1. הקדמה
This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your U.S. Solid Automatic Label Rewinder Machine, Model USS-LRW00010. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage.
Figure 1: U.S. Solid Automatic Label Rewinder Machine (Model USS-LRW00010)
2. מידע בטיחות
Always observe the following safety precautions to reduce the risk of injury or damage to the machine:
- Ensure the power supply matches the machine's requirements (AC 100V-240V, 50/60Hz).
- אין להפעיל את המכונה בידיים רטובות או במצבים דamp סביבות.
- הרחיקו ידיים ובגדים רפויים מחלקים נעים במהלך הפעולה.
- נתקו את המכונה מהחשמל לפני ניקוי או ביצוע כל תחזוקה.
- הנח את המכונה על משטח יציב ומאוזן.
3. תכולת החבילה
ודא שכל הפריטים נמצאים בחבילה:
- Label rewinder machine
- ספק כוח
- U pin (25mm core holder)
- 1.57" (40mm) core holder
- 3" (76mm) core holder
- L-shaped rod
- עצור מנוף
Figure 2: Included components: Label rewinder, power supply, various core holders, L-shaped rod, and stop lever.
4. המוצר נגמרview
Familiarize yourself with the main parts of the label rewinder.
איור 3: אחורי view of the rewinder, highlighting the power switch, speed control knob, and direction switch.
איור 4: חזית view of the rewinder with a label roll mounted on the core holder.
Figure 5: External dimensions of the label rewinder, including height, width, and depth measurements.
5. התקנה
5.1 Installing Core Holders
The rewinder supports 1-inch (25mm), 1.5-inch (40mm), and 3-inch (76mm) core holders. Select the appropriate core holder for your label rolls.
- Slide the desired core holder onto the rewinding shaft.
- Ensure it is securely in place. The core holders are designed for easy installation and removal without tools.
Figure 6: Various core holder sizes (76mm, 40mm, 25mm) and their installation methods.
5.2 Using Flange Plates and Stop Lever
The dual flange plates guide the outer edge of labels, ensuring an even roll, especially for smaller or special material labels. The stop lever helps maintain tension and alignment.
- Position the flange plates on the rewinding shaft to match the width of your labels.
- Adjust the stop lever to gently press against the label roll, providing stability.
Figure 7: Illustration of flange plates (2) and stop lever (1) for guiding labels and ensuring even winding.
6. תפעול
6.1 הפעלה וכיבוי
Connect the power supply to the machine and a suitable power outlet. Use the red power switch on the control panel to turn the machine on or off.
6.2 טעינת תוויות
After installing the correct core holder, feed the leading edge of your labels from the printer onto the core holder. Secure the label end to the core using tape if necessary.
6.3 כוונון מהירות
The rewinder features an induction lift lever design for auto-sensing and speed adjustment. Use the black knob on the control panel to fine-tune the rewinding speed, up to 200mm per second, to match your printer's output.
6.4 Changing Rewinding Direction
The bidirectional switch allows you to change the rewinding direction (forward or backward) to accommodate label face-in or face-out requirements.
Figure 8: Control panel with clearly marked Speed adjustment knob, Direction switch, and Power button.
6.5 Synchronized Operation with Printer
The rewinder is designed to synchronize its speed with your label printer. It will automatically stop if the printer ceases operation, preventing label jams or excessive tension.
Figure 9: The label rewinder working in conjunction with a label printer, demonstrating synchronized operation.
Video 1: Demonstration of the U.S. Solid Automatic Label Rewinder Machine in operation, showing labels being rewound from a printer.
7. תחזוקה
Regular maintenance ensures the longevity and optimal performance of your label rewinder.
- ניקוי: Periodically wipe down the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- בְּדִיקָה: Check for any loose parts or signs of wear. Ensure all connections are secure.
- אִחסוּן: When not in use, store the machine in a clean, dry environment away from direct sunlight and extreme temperatures.
8. פתרון תקלות
עיין בסעיף זה לקבלת בעיות נפוצות ופתרונותיהן.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| המכונה לא נדלקת | אין חשמל, חיבור רופף, ספק כוח פגום | Check power cable, ensure outlet is functional, verify power switch is ON. |
| Labels are not rewinding evenly | Improper flange plate adjustment, incorrect tension, label material issue | Adjust flange plates to match label width. Ensure stop lever provides gentle tension. Check label material for consistency. |
| Rewinder stops unexpectedly | Printer stopped, label jam, power interruption | Verify printer operation. Clear any label jams. Check power connection. The rewinder is designed to stop if the printer stops. |
| Labels are too loose or too tight | הגדרת מהירות שגויה | Adjust the speed control knob to match the printer's output speed and desired tension. |
9. מפרטים
Key technical specifications for the USS-LRW00010 model:
- שם הדגם: USS-LRW00010
- מותג: ארה"ב מוצק
- טכנולוגיית קישוריות: USB
- רוחב התווית המרבי: 120 מ"מ (4.72 אינץ ')
- Maximum Outer Diameter of Label Roll: 200 מ"מ (7.87 אינץ ')
- Core Holders Included: 1" (25mm), 1.5" (40mm), 3" (76mm)
- Rewinding Speed: Up to 200 mm/s (adjustable)
- Rewinding Direction: Bidirectional (forward/backward)
- Maximum Load-Bearing Weight: 2 ק"ג
- ספק כוח: AC 100V-240V, 50 / 60Hz
- משקל פריט: 2 ק"ג
- שיטת בקרה: Jog dial, Touch (switches)
- ארץ מוצא: סִין
- GTIN/UPC: 888107100355
10. אחריות ותמיכה
The U.S. Solid Automatic Label Rewinder Machine comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact U.S. Solid customer service through their official channels.