מדריך למשתמש של מגבר ה-WiFi של JOOWIN

המוצר נגמרview

The JOOWIN WiFi Booster is designed to extend the coverage of your existing Wi-Fi network, eliminating Wi-Fi dead zones. It operates at 300Mbps, providing a stable and fast connection for your devices. This device is ideal for homes and offices where the existing Wi-Fi signal is weak or inconsistent.

תמונה: חזית view of the JOOWIN WiFi Booster, showing its compact design, two adjustable antennas, and indicator lights for power, LAN, and Wi-Fi signal strength. The JOOWIN logo is visible on the front panel.

תוכן החבילה

• 1 x JOOWIN WiFi Booster (Model: JW-WR302S V2-UKWS2)
• 1 x כבל Ethernet
• 1 x מדריך התקנה מהירה

הגדרה

Method 1: WPS Button Setup

1. לִתְקוֹעַ תֶקַע: Plug the JOOWIN WiFi Booster into an electrical outlet near your main router. Wait for the Power LED to light up.
2. WPS on Booster: Press the WPS button on the side or front of the JOOWIN WiFi Booster. The Wi-Fi LED should start blinking.
3. WPS on Router: תוך 2 דקות, לחצו על כפתור ה-WPS בנתב ה-Wi-Fi הראשי שלכם.
4. קֶשֶׁר: Wait for the Wi-Fi LED on the booster to turn solid, indicating a successful connection.
5. לְמַקֵם מְחָדָשׁ: Unplug the booster and move it to a location halfway between your router and the Wi-Fi dead zone. Ensure the Wi-Fi LED remains solid for optimal signal.

שיטה 2: Web הגדרת דפדפן

1. לִתְקוֹעַ תֶקַע: Plug the JOOWIN WiFi Booster into an electrical outlet.
2. Connect to Booster: On your computer or mobile device, connect to the Wi-Fi network named "JOOWIN_XXXX" (where XXXX are the last four digits of the MAC address, found on the device label). No password is required for the initial connection.
3. גִישָׁה Web מִמְשָׁק: פתח א web דפדפן (למשל, כרום, פיירפוקס) והקלד 192.168.10.1 לתוך שורת הכתובת. לחץ אנטר.
4. כְּנִיסָה לַמַעֲרֶכֶת: יופיע דף ההתחברות. שם המשתמש והסיסמה המוגדרים כברירת מחדל הם admin.
5. בחר מצב: Choose "Repeater Mode" or "AP Mode" based on your needs. For extending Wi-Fi, select Repeater Mode.
6. בחר רשת: The booster will scan for available Wi-Fi networks. Select your home Wi-Fi network from the list.
7. הזן סיסמה: Enter the Wi-Fi password for your home network. You can also set a new SSID for the extended network if desired.
8. החל הגדרות: Click "Apply" or "Save". The booster will restart.
9. לְמַקֵם מְחָדָשׁ: Once restarted, unplug the booster and move it to an optimal location. Connect your devices to the new extended Wi-Fi network.

הוראות הפעלה

נוריות חיווי

• LED מתח: כחול רציף מציין שהמכשיר מופעל.
• LED Wi-Fi:
  • Solid blue: Successfully connected to the main router and extending Wi-Fi.
  • Blinking blue: WPS pairing in progress or searching for a network.
  • Off: No Wi-Fi connection or device is not configured.
• LED LAN: Solid blue indicates a device is connected via the Ethernet port. Blinking indicates data transfer.

חיבור התקנים

After successful setup, your JOOWIN WiFi Booster will broadcast an extended Wi-Fi network. חפש this network on your devices (smartphones, tablets, laptops, smart TVs) and connect using the password you configured during setup (if you changed it, otherwise it's the same as your main router's Wi-Fi password).

שימוש ביציאת Ethernet

The booster includes an RJ45 Ethernet port. You can use this port to connect a wired device (e.g., desktop computer, gaming console, smart TV) to your network, providing a stable wired connection in the extended Wi-Fi area.

תַחזוּקָה

• ניקוי: השתמשו במטלית רכה ויבשה לניקוי החלק החיצוני של המכשיר. אין להשתמש בחומרי ניקוי נוזליים או בתרסיסים.
• מיקום: Ensure the booster is placed in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. Avoid placing it near large metal objects or appliances that may cause interference.
• עדכוני קושחה: בדקו מעת לעת את רשמי JOOWIN website for firmware updates. Updating the firmware can improve performance and security.
• איפוס: If the device is not functioning correctly, you may perform a factory reset. Locate the reset pinhole button (usually on the bottom or side) and press and hold it for 5-10 seconds using a paperclip until the LEDs flash. This will revert all settings to factory defaults.

פתרון בעיות

Q: The Wi-Fi LED is off or blinking rapidly after setup.

A: This indicates a poor or no connection to the main router. Try moving the booster closer to your main router. Ensure your main router's Wi-Fi is active and the password entered during setup is correct. If using WPS, ensure both buttons were pressed within the time limit.

ש: אני לא יכול לגשת ל web דף ניהול (192.168.10.1).

A: Ensure your device is connected to the booster's Wi-Fi network (e.g., "JOOWIN_XXXX") and not your main router's network. Try clearing your browser's cache or using a different browser. Temporarily disable any VPN or firewall software. If issues persist, perform a factory reset on the booster.

ש: אות ה-Wi-Fi המורחב חלש או לא יציב.

A: The booster might be too far from your main router or too close to a source of interference. Relocate the booster to a position halfway between your router and the desired coverage area. Avoid placing it near microwaves, cordless phones, or large metal objects. Adjust the antennas for better reception.

Q: My devices are not connecting to the extended network.

A: Double-check the Wi-Fi password you are entering. If you changed the SSID of the extended network, ensure you are connecting to the correct network name. Restart both the booster and your client devices.

מפרטים

אחריות ותמיכה

JOOWIN products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please visit the official JOOWIN website or contact their customer service. Contact information can usually be found on the product packaging or the official webאֲתַר.

Note: Software updates are not guaranteed indefinitely. Please check the manufacturer's website for the latest information regarding software support.