1. הקדמה
Thank you for choosing the OOYCYOO 100 Amp MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It is compatible with 12V and 24V battery systems and supports various battery types including AGM, Sealed, Gel, Flooded, and Lithium batteries.
2. הוראות בטיחות
- קרא בעיון את כל ההוראות לפני ההתקנה וההפעלה.
- Ensure all wiring is correctly polarized (positive to positive, negative to negative) to prevent damage.
- Always connect the battery to the charge controller first, before connecting solar panels. Disconnect solar panels first, then the battery.
- Use appropriate wire gauges for all connections to handle the rated current.
- Install the controller in a well-ventilated area to prevent overheating.
- Avoid short circuits and reverse polarity connections.
- אל תנסה לפרק או לתקן את הבקר בעצמך. צור קשר עם אנשי מקצוע מוסמכים לקבלת שירות.
3. תכונות מוצר
- MPPT (Maximum Power Point Tracking) technology for efficient solar energy harvesting (≥99% tracking rate, >98% conversion rate).
- עוצמת מערכת אוטומטית 12V/24Vtagזיהוי אלקטרוני.
- Compatibility with multiple battery types: USER (customizable for Lithium, LiFePO4, Li(NiCoMn)O2), Flooded, Sealed, and Gel batteries.
- User-programmable settings for absorption voltagה, כרך צףtagה, וכרך נמוךtage נתק.
- Comprehensive protection features: PV over current/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, TVS high voltage חולפים.
- Built-in cooling fan with intelligent temperature control (ON >45℃, OFF <40℃) and porous heat dissipation for extended lifespan.
- Blacklight LCD Display showing charge amount (KWH) and other parameters.
- Max PV input power: 1300W (12V system), 2600W (24V system).
- מקסימום PV מעגל פתוח כרךtagה: 100VDC.
4. תכולת החבילה
- 1 x OOYCYOO 100A MPPT Solar Charge Controller
- 1 x חיישן טמפרטורה
- מדריך למשתמש (אנגלית)
5. מפרטים
| פָּרָמֶטֶר | עֵרֶך |
|---|---|
| זרם טעינה מדורג | 100A |
| System Nominal Voltage | 12V/24V DC Auto Identifying |
| מקסימום PV Open Circuit Voltage | 100VDC |
| 12V System Max. PV Input Power | 1300W |
| 24V System Max. PV Input Power | 2600W |
| נפח העבודה הטוב ביותר של MPPTtagטווח e (12V) | DC18V-DC96V |
| נפח העבודה הטוב ביותר של MPPTtagטווח e (24V) | DC36V-DC96V |
| מסוף חשמל | 10 AWG |
| מידות המוצר | 12 x 7.8 x 3.2 אינץ' (30.48 x 19.81 x 8.13 ס"מ) |
| משקל פריט | 8.82 פאונד (4.0 ק"ג) |
| סוג תצוגה | LCD עם תאורה אחורית |
| טמפרטורת הפעלה | עד 45 מעלות צלזיוס |
6. התקנה והתקנה
6.1. Unboxing and Overview
Upon unboxing, inspect the charge controller for any visible damage. Familiarize yourself with the device's layout and connection points.



6.2. הַרכָּבָה
Mount the charge controller vertically on a non-flammable surface in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow, especially around the cooling fans.
6.3. חיבורי חיווט
Follow the wiring sequence carefully to avoid damage to the controller or batteries. The controller accepts up to 6 AWG wire for main power connections. Ensure all connections are tight and secure.
- חיבור סוללה: Connect the battery cables to the BATTERY terminals on the controller first. Ensure correct polarity (positive to positive, negative to negative).
- חיבור פאנל סולארי: Connect the solar panel cables to the SOLAR PANEL terminals. Ensure correct polarity.
- חיבור עומס (אופציונלי): If using the DC load output, connect your DC loads to the DC LOAD terminals. Ensure correct polarity.
- חיישן טמפרטורה: Plug the included temperature sensor into the designated port. Attach the sensor to the battery for accurate temperature compensation during charging.
For a visual guide on setting up a solar system with a charge controller and inverter, refer to the video below:
6.4. תצורה ראשונית
After all connections are made, the controller will power on. You may need to configure the battery type and system voltage if it's not automatically detected or if you are using a custom battery type like Lithium.

The controller features a blacklight LCD display for easy monitoring and configuration. Use the buttons to navigate through the menu and adjust settings as needed. For detailed instructions on setting battery parameters, refer to the specific section in the printed user manual.
7. הוראות הפעלה
The LCD display provides real-time information about your solar system. Use the navigation buttons (Menu, Up, Down, Enter) to view different parameters and access settings.
7.1. צג LCD מעלview
The display shows various parameters such as:
- PV Voltage ו-Current
- סוללה כרךtage and Charging Current
- טען כרךtage ו-Current
- אחוז קיבולת סוללהtage
- טמפרטורת סביבה
- Cumulative Power Generation (KWH)
- Error/Fault Indicators
7.2. Setting Battery Parameters
To optimize charging for your specific battery type, you can adjust parameters like absorption voltagה, צף כרךtagה, וכרך נמוךtage disconnect. Consult the detailed instructions in the full user manual for precise steps on how to enter the settings menu and modify these values.
7.3. בקרת עומס
The controller features a programmable load timer. You can set the load to turn on/off at specific times or based on battery voltage levels. This feature helps conserve battery power and manage your DC loads efficiently.
8. תחזוקה
- בדקו באופן קבוע את כל חיבורי החיווט לאיתור הידוק וקורוזיה.
- Keep the controller's cooling vents clear of dust and debris to ensure proper heat dissipation.
- Periodically inspect the battery terminals for corrosion and clean if necessary.
- עקוב אחר צג ה-LCD לאיתור קודי שגיאה או קריאות חריגות.
9. פתרון תקלות
If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, refer to the following general troubleshooting tips:
- אין תצוגה/אין חשמל: בדוק את חיבורי הסוללה וודא שמתח הסוללהtage מעל נפח ההפעלה המינימליtage.
- ללא טעינה: Verify solar panel connections and ensure sufficient sunlight. Check for any PV over current/short circuit protection activation.
- פריקת יתר של הסוללה: כוונן את עוצמת הקול הנמוכהtage disconnect setting if necessary. Ensure your loads are not exceeding the battery's capacity.
- קודי שגיאה: Consult the full user manual for a list of specific error codes and their corresponding solutions.
For issues related to battery activation or if your battery is not working as expected, the following video provides helpful steps:
10. אחריות ותמיכה
For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the OOYCYOO official webאתר. שמור את קבלת הרכישה כהוכחת קנייה.