Thincol Digital Temperature Controller (12V Model) User Manual

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your Thincol Digital Temperature Controller (12V Model). Please read this manual thoroughly before using the device to ensure proper function and safety.

2. מידע בטיחות

הוראות בטיחות חשובות:

• ודא את אספקת החשמל כרךtage matches the device's requirements (DC 12V for this model).
• אין לחשוף את המכשיר למים או ללחות מוגזמת.
• Avoid installing the device in areas with extreme temperatures or direct sunlight.
• נתק את החשמל לפני ביצוע כל חיווט או תחזוקה.
• All wiring should be performed by a qualified professional if you are unsure.
• הרחק מהישג ידם של ילדים.

3. תכולת החבילה

החבילה צריכה להכיל את הפריטים הבאים:

• 1 x Thincol Digital Thermostat Temperature Alarm Controller Sensor (12V Model)

4. המוצר נגמרview

Familiarize yourself with the components of your temperature controller.

איור 1: חזית view of the Thincol Digital Temperature Controller, showing the dual LED display (PV and SV), 'SET' button, up/down arrows, 'OUT' indicator, and 'Restart' button. The temperature sensor probe is connected via a black wire.

איור 2: אחורי view of the Thincol Digital Temperature Controller, highlighting the blue screw terminals for power input and output connections.

איור 3: צד view of the Thincol Digital Temperature Controller, showing its compact form factor suitable for panel mounting.

מרכיבי מפתח:

• תצוגת PV: Process Value (Current Temperature)
• תצוגת SV: Set Value (Target Temperature)
• לחצן SET: Enters/Exits parameter setting mode.
• לחצנים למעלה/למטה: Adjust values in setting mode.
• מחוון OUT: Illuminates when the output relay is active.
• לחצן הפעלה מחדש: מאפס את המכשיר.
• מסופי חיווט: For power input and load output connections.
• חיישן טמפרטורה: Measures the ambient temperature.

5. מפרטים

6. התקנה וחיווט

Before wiring, ensure the power supply is disconnected. Incorrect wiring can damage the device or connected equipment. If you are unsure, consult a qualified electrician.

חיבורי חיווט:

1. קלט כוח: Connect the DC 12V power supply to the designated input terminals on the back of the controller. Observe polarity (+/-) carefully.
2. פלט עומס: Connect the device you wish to control (e.g., heating element, cooling fan) to the output terminals. The controller acts as a switch for this load. Ensure the load's power requirements do not exceed the controller's maximum output (120W for the 12V model).
3. חיישן טמפרטורה: Insert the temperature sensor probe into the environment where temperature measurement is required. Ensure it is securely placed and not directly exposed to heat sources or drafts that could skew readings.

Warning: Always disconnect power before making or changing any wiring connections.

7. הוראות הפעלה

Setting the Target Temperature (SV):

1. הקש על מַעֲרֶכֶת button once. The SV (Set Value) display will begin to flash.
2. השתמש ב- Up ו לְמַטָה arrow buttons to adjust the target temperature to your desired value.
3. הקש על מַעֲרֶכֶת button again to confirm the setting and exit the setting mode.

Cooling/Heating Mode Selection:

The controller can operate in either cooling or heating mode. This is typically configured via an advanced parameter (often labeled P0 or P1). Please consult the full product manual for specific instructions on how to access and set the cooling or heating mode.

Advanced Parameter Settings (P3, P4, P5):

To access advanced parameters, typically a long press of the מַעֲרֶכֶת button is required. Use the Up/Down buttons to navigate between parameters (e.g., P0, P1, P2, P3, P4, P5) and then press מַעֲרֶכֶת again to enter the parameter's value adjustment mode.

• P3 Setting (Delay Stop/Compressor Protection): If P3 is set to '1', the thermostat will stop running for 1 minute. This function is often used for compressor delay protection in cooling systems. A long press of the מַעֲרֶכֶת button is required to trigger this function again after it has completed its cycle.
• P4 Setting (Delayed Start): If P4 is set to '1', the thermostat will begin operation after a 1-minute delay. During this delay, the digital display will not illuminate until normal operation commences. A long press of the מַעֲרֶכֶת button is required to trigger this function again.
• P5 Setting (Parameter Lock): By default, P5 is set to 'OFF'. Once the desired temperature and other parameters are configured, setting P5 to 'ON' will lock the data, preventing accidental changes. To modify settings again, P5 must be set back to 'OFF'.

כיול טמפרטורה:

The device supports temperature calibration to fine-tune accuracy. This is usually an advanced parameter (e.g., P7 or P8). Refer to the full product manual for specific instructions on how to access and adjust the temperature calibration offset.

High/Low Limit Temperature Setting:

The controller allows setting upper and lower temperature limits to prevent extreme conditions. These are typically accessible through advanced parameters. Consult the full product manual for details on setting these limits.

8. תחזוקה

• ניקוי: נגבו את המכשיר במטלית רכה ויבשה. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• טיפול בחיישנים: Ensure the temperature sensor is clean and free from debris for accurate readings.
• בדיקת חיבור: בדקו מעת לעת את כל חיבורי החיווט כדי לוודא שהם מאובטחים.
• אִחסוּן: If storing the device for an extended period, disconnect it from power and store it in a dry, cool place.

9. פתרון תקלות

10. אחריות ותמיכה

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Thincol customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: Thincol