Beghelli 19432 LED חירום Lamp מדריך למשתמש

מָבוֹא

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

מידע בטיחות

יש להקפיד תמיד על הנחיות הבטיחות הבאות כדי למנוע התחשמלות, שריפה או פציעה:

• ודא שספק החשמל מנותק לפני התקנה או תחזוקה.
• יש לבצע את ההתקנה על ידי חשמלאי מוסמך בהתאם לתקנות החשמל המקומיות.
• אל תחשוף את ה-lamp ללחות מוגזמת או לטמפרטורות קיצוניות.
• אל תנסה לפתוח או לשנות את ה-lamp housing, as this may void the warranty and pose a safety risk.
• הרחק את חומרי האריזה מילדים.

תוכן החבילה

ודא שכל הרכיבים קיימים ולא ניזוקו:

• Beghelli 19432 LED חירום Lamp יְחִידָה
• Integrated Li-Fe Battery
• אביזרי הרכבה (ברגים, תקעים לקיר)
• מדריך למשתמש (מסמך זה)

התקנה והתקנה

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. בחר מיקום: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. הכן את משטח ההרכבה: Ensure the wall surface is clean, dry, and capable of supporting the lampמשקלו של.
3. סמן נקודות קידוח: השתמש ב-lamp's mounting holes as a template to mark the drilling points on the wall.
4. חורים לקדוח: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. הכנס תקעים לקיר: הכנס את תקעי הקיר המסופקים לתוך החורים הקדוחים.
6. הר את ה-Lamp: אבטח את ה-lamp to the wall using the provided screws. Ensure it is firmly attached.
7. חבר חשמל: חבר את ה-lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. חיוב ראשוני: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

הוראות הפעלה

The Beghelli 19432 operates automatically:

• פעולה רגילה: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• מצב חירום: In the event of a power failure, the lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• חזרה לשגרה: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

תַחזוּקָה

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• ניקוי: נקה את ה-lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• בדיקת סוללה: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• החלפת סוללה: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp תַחֲלִיף: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

פתרון בעיות

עיינו בטבלה שלהלן לקבלת בעיות נפוצות ופתרונותיהן:

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.

מפרטים

אחריות ותמיכה

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webבאתר או על אריזת המוצר.

מידע מיחזור: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.