tectake Bar Table with 4 Stools - Industrial Style

מָבוֹא

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

הוראות בטיחות

• ודא שכל הרכיבים קיימים ולא ניזוקו לפני ההרכבה. אין להשתמש אם חסרים או ניזוקו חלקים כלשהם.
• יש להרכיב את המוצר על משטח רך ונקי כדי למנוע שריטות.
• Tighten all screws and bolts securely, but do not overtighten to avoid damaging the material.
• בדקו באופן קבוע את כל החיבורים כדי לוודא שהם נשארים מהודקים.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• הרחק חלקים קטנים וחומרי אריזה מילדים כדי למנוע סכנת חנק.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

תוכן החבילה

Before starting assembly, please verify that all the following components are included in your package:

• 1 x שולחן בר
• 4 שרפרפי בר
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x מדריך הרכבה (מסמך זה)

Image: Detailed diagram of product dimensions and included components.

הוראות הרכבה

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. פרק רכיבים: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. הרכבת מסגרת השולחן: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. חיבור משטח שולחן: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. הרכבת מסגרות שרפרפים: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Attach Stool Seats: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. התקנת רגליים מתכווננות: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. הידוק סופי: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

הוראות הפעלה

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• יַצִיבוּת: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• חיסכון במקום: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• כושר העמסה: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• מיקום: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

תַחזוּקָה

Proper care will extend the life and appearance of your tectake furniture set:

• ניקוי: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• בדיקות רגילות: Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• הֲגָנָה: השתמשו בתחתיות לכוסות או במשטחי שולחן כדי להגן על משטח השולחן מפני שפיכות, חום ושריטות.
• סְבִיבָה: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

פתרון בעיות

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Wobbling Table/Stool:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• קושי במהלך ההרכבה:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • אין להדק את הברגים יתר על המידה עד שכל החלקים מחוברים באופן רופף, לאחר מכן הדקו אותם בהדרגה.
  • Refer to the assembly diagrams for correct orientation of parts.
• שריטות או שקעים:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

מפרטים

אחריות ותמיכה

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store