PQWT S300 Automatic Mapping Geophysical Water Detector Instruction Manual

1. המוצר נגמרview

The PQWT S300 is an advanced automatic mapping geophysical instrument designed for underground water detection, aquifer surveying, and well location. Utilizing resistivity sensor technology, it provides efficient and accurate geological prospecting. This manual provides detailed instructions for the proper setup, operation, and maintenance of your PQWT S300 device.

Image: The main unit of the PQWT S300 Water Detector, showcasing its display and robust design.

2. תכולת המוצר

ודא שכל הרכיבים המפורטים להלן כלולים בחבילה שלך:

Image: All components included with the PQWT S300 Water Detector, neatly arranged in its protective case.

• מכונה מארחת (יחידה ראשית)
• Special Cable (10M Measuring Cable)
• Alloy Electrode Bar
• Copper Electrode
• מַטעֵן
• קו נתונים USB
• מתאם אוניברסלי
• רְצוּעָה
• מארז אלומיניום

3. מפרטים

The following table details the technical specifications of the PQWT S300 Water Detector:

Image: A detailed table showing the specifications of the PQWT S150, S300, and S500 models, highlighting the S300's capabilities.

4. התקנה

Proper setup is crucial for accurate measurements. Follow these steps to prepare your PQWT S300 for operation:

1. הכנת האתר: Select a tape of 50 meters and pull it open along a straight line at the location to be explored. Mark the starting point. For geophysical prospecting, the line should be perpendicular to the tectonic line.
2. חיבור מכשיר: Insert the electrode cable into the main unit. Long press the power button to enter the start interface.
3. Measurement Method Selection: From the main menu, select "Profile Survey" to enter the measurement interface.
4. Depth and Line Configuration: Click "Options" and choose the desired depth (e.g., 300M) and line number (e.g., 001) according to your measurement requirements.
5. מיקום האלקטרודה: Insert one electrode near the host into the tape position of 0 meters. Insert the other electrode into the tape position of 10 meters.
6. Line Test: Cross and put the two connected electrodes together. Click "Line Test" on the instrument. A green test light indicates the line is normal.

Image: A visual guide illustrating the seven steps for using the S Series Water Locating Instrument, from setup to drilling.

5. הוראות הפעלה

Once the setup is complete, proceed with the measurement process:

1. First Point Measurement: Click the "Record" button for the first measurement point. The instrument will display data acquisition. Once completed, it will notify "Record Completed" with a voice prompt. Note that each measurement point is in the middle of the two electrodes.
2. Subsequent Point Measurement: Move both electrodes forward simultaneously by a distance of one meter. Click "Record" again for the next point. Repeat this process for all desired measurement points along the line.
3. Curve Chart Analysis: When a line measurement is finished, the screen automatically displays the curve chart. A smooth curve indicates uniform strata, while curves shaped like "V", "W", "L", or "A" often reveal geological anomalies such as faults, fractures, or aquifers.
4. מִקצוֹעָןfile Map Generation: Click "Profile" to automatically generate profile maps. You can click "+" or "-" to adjust the map as needed. Colors from blue to red indicate increasing data values, representing geological or lithological characteristics from soft to hard.
5. Multi-Line Measurement: If you need to measure the next line, adjust the line number (e.g., to 002) in the "Options" menu and repeat the measurement steps.

6. הערות בטיחות חשובות

Adhere to the following safety guidelines during operation:

• The electrode rod must not be shaken, and the copper electrode must not touch metal objects while recording.
• It is suggested that one line should be measured with more than 15 points for optimal accuracy.
• Instruments are strictly prohibited for use during thunderstorms.
• Wiring needs to avoid areas with high voltage lines and significant ground drops.

7. תחזוקה

To ensure the longevity and optimal performance of your PQWT S300, follow these maintenance tips:

• שמרו על ניקיון המכשיר וללא אבק ולחות.
• Store the instrument in its aluminum case when not in use to protect it from physical damage.
• Ensure batteries are charged regularly and stored in a cool, dry place.
• Inspect cables and electrodes for any signs of wear or damage before each use. Replace damaged components immediately.

8. פתרון תקלות

If you encounter issues with your PQWT S300, refer to the following common troubleshooting steps:

• אין כוח: Ensure the batteries are fully charged and correctly inserted. Check the power switch.
• Line Test Failure: Verify all cable connections are secure. Inspect the cables and electrodes for any breaks or damage. Ensure electrodes are properly inserted into the ground.
• קריאות לא מדויקות: Check for any nearby high voltage lines or large ground drops that might interfere with measurements. Ensure proper electrode spacing and alignment.
• בעיות תוכנה: If the device is unresponsive, try restarting it by long-pressing the power button. If issues persist, consult the support hotline.

9. אחריות ותמיכה

The PQWT S300 host is backed by a lifetime maintenance service. For any technical assistance, inquiries, or to send data for professional analysis, please contact our specialists:

• Consulting Hotline: 0086-731-82237112
• נייד/וואטסאפ: 008613548970999 (Mr. Frank)
• Users can send pictures of their geophysical water detecting data through mobile phones to our online platform for communication with our hydrogeology specialists.