POTTER PSN-106B 10 AMP 6 NAC Power Supply User Manual

1. הקדמה

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the POTTER PSN-106B 10 AMP 6 NAC Power Supply. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

Figure 1: POTTER PSN-106B 10 AMP 6 NAC Power Supply. This image shows the front view of the power supply, highlighting its black casing and the layout of its connection terminals and status indicators.

2. מידע בטיחות

אַזהָרָה: Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before servicing to prevent electric shock or equipment damage.

• יש להקפיד תמיד על תקנות החשמל המקומיות והארציות.
• ודא הארקה נכונה של היחידה.
• אין לחשוף את היחידה ללחות או לטמפרטורות קיצוניות.
• ודא כרך קלטtage and current ratings before connecting to a power source.

3. המוצר נגמרview

The POTTER PSN-106B is a 10 AMP, 6 NAC (Notification Appliance Circuit) power supply designed for fire alarm and security applications. It provides regulated and filtered power to connected devices.

תכונות עיקריות:

• 10 Amp total output current.
• Six independently supervised Notification Appliance Circuits (NACs).
• Built-in battery charger for standby power.
• Fault monitoring and reporting capabilities.

4. התקנה והתקנה

4.1 הרכבת היחידה

1. Select a suitable location that is clean, dry, and free from excessive vibration or heat.
2. Mount the power supply securely to a wall or other stable surface using appropriate fasteners. Ensure adequate ventilation around the unit.

4.2 חיבורי חיווט

Refer to the wiring diagram provided inside the unit's enclosure for specific connection points. All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code).

• כניסת מתח AC: Connect the main AC power source to the designated terminals. Ensure the power source matches the unit's voltagדרישות ה.
• חיבורי סוללה: Connect standby batteries to the battery terminals, observing correct polarity. Batteries are essential for maintaining power during AC failures.
• NAC Outputs: Connect notification appliances (horns, strobes, etc.) to the NAC terminals. Each NAC is supervised for open and short circuits.
• יציאות עזר: Connect auxiliary devices requiring regulated power to the auxiliary power terminals.
• Trouble/Supervisory Relays: Connect these outputs to the main fire alarm control panel (FACP) for remote fault reporting.

5. הוראות הפעלה

5.1 הפעלה ראשונית

1. After all wiring is complete and verified, apply AC power to the unit.
2. Observe the status indicators. The AC POWER LED should illuminate steadily.
3. If batteries are connected, the BATTERY CHARGE LED should indicate charging status.

5.2 מחווני מצב

6. תחזוקה

Regular maintenance ensures the reliable operation of your PSN-106B power supply. All maintenance should be performed by qualified personnel.

• יַרחוֹן: Inspect the unit for any visible damage. Verify all status indicators are normal.
• מדי שנה: בדיקת סוללה כרךtage and capacity. Replace batteries as recommended by the manufacturer (typically every 3-5 years). Clean any dust accumulation from the enclosure and ventilation openings.
• שמירת תיעוד: Maintain a log of all inspections, tests, and maintenance performed.

7. פתרון תקלות

If the unit exhibits abnormal behavior, refer to the following table before contacting technical support.

8. מפרטים

9. אחריות ותמיכה טכנית

For warranty information, please refer to the documentation included with your purchase or visit the official POTTER website. For technical assistance, contact POTTER customer support. Ensure you have your model number (PSN-106B) and purchase details available when contacting support.

יַצרָן: קַדָר

Web: www.pottersignal.com (לְשֶׁעָבַרampהקישור, הקישור בפועל עשוי להשתנות)