HGLRC F765

HGLRC Forward F765 Flight Stack Instruction Manual

Comprehensive guide for the HGLRC Forward F765 Flight Stack, featuring a dual gyro flight controller and BLHeli_32 65A 4-in-1 ESC.

1. הקדמה

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your HGLRC Forward F765 Flight Stack. This advanced flight stack integrates a dual-gyro F7 flight controller and a BLHeli_32 65A 4-in-1 Electronic Speed Controller (ESC), designed for high-performance FPV racing drones. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. המוצר נגמרview

The HGLRC Forward F765 Flight Stack is engineered for optimal performance and reliability in FPV applications. It features a robust design with advanced components to provide precise control and efficient power delivery.

HGLRC Forward F765 Flight Stack with dimensions

איור 2.1: HGLRC Forward F765 Flight Stack showing overall dimensions (46mm x 45mm x 25mm).

2.1 Flight Controller (FC) Features

  • מעבד: STM32F745VGT6
  • MPU: Dual gyros, ICM20608 (32K) & MPU6000-SPI, for enhanced flight stability.
  • קלט כרךtage: 3-6S Lipo.
  • Multiple UART ports for extensive peripheral connectivity.
מְפוֹרָט view of Flight Controller and ESC components

איור 2.2: תקריב view of the Flight Controller (top) highlighting the ICM20608, MPU6000, and STM32F745, and the ESC (bottom) with its STM32L431 CPU.

2.2 Electronic Speed Controller (ESC) Features

  • מעבד: STM32L431, 32-bit high-performance processor.
  • קושחה: BLHeli_32.
  • קלט כרךtage: 3-6S Lipo.
  • Steady Current: 65A.
  • שיא מקומי: 75A.
  • Integrated CNC multi-function heat sink for efficient heat dissipation and overcurrent protection.
  • Supports DSHOT1200/600/300/150, Oneshot125/42, MultiShot protocols.
HGLRC FD765 Stack overview with CPU and ESC details

איור 2.3: מֵעַלview of the FD765 Stack, indicating the STM32F745VGT6 CPU on the FC and the L431 BLHeli_32 65A ESC with a 75A peak current.

2.3 עיצוב חדשני

The stack incorporates an innovative soft mounting design to isolate the gyroscopes from frame vibrations, ensuring a stable and accurate operating environment for precise flight control.

Soft mounting design for the flight stack

איור 2.4: Illustration of the innovative soft design, showing the flight stack and the included rubber grommets for vibration isolation.

3. מפרטים

Table 3.1: HGLRC Forward F765 Flight Stack Specifications
רְכִיבתכונהפְּרָט
Flight Controller (FD F7)מעבדSTM32F745VGT6
MPUICM20608 (32K) & MPU6000-SPI (Dual Gyro)
קלט כרךtage3-6S Lipo
יציאות UART5
מידות46mm x 45mm x 25mm (Stack Height)
Electronic Speed Controller (FD 65A 4in1 ESC)מעבדSTM32L431 (48MHz)
קושחהBLHeli_32
קלט כרךtage3-6S Lipo
זרם קבוע65A
שיא זרם75A
BECלֹא
חיישן נוכחינתמך
TLMנתמך
מידות46 מ"מ x 45 מ"מ x 6 מ"מ
פרוטוקולים נתמכיםDSHOT1200/600/300/150, Oneshot125/42, MultiShot, Dampמוד ed
משקל כולל של הערימה41.7 גרם
גיל מומלץ על ידי יצרן14 שנים ומעלה
Detailed specifications for Flight Controller and ESC

איור 3.1: Visual representation of the Flight Controller and ESC specifications.

4. תכולת החבילה

ודא שכל הפריטים המפורטים להלן נמצאים בחבילה שלך:

  • 1x HGLRC Forward F765 Flight Controller
  • 1x HGLRC Forward 65A 4-in-1 BLHeli_32 ESC
  • 1x Connection Cable for FC to ESC
  • 1x XT60 Connector
  • 1x Electrolytic Capacitor (1000uF 35V)
  • 4x ברגים M3
  • 4x M3 אגוזים
  • 8x Rubber Grommets (for soft mounting)
  • Assorted signal and power wires
Contents of the HGLRC Forward F765 Flight Stack package

איור 4.1: All components included in the HGLRC Forward F765 Flight Stack package.

5. Setup & Wiring

Careful attention to wiring is crucial for the proper and safe operation of your flight stack. Refer to the diagrams below for correct connections.

5.1 ESC Wiring Diagram

Connect your motors and battery to the ESC as shown. Ensure correct polarity for the battery connection. The included capacitor should be soldered to the main battery pads (BAT+ and BAT-) on the ESC to filter power noise.

הווידאו 5.1: Official video demonstrating the HGLRC BLHeli_32 65A 4-in-1 ESC. This video provides a visual overview of the ESC and its wiring connections for motors and battery.

