מדריך למשתמש של הרגולטור-בקר-תצוגה NA6888

1. הקדמה

The AstralPool NA6888 is a sophisticated regulator, controller, and display unit designed for integration with AstralPool heat pump systems. This device provides essential control and monitoring functionalities for your heat pump, ensuring efficient and reliable operation. Please note that this unit is not compatible with remote control systems.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your NA6888 unit. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. מידע בטיחות

יש להקפיד תמיד על הנחיות הבטיחות הבאות כדי למנוע פגיעה או נזק ליחידה:

• בטיחות חשמל: This unit operates on 220V AC. All electrical connections must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance work.
• הגנת הסביבה: The NA6888 unit has an IP65 protection rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, avoid direct high-pressure water jets or submersion.
• שימוש נכון: Use the device only for its intended purpose as a regulator, controller, and display for AstralPool heat pumps. Do not attempt to modify the unit.
• טיפול: Handle the unit with care to avoid physical damage.

3. תכונות מוצר

The NA6888 unit offers a range of features for comprehensive heat pump management:

• בקרה משולבת: Combines regulation, control, and display functions in a single compact unit.
• כניסות חיישנים: Supports dedicated inputs for a Temperature Sensor (T1) and a Defrost Sensor (T2).
• כניסות אזעקה: Features three external alarm signal inputs (S1, S2, S3) for enhanced system monitoring.
• בקרת פלט: Provides control outputs for key heat pump components including Water Pump, Fan, Valve, and Compressor.
• עיצוב עמיד: IP65 rated enclosure for protection against dust and water splashes.

איור 3.1: חזית view of the NA6888 controller display, showing the digital readout and control buttons.

4. תכולת החבילה

עם פתיחת האריזה, יש לוודא שכל הרכיבים הבאים נמצאים:

• 1x NA6888 Regulator-Controller-Display Unit
• 1x Wiring Harness/Cables
• 2x תפסי הרכבה

Figure 4.1: Included wiring harness.

Figure 4.2: Mounting clips.

5. התקנה והתקנה

Installation of the NA6888 unit requires careful attention to electrical connections. It is strongly recommended that installation be performed by a qualified and licensed professional.

5.1. הרכבת היחידה

1. Identify a suitable location for the controller, ensuring it is protected from direct sunlight, extreme temperatures, and excessive vibration.
2. Cut an appropriate opening in the mounting panel or enclosure, matching the dimensions of the NA6888 unit.
3. Insert the NA6888 unit into the opening from the front.
4. Secure the unit in place using the provided mounting clips on the sides, ensuring a snug fit.

5.2. חיבורי חיווט

Refer to the wiring diagram printed on the back of the NA6888 unit for precise connection points. Ensure all connections are secure and correctly polarized.

Figure 5.1: NA6888 Wiring Diagram.

תיאורי מסוף:

After all connections are made, double-check the wiring against the diagram to prevent damage to the unit or connected components.

6. הוראות הפעלה

Once installed and powered on, the NA6888 display will illuminate, showing current system parameters. The unit features several buttons for navigation and setting adjustments:

• למעלה (^) לחצן: משמש להגדלת ערכים או לניווט מעלה בין אפשרויות התפריט.
• מטה (v) לחצן: משמש להקטנת ערכים או לניווט מטה בין אפשרויות התפריט.
• לחצן SET: Used to enter a menu, confirm a selection, or save a setting.
• כפתור M (תפריט): Used to access the main menu or exit a sub-menu.

6.1. פעולה בסיסית

1. הפעלה: Ensure the unit is correctly wired and power is supplied. The display will show the current temperature or system status.
2. Viewפרמטרים: Use the Up/Down buttons to cycle through various displayed parameters (e.g., temperature readings from T1/T2, set points, operational status).
3. התאמת הגדרות:
   1. הקש על מַעֲרֶכֶת button to enter the setting mode for the currently displayed parameter, or press the M לחצן כדי לגשת לתפריט הראשי.
   2. Use the Up/Down buttons to adjust the value.
   3. לִלְחוֹץ מַעֲרֶכֶת again to confirm and save the new value.
   4. לִלְחוֹץ M to exit the menu or setting mode.

For detailed programming and advanced settings, refer to the specific programming guide for your AstralPool heat pump model, as the NA6888 acts as the interface for these settings.

7. תחזוקה

The NA6888 unit is designed for low maintenance. Regular checks can help ensure its longevity and proper function:

• ניקוי: נגבו את הצג וה-c מעת לעתasinז עם רך, דamp מטלית. אין להשתמש בחומרי ניקוי שוחקים או ממסים. יש לוודא שאין נוזלים שנכנסים ליחידה.
• בדיקת חיבור: Annually, or if issues arise, have a qualified technician check all electrical connections for tightness and signs of corrosion.
• תנאים סביבתיים: Ensure the unit remains within its specified operating environment (temperature, humidity) and that its IP65 rating is not compromised by physical damage.

8. פתרון תקלות

If you encounter issues with your NA6888 unit, consider the following common troubleshooting steps. For complex problems, always consult a qualified technician.

If troubleshooting steps do not resolve the issue, contact AstralPool customer support or a certified service technician. Information regarding spare parts availability is not provided.

9. מפרטים

10. אחריות ותמיכה

Specific warranty terms for the NA6888 unit are typically provided at the point of purchase or can be obtained directly from AstralPool. Please retain your proof of purchase for warranty claims.

For technical support, service, or inquiries regarding spare parts, please contact AstralPool customer service or your authorized dealer. Contact information can usually be found on the AstralPool official webבאתר או במסמכי הרכישה שלך.