מדריך למשתמש למתקן סבון מקציף אוטומטי של LAOPAO (דגם JS001)

המוצר נגמרview

The LAOPAO Automatic Foaming Soap Dispenser provides a touchless and hygienic solution for dispensing foaming soap. Featuring a precise infrared motion sensor, it delivers dense foam within 0.2 seconds. This versatile dispenser is suitable for various liquid soaps and can be used in kitchens, bathrooms, hospitals, and offices.

Image: The LAOPAO Automatic Foaming Soap Dispenser in blue and white, demonstrating foam dispensing.

הגדרה

1. התקנת סוללה

1. Locate the battery compartment on the bottom of the dispenser.
2. פתח את מכסה תא הסוללות.
3. Insert 3 x 1.5V AA batteries (not included), ensuring correct polarity.
4. Securely close the battery compartment cover. The battery compartment features a lock design to prevent corrosion.

Image: Diagram illustrating the battery compartment for 3x AA batteries and internal components.

2. Filling the Soap Tank

1. Gently twist and remove the top section of the dispenser from the transparent soap tank.
2. If using foaming soap, pour it directly into the tank.
3. If using ordinary gel or liquid soap (e.g., shower gel, detergent, shampoo, facial cleanser), dilute it with water at a 1:3 or 1:4 ratio (1 part soap to 3-4 parts water) to achieve optimal foam consistency.
4. Do not overfill the tank. The transparent material allows you to monitor the soap level.
5. Reattach the top section by aligning and twisting it securely onto the soap tank.

Image: Step-by-step guide for loading the soap tank, removing the lid, adding soap, and replacing the tank.

Image: Visual guide on supporting various hand soaps, including direct foaming soap and diluted gel/liquid soap.

3. התקנה על הקיר (אופציונלי)

The dispenser can be wall-mounted using the provided adhesive brackets. Attach the bracket to a clean, dry wall surface. The dispenser then slides onto the bracket for secure placement, saving countertop space.

הוראות הפעלה

1. הפעלה/כיבוי

Press and hold the power button located on the top of the dispenser to turn the device on or off. Indicator lights will confirm the status.

2. חלוקת סבון

Place your hand under the nozzle. The built-in infrared motion sensor will detect your hand and automatically dispense dense foaming soap within 0.2 seconds. The touchless operation ensures hygiene.

Image: The dispenser in action, highlighting its high sensitivity sensor and touchless operation for hygienic hand washing.

3. Adjusting Foam Volume

The dispenser offers 4 adjustable levels for foam volume. Briefly press the power button (do not hold) to cycle through the different volume settings. Indicator lights on the top panel will show the selected level. Options include 0.6g and 1.0g dispense amounts.

Image: Illustration of the high sensitivity sensor and adjustable foam output levels.

תַחזוּקָה

1. Refilling Soap

Monitor the transparent soap tank to see when the soap level is low. Follow the steps in the "Filling the Soap Tank" section to refill. It is recommended to refill before the tank is completely empty to avoid re-priming the system.

2. ניקיון

נגבו את החלק החיצוני של המתקן בעזרת מטלית רכהamp cloth. Avoid submerging the unit in water. The USB charging port is protected by a waterproof cover, but ensure it is sealed when not charging.

3. החלפת סוללה

When the battery indicator lights show low power, replace the 3 x 1.5V AA batteries following the "Battery Installation" steps. New batteries can power the device for approximately 3 months.

פתרון בעיות

• Dispenser not activating: Ensure the device is powered on. Check battery levels and replace if necessary. Confirm no obstructions are blocking the sensor.
• אין קצף או קצף חלש: Check soap level. Ensure liquid soap is diluted correctly (1:3 or 1:4 ratio with water). If the dispenser was completely empty, it might need re-priming by activating it several times until soap is drawn up.
• Excessive foam: Adjust the foam volume setting to a lower level using the power button.
• דְלִיפָה: Ensure the soap tank is securely twisted onto the main unit. The anti-dumping and leakage design prevents overflow when properly assembled.

מפרטים

אחריות ותמיכה

LAOPAO is committed to providing quality products and customer satisfaction. For any questions, concerns, or assistance with your Automatic Foaming Soap Dispenser, please contact our customer support. We offer guaranteed after-sales service.

Please refer to the product packaging or the official LAOPAO webבאתר לקבלת פרטי אחריות ספציפיים ופרטי יצירת קשר.