5.2 Flight Controller Connections

The F765 Flight Controller supports various peripherals. Connect your camera, VTX (Video Transmitter), RC Receiver, GPS, and Buzzer according to the diagram. Pay close attention to the correct UARTs and power pins.

הווידאו 5.2: הצגת וידאו רשמיתasing the HGLRC Forward F765 FC Flight Stack. This video provides a visual guide to the stack's components and a detailed FC wiring diagram for peripherals like camera, VTX, and receiver.

5.3 Mounting the Stack

Mount the flight stack onto your drone frame using the provided screws, nuts, and rubber grommets. The soft mounting grommets are essential for reducing vibrations transmitted to the flight controller's gyroscopes, improving flight performance.

HGLRC Forward F765 Flight Stack mounted on a drone frame

איור 5.3: The HGLRC Forward F765 Flight Stack correctly installed on a quadcopter frame.

6. הוראות הפעלה

After completing the physical installation and wiring, proceed with the software configuration and initial flight checks.

6.1 עדכון קושחה ותצורה

  1. התחבר למחשב: Use a USB cable to connect the flight controller to your computer.
  2. התקן דרייברים: Ensure necessary drivers (e.g., STM32 Virtual COM Port Driver, Zadig for DFU mode) are installed.
  3. קושחת בקר טיסה: Open Betaflight Configurator (or your preferred flight control software). Select the correct target for the F765 FC (e.g., HGLRCF765) and flash the latest stable firmware.
  4. קושחת ESC: Use BLHeliSuite32 to update and configure the ESCs. Ensure all ESCs are running the same firmware version.
  5. תצורה ראשונית: Follow the standard Betaflight setup wizard for sensor calibration, motor direction, receiver setup, and mode assignments.

6.2 בדיקות טרום טיסה

  • Verify all connections are secure and correctly oriented.
  • Check motor spin direction in Betaflight Motors tab (with propellers removed).
  • Confirm receiver inputs respond correctly in Betaflight Receiver tab.
  • ודא נפח הסוללהtage and current sensor readings are accurate.
  • Perform a range check with your radio system.

7. תחזוקה

Regular maintenance helps ensure the longevity and reliable performance of your HGLRC Forward F765 Flight Stack.

  • בדיקה חזותית: Periodically inspect the boards for any signs of damage, loose connections, or burnt components.
  • ניקוי: Keep the flight stack free from dust, dirt, and moisture. Use compressed air or a soft brush for cleaning. Avoid using liquids directly on the electronics.
  • עדכוני קושחה: Regularly check for and apply the latest firmware updates for both the FC (Betaflight) and ESCs (BLHeliSuite32) to benefit from performance improvements and bug fixes.
  • Soft Mounts: Inspect the rubber grommets for wear or damage. Replace them if they appear compressed or torn to maintain vibration isolation.

8. פתרון תקלות

This section addresses common issues you might encounter with your flight stack.

8.1 בעיות ופתרונות נפוצים

  • אין כוח:
    • Check battery connection polarity.
    • Inspect main power leads for breaks or poor solder joints.
    • Verify the XT60 connector is properly seated.
  • Motors Not Spinning / ESC Protocol Unknown:
    • Ensure the FC-to-ESC cable is correctly connected and not damaged.
    • Verify motor signal wires are connected to the correct pads (M1-M4).
    • Confirm ESC firmware is updated and configured correctly in BLHeliSuite32.
    • Check Betaflight motor output settings and ESC protocol selection.
  • Unstable Flight / Excessive Vibrations:
    • Ensure soft mounting grommets are correctly installed and not damaged.
    • Check for loose propellers or damaged motor bearings.
    • Recalibrate accelerometers and gyroscopes in Betaflight.
    • Adjust PID tuning if necessary.
  • אין אות וידאו:
    • Verify VTX and camera connections to the FC.
    • Check VTX power and ground connections.
    • Ensure VTX is powered on and set to the correct frequency/channel.
  • FC Not Connecting to Betaflight:
    • Ensure USB cable is functional and connected securely.
    • Install necessary USB drivers (STM32 Virtual COM Port Driver).
    • If in DFU mode, use Zadig to install the correct driver.
    • נסה יציאת USB או כבל אחר.

For more detailed troubleshooting, refer to online resources and community forums for Betaflight and BLHeli_32.

9. אחריות ותמיכה

HGLRC products are designed for performance and reliability. For warranty information and technical support, please refer to the official HGLRC webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם.

  • רִשְׁמִי Webאֲתַר: בקר ב HGLRC Official Webאֲתַר for product updates, FAQs, and contact information.
  • שֵׁירוּת לָקוֹחוֹת: For specific issues or warranty claims, contact HGLRC customer support through their webאֲתַר.
  • פורומים קהילתיים: Engage with the FPV community on forums and social media for peer support and shared knowledge.

Note: Damage caused by improper installation, misuse, or unauthorized modifications is not covered under warranty.

© 2023 HGLRC. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.