maXpeedingrods LS400 XF10 / Celsior

maXpeedingrods Coilovers for Lexus LS400 XF10 / Toyota Celsior (1990-1994) Instruction Manual

Model: LS400 XF10 / Celsior

1. הקדמה

This manual provides essential information for the installation, adjustment, and maintenance of your maXpeedingrods Height Adjustable Coilovers Suspension Kit. These coilovers are designed for specific vehicle models to enhance handling and allow for ride height customization.

תְאִימוּת:

  • Lexus LS400 XF10 (1990, 1991, 1992, 1993, 1994)
  • Toyota Celsior (1990, 1991, 1992, 1993, 1994)

Please read this manual thoroughly before attempting any installation or adjustment.

Complete maXpeedingrods Coilovers Kit for Lexus LS400 / Toyota Celsior

תמונה 1.1: נגמרview of the maXpeedingrods Coilovers kit, including front and rear units.

2. מידע בטיחות

אַזהָרָה: Improper installation or adjustment of suspension components can lead to serious injury or vehicle damage. Professional installation by a qualified technician is highly recommended.

  • יש ללבוש תמיד ציוד מגן אישי (PPE) מתאים, כולל משקפי בטיחות וכפפות.
  • ודא שהרכב נתמך היטב על גבי מגבה או מעלון לפני תחילת כל עבודה. לעולם אל תסמוך אך ורק על מגבה.
  • השתמשו רק בכלים המתאימים למשימה.
  • Do not modify any components of the coilover kit.
  • After installation, perform a wheel alignment to ensure proper vehicle handling and tire wear.

3. המוצר נגמרview ורכיבים

The maXpeedingrods coilover kit includes the following main components:

  • מכלולי קוֹילאובר קדמיים (2)
  • מכלולי קוֹילאובר אחוריים (2)
  • C Spanners for Height Adjustment (2)

תכונות עיקריות:

  • High Tensile Springs: Front spring rate: 9 kg/mm (504 lbs/in). Rear spring rate: 10 kg/mm (556 lbs/in). These springs are tested for durability, showing less than 0.04% distortion after 600,000 continuous tests.
  • גובה מתכוונן: Allows for 1-3 inches of lowering, providing a more aggressive stance. Note: This kit does not maintain original ride height.
  • Twin-tube Structure: Offers a longer stroke and higher height adjustment range compared to mono-tube designs, contributing to a more comfortable ride by reducing joint pressure and minimizing friction.
  • חומר עמיד: Constructed from 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength, and durability.
Front Rod Diameter of maXpeedingrods Coilover

Image 3.1: Detail of the front rod, featuring a 22mm diameter for extended durability.

Perches and Locking Rings of maXpeedingrods Coilover

Image 3.2: CNC Billet Aluminum Perches and Locking Rings, essential for height adjustment.

Rubber Top Mount of maXpeedingrods Coilover

Image 3.3: Lightweight rubber top mount designed to reduce noise.

Rubber Top Mount and Radial Bearing Assembly

Image 3.4: Illustration of the rubber top mount and radial bearing, contributing to smooth operation.

High Rigidity 55CrSi Steel Cold-Bent Coil Springs

Image 3.5: High rigidity 55CrSi steel cold-bent coil springs, engineered for performance and durability.

4. התקנה והתקנה

Installation of coilovers requires mechanical expertise and specialized tools. It is strongly recommended that installation be performed by a certified automotive technician.

General Installation Steps (Consult a vehicle-specific service manual for detailed instructions):

  1. Safely lift and support the vehicle. Remove wheels.
  2. Remove existing suspension components (struts, springs, etc.).
  3. Install the new maXpeedingrods coilover assemblies. Ensure all bolts are torqued to manufacturer specifications.
  4. Adjust the ride height as desired (refer to Section 5).
  5. Reinstall wheels and lower the vehicle.
  6. Perform a professional wheel alignment immediately after installation to prevent premature tire wear and ensure safe handling.

חָשׁוּב: The coilovers are designed for a lowered stance and will not maintain the original ride height of your vehicle.

