ErGear Dual Monitor Stand EGCM3-E Instruction Manual

מָבוֹא

This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand, model EGCM3-E. Please read this manual thoroughly before installation and retain it for future reference. This monitor stand is designed to support two monitors ranging from 13 to 32 inches, with a maximum weight capacity of 8 kg (17.6 lbs) per arm.

מידע בטיחות

• ודא שכל הרכיבים קיימים ולא ניזוקו לפני ההרכבה. אין להשתמש אם חלקים חסרים או פגומים.
• Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) per arm. Overloading may result in instability and potential injury.
• This stand is compatible with VESA mounting patterns of 75x75mm and 100x100mm. Verify your monitor's VESA pattern before installation.
• Always use two people for lifting and mounting monitors to prevent injury.
• ודא שהמעמד ממוקם על משטח יציב ומאוזן.
• הרחק ילדים וחיות מחמד במהלך ההרכבה.

תוכן החבילה

Please check to ensure all parts are included in your package:

• פלטת בסיס
• קוטב תמיכה
• זרועות צג (2)
• לוחות VESA (2)
• קליפים לניהול כבלים
• ערכת חומרה (ברגים, דיסקיות, מפתחות אלן)

הוראות התקנה

Step 1: Assemble the Base and Pole

Attach the support pole to the base plate using the provided screws. Ensure the connection is secure and stable.

The sturdy base plate provides stability for the dual monitor setup. Dimensions are approximately 41cm by 26cm.

Step 2: Attach Monitor Arms to the Pole

Slide the monitor arms onto the support pole. Adjust them to your desired height and tighten the securing mechanism. Note that both arms adjust vertically together.

שלב 3: חבר לוחות VESA לצגים

Secure the VESA plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the VESA pattern (75x75mm or 100x100mm) matches.

Each arm is designed to hold monitors up to 8 kg (17.6 lbs) and supports VESA 75x75mm or 100x100mm mounting patterns for 13-32 inch screens.

Step 4: Mount Monitors to Arms

Carefully slide the monitors (with VESA plates attached) onto the monitor arms. Secure them in place with the locking screws or clips provided.

הפעלה והתאמות

The ErGear Dual Monitor Stand offers a range of adjustments for optimal viewing comfort and ergonomic positioning.

התאמת גובה

To adjust the height of both monitors, loosen the collar on the support pole, slide the arms to the desired height, and then re-tighten the collar. The maximum height extension is approximately 42cm.

Monitors can be raised up to 42cm from the desk surface to achieve an ergonomic viewגובה.

הטיה, סיבוב וסיבוב

Each monitor arm allows for flexible positioning:

• הטיה: Adjust the monitor screen ±45° (up or down) to reduce glare and optimize viewזוויות.
• לְהִסְתוֹבֵב: Pivot the monitor 180° (left or right) to share your screen or change viewכיוון.
• רוֹטַציָה: סובב את הצג ב-360 מעלות כדי לעבור בין כיוון תצוגה לרוחב ולאורך.

The stand allows for versatile adjustments including tilt, swivel, and full 360-degree rotation for each monitor.

Easily switch monitors between landscape and portrait modes for different tasks.

ניהול כבלים

The stand features integrated cable management clips to keep your workspace tidy and organized. Route your monitor and power cables along the arms and down the support pole using the provided clips.

Utilize the integrated cable management system to maintain a clean and organized desk environment.

תַחזוּקָה

• בדקו באופן קבוע את כל הברגים והחיבורים כדי לוודא שהם נשארים מהודקים ומאובטחים.
• נקה את המעמד עם רך, דamp מטלית. הימנעו מחומרי ניקוי שוחקים או ממסים.
• Do not lubricate any moving parts unless specifically instructed by the manufacturer.

פתרון בעיות

המסכים אינם מאוזנים:

Check if the VESA plates are securely attached to both monitors and the arms. Ensure the arms are at the same height on the pole. Minor adjustments can often be made by slightly loosening and re-tightening the VESA plate screws.

המעמד מרגיש לא יציב:

Verify that the base is on a flat, stable surface. Ensure all screws, especially those connecting the pole to the base, are fully tightened. Confirm that the combined weight of your monitors does not exceed the stand's capacity.

קושי בכוונון ההטיה/סיבוב:

Some joints may have tension adjustment screws. Refer to the assembly diagrams for specific locations and use the provided Allen key to loosen or tighten as needed.

מפרטים

אחריות ותמיכה

For warranty information or technical support, please refer to the documentation included with your purchase or contact ErGear customer service directly. Contact details can typically be found on the manufacturer's official webבאתר או על אריזת המוצר.