Max Sensor MXSA001

MAX MXSA001 315MHz TPMS Tire Pressure Sensors for Toyota Instruction Manual

Model: MXSA001 | Brand: Max Sensor

1. הקדמה

This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.

2. מידע בטיחות

  • התקנה מקצועית מומלצת: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
  • Correct Torque: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
  • הרכבת צמיגים: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
  • תְאִימוּת: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
  • חיי סוללה: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.

3. תכולת החבילה

כל חבילה מכילה:

  • 4 x MAX MXSA001 315MHz TPMS Sensors
  • 4 x Silver Aluminum Valve Stems (pre-attached to sensors)
Four MAX MXSA001 TPMS sensors with silver aluminum valve stems, arranged on a white background.

איור 3.1: מעלview of four MAX MXSA001 TPMS sensors.

4. התקנה והתקנה

Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.

4.1 בדיקת טרום התקנה

  • Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
  • Inspect each sensor for any visible damage before installation.

4.2 הרכבת חיישן

  1. הסר את הצמיג מהגלגל.
  2. Carefully remove the old TPMS sensor and valve stem.
  3. Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
  4. Secure the valve stem nut from the outside, tightening it to 4 ננומטר (35 אינץ' פאונד). אין להדק יתר על המידה.
  5. Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
  6. Mount the tire back onto the wheel, taking care not to damage the sensor.
  7. נפחו את הצמיג ללחץ האוויר המומלץ על ידי היצרן.
תקריב view of a single MAX MXSA001 TPMS sensor, showing the black sensor body, silver valve stem, and printed specifications like 'Max.9Bar/130Psi' and '4Nm'.

Figure 4.2.1: Close-up of a single MXSA001 sensor.

צַד view of a MAX MXSA001 TPMS sensor, highlighting the angle of the valve stem attachment to the sensor body.

איור 4.2.2: צד view of the sensor and valve stem.

4.3 נוהל למידה מחדש של מערכת TPMS

After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.