for the WALI FTM-2 mount, including TV weight up to 88 lbs, VESA patterns from 100x100mm to 400x400mm, and supported wall types (wood studs, concrete, brick).

Image: This diagram outlines the four key compatibility checks: TV weight (up to 88 lbs), VESA pattern (100x100mm to 400x400mm), TV size (32-70 inches), and suitable wall types (wood studs, concrete, brick). Installation on drywall alone is not supported.

5. הוראות התקנה

Follow these steps carefully for a secure installation. It is recommended to have two people for installation.

שלב 1: חברו את התושבת לקיר

  1. Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable.
  2. Mark the drill holes for the wall plate. Ensure the marks are level using a spirit level.
  3. Drill pilot holes at the marked locations. For wood studs, use a 5/32 inch (4mm) drill bit. For concrete/brick walls, use a 3/8 inch (10mm) drill bit and insert wall anchors.
  4. Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.

Step 2: Attach Plate to TV

  1. הניחו את הטלוויזיה כשפניה כלפי מטה על משטח רך ונקי כדי למנוע שריטות.
  2. זהה את חורי ההרכבה של VESA בגב הטלוויזיה שלך.
  3. בחרו את הברגים, הדיסקיות והמרווחים הנכונים מערכת החומרה שמתאימים לחורי ההרכבה של הטלוויזיה שלכם.
  4. Attach the TV brackets to the back of your TV. Ensure they are securely fastened but do not overtighten.

Step 3: Hang TV on Bracket

  1. בעזרתם, הרם בזהירות את הטלוויזיה וחבר את תושבות הטלוויזיה ללוח הקיר.
  2. Ensure the TV is centered and level.
  3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided.

6. Adjustments (Operating)

The WALI FTM-2 mount offers flexible adjustments to achieve your desired viewזווית ing.

  • הטיה: The TV can be tilted +3° upwards and -15° downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
  • לְהִסְתוֹבֵב: The mount allows for a ±60° swivel (left and right) depending on TV size and wall distance. Gently push or pull the TV to the desired swivel angle.
  • פִּלוּס: After installation, if the TV is slightly unlevel, you can adjust it by ±3°. Loosen the leveling screws, adjust the TV, and re-tighten.
  • הארכה/נסיגה: The mount extends from 2.6 inches (6.6 cm) to 14 inches (35.6 cm) from the wall. Gently pull the TV forward or push it back to adjust the distance.
Diagram illustrating the adjustment capabilities of the WALI FTM-2 TV mount, including 15 degree tilt, 60 degree swivel, 14 inch extension, and 4 degree leveling.

Image: This diagram shows the full range of motion: 15 degrees of tilt, 60 degrees of swivel, extension up to 14 inches from the wall, and 4 degrees of leveling adjustment for a perfect viewניסיון.

7. תחזוקה

תחזוקה שוטפת מבטיחה את אורך החיים ואת פעולתו הבטוחה של מתקן הקיר לטלוויזיה.

  • בדיקות תקופתיות: Periodically check that all screws and connections are tight and secure. Re-tighten if necessary.
  • ניקוי: נקו את התושבת בעזרת מטלית רכה ויבשה. הימנעו מחומרי ניקוי שוחקים או ממסים שעלולים לפגוע בגימור.
  • חלקים נעים: The articulating arms are designed for smooth movement. No lubrication is typically required. If movement becomes stiff, check for obstructions or loose components.

8. פתרון תקלות

אם נתקלת בבעיות במהלך ההתקנה או לאחריה, עיין בבעיות הנפוצות ובפתרונות הבאים:

  • הטלוויזיה אינה מאוזן: Use the leveling adjustment feature (refer to Section 6) to correct the angle. Ensure the wall plate was installed level initially.
  • הר מרגיש לא יציב: Double-check all wall and TV attachment screws to ensure they are securely tightened. Verify that the wall type is appropriate and that the TV weight does not exceed the mount's capacity.
  • הטלוויזיה לא מתאימה למתקן: Re-check your TV's VESA pattern against the mount's specifications (refer to Section 4). Ensure you are using the correct screws and spacers for your TV model.
  • Difficulty moving the arms: Ensure no cables are snagged or obstructing movement. Check for any overtightened bolts that might restrict articulation.

If problems persist, contact WALI customer support for assistance.

9. מפרטים

מספר דגםFTM-2
תאימות גודל טלוויזיה32 - 70 אינץ'
קיבולת משקל88 פאונד (40 ק"ג)
תאימות VESA100x100 מ"מ עד 400x400 מ"מ
זווית הטיה+3° / -15°
זווית מסתובבת±60°
התאמת פילוס±3°
הארכה מהקיר6.6 ס"מ (2.6 אינץ') עד 35.6 ס"מ (14 אינץ')
חוֹמֶרReinforced Cold-Rolled Steel
צֶבַעשָׁחוֹר

10. אחריות ותמיכת לקוחות

WALI products are designed for quality and reliability. For warranty information or technical assistance, please contact WALI customer support.

WALI is committed to providing dedicated product support and aims to respond to inquiries within 12 hours.

  • מַגָע: Refer to the WALI official webאתר או אריזת המוצר לקבלת פרטי הקשר העדכניים ביותר.
  • הוכחת רכישה: אנא שמור את הוכחת הרכישה שלך עבור תביעות אחריות.

© 2026 WALI. כל הזכויות שמורות.