U.S. Solid Motorized Ball Valve Instruction Manual

1. הקדמה

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your U.S. Solid Motorized Ball Valve. Please read these instructions thoroughly before installation and retain this manual for future reference. This valve is designed for various applications requiring automated fluid control, featuring a durable stainless steel construction and a 2-wire auto return setup.

2. מידע בטיחות

• Always disconnect power before installing, servicing, or performing any maintenance on the valve.
• ודאו שכל החיבורים החשמליים תואמים לתקנים ולתקנות המקומיים.
• יש ללבוש ציוד מגן אישי (PPE) מתאים במהלך ההתקנה והתחזוקה.
• ודא את הכרךtage supply matches the valve's specifications (9-24V AC/DC).
• Do not exceed the maximum operating pressure of 10 bars (145 PSI).
• Avoid installing the valve in locations subject to extreme temperatures or corrosive environments beyond its IP65 rating.

3. המוצר נגמרview

3.1 תכונות עיקריות

• חוֹמֶר: Constructed from 304 stainless steel for durability and reliability.
• גודל יציאה: 3/4" NPT threading with a full port design to minimize pressure loss.
• כרך ידtage: Operates on 9-24V AC/DC.
• מִבצָע: Opens or closes in 3-5 seconds.
• תִיוּל: Simple 2-wire automatic return setup.
• בְּטִיחוּת: Limit switch minimizes power consumption once fully open or closed, reducing overheating risk.
• הֲגָנָה: IP65 rated for dust-tight and water jet protection.

3.2 רכיבים

The U.S. Solid Motorized Ball Valve consists of two primary components: the stainless steel ball valve body and the motorized actuator unit. The actuator houses the motor, gearing, and control electronics.

איור 1: חזית view of the U.S. Solid Motorized Ball Valve, showing the blue actuator and stainless steel valve body.

איור 2: צד view of the valve, illustrating the compact design of the actuator and the threaded valve connections.

איור 3: פנימי view of the actuator's circuit board, showing electronic components and wiring connections.

3.3 מפרטים

Figure 4: Product dimensions, showing approximate measurements of the valve and actuator assembly.

Figure 5: Explanation of the IP65 ingress protection rating, indicating dust-tightness and protection against water jets.

4. התקנה והתקנה

4.1 התקנה מכנית

1. Ensure the system is depressurized and drained before installation.
2. Apply PTFE (Teflon) tape to the male pipe threads to ensure a watertight seal. Wrap the tape clockwise around the threads, typically 3-5 layers.


Figure 6: Illustration of applying Teflon tape to male pipe threads for a secure, leak-free connection.

3. Screw the valve firmly into the piping system. Do not overtighten, as this can damage the threads or valve body.
4. Ensure the valve is installed in an accessible location for future maintenance.

4.2 Electrical Wiring (2-Wire Auto Return Setup)

This valve features a 2-wire auto return setup, meaning it will return to its fully open position if power is removed. It is a Normally Open (NO) valve, which means it is open when no power is applied.

• עבור כוח DC: Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of your 9-24V DC power supply. Applying power will close the valve. Removing power will cause the valve to automatically return to its open position.
• עבור מתח AC: Connect the red wire to one AC line and the black wire to the other AC line of your 9-24V AC power supply. Applying power will close the valve. Removing power will cause the valve to automatically return to its open position.

Figure 7: Wiring diagram for the 2-wire auto return setup, illustrating connections for both DC and AC power sources.

5. תפעול

The U.S. Solid Motorized Ball Valve is designed for simple on/off control. As a Normally Open (NO) valve, its default state without power is open.

• כדי לסגור את השסתום: Apply 9-24V AC/DC power to the red and black wires. The actuator will rotate, closing the ball valve. Once fully closed, an internal limit switch will cut power to the motor, preventing overheating.
• כדי לפתוח את השסתום: Remove the 9-24V AC/DC power from the red and black wires. The actuator will automatically return to its original position, opening the ball valve.

Figure 8: Diagram illustrating the 'Normally Open' operation, showing the valve's state with and without power.

6. תחזוקה

The U.S. Solid Motorized Ball Valve is designed for minimal maintenance. Regular inspection can help ensure long-term reliable operation.

• בדיקה תקופתית: Visually inspect the valve and actuator for any signs of damage, corrosion, or leaks. Check electrical connections for tightness and integrity.
• ניקוי: If necessary, clean the exterior of the valve and actuator with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no water enters the actuator housing.
• בדיקת מפעיל: Periodically cycle the valve (open and close) to ensure smooth operation. Listen for any unusual noises during actuation.

7. פתרון תקלות

If you encounter issues with your motorized ball valve, refer to the following troubleshooting guide:

8. אחריות ותמיכה

U.S. Solid offers a 1-year warranty or money-back promise on its products, ensuring customer satisfaction. For technical support, warranty claims, or further assistance, please visit the official U.S. Solid store or contact their customer service department.

U.S. Solid Store: https://www.amazon.com/stores/USSolid/page/29AB675D-2238-4826-BDE2-09EFEAB81AA6