maXpeedingrods TT82 Timing Chain Riveting Tool Kit Instruction Manual

1. המוצר נגמרview

This maXpeedingrods TT82 Timing Chain Riveting Tool Kit is designed for the precise separation, easy pulling, and accurate riveting of timing chains. It is suitable for both simplex timing chains with 3mm and 4mm pins, and duplex timing chains. This kit facilitates efficient maintenance and replacement of timing chains in various compatible engines.

2. מידע בטיחות

Always observe the following safety precautions when using this tool kit:

• יש ללבוש ציוד מגן אישי (PPE) מתאים, כולל משקפי בטיחות וכפפות.
• Ensure the vehicle is stable and properly supported before beginning any work.
• יש לקרוא ולהבין את כל ההוראות לפני הפעלת הכלים.
• Use the correct tool for the specific task. Do not force tools.
• שמור על אזור העבודה נקי ומואר היטב.
• Store tools properly in their case when not in use to prevent damage and loss.
• If unsure about any procedure, consult a qualified mechanic or service manual.

3. תכולת החבילה

The maXpeedingrods TT82 Timing Chain Riveting Tool Kit includes the following components, neatly organized in a durable plastic case:

4. Compatibility and Applications

This tool kit is designed for use with a wide range of Mercedes-Benz, BMW, SAAB, Chrysler, and Jeep engines. It is suitable for almost all gasoline and diesel engines equipped with a timing chain.

Specific applications include:

• מרצדס-בנץ: Engines 615, 616, 617, M102, M103, 116, 272, and others.
• Chrysler and Jeep: Diesel CDI engines 1.7, 2.1, 2.2, 2.7, 3.0, 3.2, 3.9, and 4.0 liters. CRD engines 2.2, 2.7, and 3.0 liters.

The kit is compatible with the following engine codes:

• 1.4: 166.94
• 1.5: 266.920
• 1.6: 166.960
• 1.7: 266.940
• 1.7D CDi: 668.940, 668.941, 668.942
• 1.9: 166.990
• 2.0: 266.960, 266.980
• 2.1D CDi: 646.811, 646.812, 646.820, 646.821, 626.951, 626.961, 626.962, 626.963, 626.966
• 2.2 CDi / CRD: 611.960, 611.961, 611.962
• 2.4: 112.910, 112.911
• 2.6: 112.912, 112.913, 112.914, 112.915, 112.916
• 2.7D CDi / CRD: 612.961, 612.962, 612.965, 612.967, 647.961
• 2.8: 112.920, 112.921, 112.922, 112.923
• 3.0D CDi/ CRD: 642.830, 642.832, 642.834, 642.836, 642.850, 642.852, 642.853, 642.854, 642.856, 642.858, 642.862, 642.868, 642.886, 642.910, 642.920, 642.921, 642.922, 642.930, 642.642
• 3.2D CDi: 613.960, 613.961, 648.960, 648.961
• 3.2: 112.940, 112.942, 112.943, 112.944, 112.946, 112.947, 112.951, 112.953, 112.955
• 2.9D CDi: 628 960, 628 961
• 4.0D CDi: 628.962, 629.910, 629.911
• 4.3: 113.940, 113.941, 113.942, 113.943, 113.948
• 5.0: 113.960, 113.961, 113.963, 113.964, 113.965, 113.966, 113.967, 113.968, 113.969, 113.971

5. OEM Cross-Reference

This tool kit replaces or is equivalent to the following OEM part numbers:

• 602589003900
• 602589023300
• 103589016300
• 602589056300
• 602589056301
• 602589046300
• 602589046301
• 112589096300
• 602589024000
• 602589026300

6. תכונות מוצר

The maXpeedingrods TT82 kit is engineered for professional use, featuring precision machining and high-quality construction:

• עיצוב מדויק: Allows for clean separation, easy pulling, and precise riveting of timing chains.
• צדדיות: Compatible with both simplex and duplex timing chains, utilizing 3mm and 4mm pins.
• בנייה עמידה: Made from robust materials for industrial professional use, ensuring smooth threading and high quality.
• ערכה מקיפה: Includes specialized tools for cutting and riveting, along with various adapters and thrust pieces for different chain types.

7. התקנה והכנה

Before using the timing chain tool kit, ensure the engine is at Top Dead Center (TDC) on the compression stroke for cylinder 1, and that all necessary safety precautions are in place.

1. Identify the timing chain to be serviced.
2. Select the appropriate chain separator tool (Item A) and riveting tool (Item B) based on the chain type (simplex or duplex) and pin size (3mm or 4mm).
3. Gather the necessary pins, thrust pieces, and guide rails (Items C-O) for the specific operation.
4. ודא שכל הרכיבים נקיים וללא פסולת.

8. הוראות הפעלה

8.1. Timing Chain Separation

To separate an existing timing chain:

1. Position the chain separator tool (Item A) over the chain link to be separated.
2. Insert the appropriate link removal pin (Item D) into the tool, aligning it with the chain pin.
3. Slowly turn the external hexagonal drive (13mm) of the separator tool to push out the chain pin. Apply steady pressure.
4. Once the pin is removed, the chain link can be separated.

8.2. Timing Chain Riveting

To rivet a new or repaired timing chain:

1. Assemble the new chain link or master link onto the chain ends.
2. Select the correct riveting tool (Item B) and the appropriate riveting thrust piece (Item J or K) and guide rail (Item L, M, or N) for your chain type and pin size.
3. Place the riveting tool over the new chain link, ensuring the thrust piece and guide rail are correctly positioned to support the chain and align with the pins.
4. Slowly turn the external hexagonal drive (13mm) of the riveting tool to press and rivet the chain pins. Ensure the riveting process creates a secure and flush connection.
5. Visually inspect the riveted link to confirm proper installation and security. The riveted pin heads should be slightly flared to prevent detachment.

9. אחזקה ואחסון

Proper maintenance and storage will extend the life of your tool kit:

• After each use, clean all tool components to remove oil, grease, and debris.
• Apply a light coat of rust-preventative oil to metal parts before storage.
• Store the tools in their original plastic case (Image 9.1) in a dry, clean environment to protect them from moisture and damage.
• Regularly inspect tools for wear or damage. Replace any worn or damaged components immediately.

10. פתרון תקלות

If you encounter issues while using the tool kit, consider the following:

• Tool not separating chain: Ensure the correct pin size is used and the tool is properly aligned. Check for excessive wear on the removal pin.
• Riveting not secure: Verify that the correct thrust piece and guide rail are used for the chain type. Ensure sufficient pressure is applied during riveting. Inspect the new chain link for defects.
• Difficulty turning tool: Ensure threads are clean and lubricated. Do not overtighten or force the tool.
• רכיבים פגומים: Discontinue use immediately and replace any damaged parts.

11. מפרטים

12. אחריות ותמיכה

For warranty information or technical support, please refer to the maXpeedingrods official webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם. שמרו את קבלת הרכישה כהוכחת קנייה.