DEVMO AMS1117-5.0 5V Step-Down Linear Voltage Regulator Module

1. המוצר נגמרview

The DEVMO AMS1117-5.0 is a compact step-down linear voltage regulator module designed to convert a higher DC input voltage (6V to 12V) into a stable 5.0V DC output. This module is suitable for various electronic projects, including those compatible with Arduino platforms, where a regulated 5V power supply is required from a higher voltagהמקור.

תכונות מפתח כוללות:

• קלט כרךtagטווח e: מתח ישר של 6 וולט עד 12 וולט.
• פלט כרךtage: Stable 5.0V DC.
• זרם פלט מקסימלי: Up to 800mA with a 6V input, decreasing to 200mA with a 12V input, limited by internal power dissipation.
• קֶשֶׁר: Solderable pins for easy input and output connections.
• מַד: A PCB-mounted LED illuminates when voltage is applied to the module, indicating power status.

2. מפרטים

2.1. מפרט חשמלי

Note: The maximum output current is limited by the regulator's internal power dissipation and decreases as the input voltage increases. The module cannot provide 800mA output at all input voltages.

2.2. מפרט פיזי

3. התקנה והתקנה

This module is designed for easy integration into electronic circuits. Proper connection of input and output terminals is crucial for safe and correct operation.

Figure 1: Two DEVMO AMS1117-5.0 modules with included pin headers. The modules feature solder pads for input and output connections.

3.1. הוראות חיבור

1. זיהוי מסופים: The module has clearly marked solder pads for input and output. Typically, these are labeled '+' and '-' for input, and 'OUT' or '5V' for output. Refer to the module's silkscreen for exact markings.
2. חיבור קלט: Connect your DC power source (6V to 12V) to the input terminals. Ensure correct polarity: positive (+) of the power source to the '+' terminal of the module, and negative (-) to the '-' terminal.
3. חיבור פלט: Connect your load (e.g., Arduino board, 5V sensor) to the output terminals. Ensure correct polarity: the 5V output from the module to the positive input of your load, and the ground of the module to the ground of your load.
4. הַלחָמָה: Use appropriate soldering techniques to securely attach wires or pin headers to the module's pads. Ensure strong, clean solder joints to prevent intermittent connections.
5. מחוון חשמל: Once power is applied to the input, the onboard LED should illuminate, indicating that the module is receiving power and attempting to regulate the voltage.

3.2. אמצעי בטיחות

• Always verify input and output polarities before applying power to prevent damage to the module or connected devices.
• אל תחרוג מנפח הכניסה המרביtage של 12V DC.
• Ensure the total current drawn by your load does not exceed the module's maximum output current capacity for the given input voltage. Exceeding this limit can lead to overheating and damage.
• Avoid short circuits on the output terminals.
• Handle the module by its edges to avoid touching components, especially after operation, as it may be warm.

4. תפעול

The AMS1117-5.0 module operates as a linear voltage regulator. It dissipates excess input voltage as heat to maintain a stable 5.0V output. This means that the higher the input voltage and the higher the output current, the more heat the module will generate.

• הפעלה: החל DC voltage within the 6V to 12V range to the input terminals. The onboard LED will light up.
• כרך ידtage פלט: The module will provide a regulated 5.0V DC at its output terminals.
• מגבלה נוכחית: Be mindful of the current limitations. For example, with a 12V input, the maximum stable output current is approximately 200mA. If your load requires more current, consider using a lower input voltage (closer to 6V) or an alternative power regulation method.
• ניהול חום: For continuous operation at higher input voltages and currents, ensure adequate ventilation around the module to dissipate heat.

5. תחזוקה

The DEVMO AMS1117-5.0 module is a solid-state electronic component and generally requires minimal maintenance. However, following these guidelines can help ensure its longevity and reliable performance:

• נִקָיוֹן: Keep the module free from dust, dirt, and moisture. Use a soft, dry brush or compressed air to clean if necessary. Avoid using liquid cleaners.
• תנאים סביבתיים: Operate the module within its specified temperature range. Avoid extreme heat, cold, or humidity.
• בדיקה פיזית: Periodically inspect solder joints and connections for any signs of corrosion or damage.
• אִחסוּן: When not in use, store the module in an anti-static bag in a dry, cool environment.

6. פתרון תקלות

If you encounter issues with your DEVMO AMS1117-5.0 module, consider the following troubleshooting steps:

• ללא פלט כרךtage / LED Off:
  • בדוק אם קלט כרךtage is within the 6V to 12V range.
  • Verify input polarity. Incorrect polarity will prevent operation and may damage the module.
  • Inspect all connections for loose wires or poor solder joints.
  • ודא שמקור הכוח פועל כהלכה.
• פלט כרךtage is Lower Than 5V:
  • Check if the load current exceeds the module's maximum capacity for the given input voltage. Reduce the load or use a lower input voltage.
  • ודא את נפח הקלטtage יציב ואינו נופל תחת עומס.
  • The module might be overheating. Allow it to cool down and ensure proper ventilation.
• התחממות יתר של המודול:
  • This is common for linear regulators when the voltage difference between input and output is large, and the current draw is high.
  • הפחת את נפח הקלטtage if possible, or reduce the load current.
  • ודא זרימת אוויר נאותה סביב המודול.
• פעולה לסירוגין:
  • Check for cold solder joints or loose connections.
  • Ensure the power source is stable and not fluctuating.

7. אחריות ותמיכה

For warranty information, technical support, or further assistance with your DEVMO AMS1117-5.0 module, please refer to the seller's return policy or contact the DEVMO customer support directly through the platform where the product was purchased. Keep your purchase receipt or order details handy for faster service.

DEVMO is committed to providing quality electronic components. If you have any questions regarding the operation or integration of this module, do not hesitate to seek assistance.