5. הפעלה וכיוונון

התאמת גובה הנסיעה:

The coilovers allow for a ride height adjustment range of 1 to 3 inches lower than stock. This adjustment is performed using the provided C spanners to rotate the locking rings on the coilover body.

  1. Safely lift and support the vehicle to relieve pressure from the suspension.
  2. Loosen the upper locking ring using a C spanner.
  3. Rotate the lower spring perch to achieve the desired ride height. Turning clockwise will lower the vehicle; counter-clockwise will raise it.
  4. Once the desired height is set, tighten the upper locking ring against the lower spring perch to secure the adjustment.
  5. Repeat for all four coilovers, ensuring consistent height settings across the axle (front left/right, rear left/right).
  6. Lower the vehicle and bounce the suspension to settle it. Re-check ride height and adjust as necessary.

פֶּתֶק: ה-דamping force of these coilovers is preset and not user-adjustable.

Height Adjustment Diagram for Coilovers

Image 5.1: Diagram illustrating independent ride height and spring tension settings.

6. תחזוקה

Regular inspection and maintenance will ensure the longevity and performance of your coilovers.

  • בדיקה רגילה: Periodically inspect all coilover components for signs of wear, damage, or leaks. Check for loose bolts or nuts.
  • ניקוי: Keep the coilover bodies and springs clean from dirt, salt, and debris, especially after driving in harsh conditions. Use mild soap and water.
  • בדיקות מומנט: After the initial installation and after approximately 500 miles, re-check the torque on all mounting bolts and nuts. Refer to your vehicle's service manual for specific torque values.
  • מַעֲרָך: If you notice uneven tire wear or changes in handling, have a professional alignment performed.

7. פתרון תקלות

If you experience any issues with your coilovers, consider the following common troubleshooting steps:

סִימפּטוֹםסיבה אפשריתפִּתָרוֹן
רעשים חריגים (נקישה, חריקה)Loose mounting bolts, worn bushings, improper installation.Inspect all mounting points and torque to specifications. Check for damaged bushings. Re-install if necessary.
גובה נסיעה לא אחידIncorrect height adjustment, uneven spring preload.Re-adjust ride height on all four corners, ensuring consistency.
Poor handling or steering responseIncorrect wheel alignment, improper tire pressure.Have a professional wheel alignment performed. Check tire pressures.
Leaking shock absorberאטם או רכיב פנימי פגומים.Contact maXpeedingrods customer support for assistance or warranty claim.

If problems persist after attempting these steps, please contact maXpeedingrods customer support.

8. מפרטים

תכונהפְּרָט
תְאִימוּתLexus LS400 XF10 (1990-1994), Toyota Celsior (1990-1994)
קצב קפיץ קדמי9 ק"ג/מ"מ (504 ליברות/אינץ')
קצב קפיץ אחורי10 ק"ג/מ"מ (556 ליברות/אינץ')
טווח כוונון גובה1-3 inches lowering from stock
Shock Absorber TypeTwin-tube, Preset Damping
חוֹמֶר6061 Aluminum Alloy with T6
גימור חיצוניאֲלוּמִינְיוּם
מיקום חלק אוטומטיFront and Rear (Full Kit)
Dimension Details for Front and Rear Coilovers

Image 8.1: Detailed dimensions for front and rear coilover units, including spring rates and lengths.

9. אחריות ותמיכה

מידע על אחריות:

For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official maXpeedingrods website. Generally, products are covered by a manufacturer's warranty against defects in materials and workmanship.

תמיכת לקוחות:

If you have any questions, require technical assistance, or need to initiate a return or warranty claim, please contact maXpeedingrods customer support. You may find contact information on the maXpeedingrods official webבאתר או דרך נקודת הרכישה שלך.

החזרות: This product typically includes a 30-day easy return policy from the seller, maXpeedingrods-us.

לתמיכה ישירה, אנא בקרו באתר חנות maXpeedingrods באמזון או ליצור קשר עם מחלקת שירות הלקוחות שלהם.

© 2024 maXpeedingrods. כל הזכויות שמורות.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.