1. הקדמה
The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.
This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.
תכונות עיקריות:
- אפשרויות השקיה גמישות: Set water duration for each station between 1-240 minutes.
- Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
- תכונת עיכוב גשם: Pause watering for 24, 48, or 72 hours.
- Water Budgeting: Adjust run times based on seasonal changes.
- Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.
איור 1.1: חזית view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.
2. מידע בטיחות
Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.
- This controller is designed for שימוש פנימי בלבד. Do not install outdoors or in areas exposed to water.
- ודא שספק הכוח מנותק לפני ביצוע כל חיווט או תחזוקה.
- All electrical connections should be made in accordance with local electrical codes.
- אל תנסה לתקן את היחידה בעצמך. יש לפנות לכל טיפול וטיפול באנשי מקצוע מוסמכים.
3. התקנה והתקנה
3.1 הרכבת הבקר
Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.
- סמנו את מיקום ההרכבה הרצוי על הקיר.
- Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
- Hang the controller on the screws.
איור 3.1: דוגמהample of the controller mounted on a wall in an indoor setting.
3.2 חיווט הבקר
Before wiring, ensure the power adapter is unplugged from the electrical outlet.
- Common Wire (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
- Zone Wires (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
- Rain Sensor (Optional): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
- חיבור חשמל: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.
איור 3.2: מפורט view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.
4. הוראות הפעלה
The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.
איור 4.1: לוח בקרה מעלview, highlighting the LCD display, directional buttons, and function dial.
4.1 Setting Current Time and Date
- סובב את החוגה ל תאריך/שעון.
- השתמש ב- + ו - buttons to set the current year, then press לְהַכנִיס.
- Repeat for month, day, hour, and minute.
4.2 Programming Watering Schedules (Programs A & B)
The controller supports two independent programs (A and B) for different watering needs.
4.2.1 Setting Start Times
- סובב את החוגה ל שעת התחלה.
- The display will show '1'. Use + ו - to set the first start time, then press לְהַכנִיס.
- Continue setting up to 8 start times for the current program. To skip a start time, press לְהַכנִיס without setting a time.
- To switch between Program A and B, press the PROGRAM A-B לַחְצָן.
4.2.2 Setting Run Times (How Long)
- סובב את החוגה ל עַד מָתַי.
- The display will show 'STATION 1'. Use + ו - to set the watering duration (1-240 minutes) for Station 1, then press לְהַכנִיס.
- Repeat for each station (1-6).
- To switch between Program A and B, press the PROGRAM A-B לַחְצָן.
4.2.3 Setting Watering Days (How Often)
- סובב את החוגה ל באיזו תדירות.
- אתה יכול לבחור מתוך שלוש אפשרויות:
- Days of the Week: השתמש ב- חץ ימינה button to move to the desired day, then press לְהַכנִיס to select/deselect.
- מרווחים: לְהִשְׁתַמֵשׁ + ו - to set the interval (e.g., every 2 days).
- Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
- To switch between Program A and B, press the PROGRAM A-B לַחְצָן.
4.3 תכונת עיכוב גשם
The rain delay feature allows you to temporarily suspend your watering schedule for a set period.
- סובב את החוגה ל AUTO.
- הקש על עיכוב בגשם לַחְצָן.
- השתמש ב- + ו - buttons to select a delay of 24, 48, or 72 hours.
- The controller will automatically resume the schedule after the delay period. To cancel, press בָּרוּר.
4.4 Water Budgeting
The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.
- סובב את החוגה ל תַקצִיב.
- השתמש ב- + ו - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
- The change applies to all active programs and stations.
4.5 תפעול ידני
To manually water a specific station or all stations:
- סובב את החוגה ל AUTO.
- הקש על יָדָנִי לַחְצָן.
- השתמש ב- חץ ימינה or חץ שמאלה buttons to select the desired station or 'ALL' for all stations.
- לִלְחוֹץ לְהַכנִיס.
- לְהִשְׁתַמֵשׁ + ו - to set the manual run time.
- לִלְחוֹץ לְהַכנִיס כדי להתחיל השקיה ידנית.
- כדי להפסיק את ההשקיה הידנית, לחצו על בָּרוּר.
4.6 Turning Off the Controller
To stop all automatic watering, turn the dial to כבוי. The controller will retain its programming.
5. תחזוקה
- שמרו על ניקיון הבקר, ללא אבק ולכלוך. השתמשו במטלית רכה ויבשה לניקוי.
- Ensure the controller is not exposed to moisture or direct water spray.
- בדקו מעת לעת את חיבורי החיווט כדי לוודא שהם מאובטחים.
- During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.
6. פתרון תקלות
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Display is blank or no power. | No power to the outlet; faulty transformer; loose wiring. | Check outlet with another device. Ensure transformer is securely plugged into controller and outlet. Verify 24VAC wiring. |
| Sprinklers do not turn on. | Controller is OFF; rain delay active; wiring issue; valve problem. | Turn dial to AUTO. Check if rain delay is active. Verify common and zone wiring. Manually test valves at the valve box. |
| Only some zones water. | Loose zone wire; faulty valve for specific zone. | Check wiring for the non-working zones. Test the specific valve manually. |
| Controller waters at wrong times. | Incorrect time/date; incorrect program settings. | Verify current time and date. Review start times, run times, and watering days for all programs (A and B). |
| Watering duration is too short/long. | Incorrect run times; water budgeting active. | Check run times for each station. Verify water budgeting percentage. |
7. מפרטים
| תכונה | פְּרָט |
|---|---|
| מספר דגם | 28966 |
| מספר אזורים | 6 |
| קלט כוח | 120V AC 60Hz |
| פלט כוח | 24V AC |
| טמפרטורת הפעלה | 68 מעלות פרנהייט (20 מעלות צלזיוס) |
| מידות המוצר | 8 x 6.75 x 2 אינץ' (20.3 x 17.1 x 5.1 ס"מ) |
| משקל פריט | 1.3 פאונד (0.59 ק"ג) |
| סוג תצוגה | LCD |
| UPC | 046878289666 |
8. אחריות ותמיכה
For specific warranty information and detailed support, please refer to the official Orbit website or contact Orbit customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.
You can visit the official Orbit store for more information and product support: חנות אורביט באמזון