1. הקדמה
The FTVOGUE Polypropylene Water Level Sensor Vertical Float Switch is designed for reliable and automatic liquid level control. This device is suitable for a wide range of applications, including water supply, drainage systems, and automatic liquid level control in various tanks or reservoirs. Its robust construction ensures stable performance and long service life.
2. מידע בטיחות
- Always disconnect power to the pump or system before installation, maintenance, or troubleshooting.
- Ensure all electrical connections are properly insulated and protected from moisture.
- אין לחרוג מהדירוגים החשמליים שצוינו של המתג.
- Operate within the recommended temperature range of 30°C to 80°C. Avoid temperatures above 85°C.
- אם אינך בטוח לגבי חיווט חשמלי, יש לבצע את ההתקנה על ידי אנשי מקצוע מוסמכים.
3. המוצר נגמרview
This vertical float switch is constructed from high-quality polypropylene, offering strong anti-interference capabilities, high stability, and resistance to corrosion. Its compact size facilitates easy installation and integration into existing systems.
תכונות עיקריות:
- חוֹמֶר: High-quality Polypropylene
- עֲמִידוּת: Non-toxic, corrosion-resistant, strong anti-interference ability
- יַצִיבוּת: High stability and long service life
- הַתקָנָה: Small size, simple wiring, easy to install and use
- יעילות אנרגטית: צריכת חשמל נמוכה
- טמפרטורת הפעלה: 30°C to 80°C (maximum 85°C)
Figure 3.1: FTVOGUE Vertical Float Switch, showing the main body and yellow connecting wires.
איור 3.2: צד view of the float switch, highlighting its polypropylene construction and compact design.
4. מפרטים
| מִפרָט | עֵרֶך |
|---|---|
| מותג | FTVOGUE |
| מספר דגם | FTVOGUEfbmo2hzndy |
| חוֹמֶר | פוליפרופילן |
| משקל פריט | 10 גרם |
| מידות המוצר | 6.8 x 2.5 x 2.5 ס"מ |
| טמפרטורת הפעלה | 30°C to 80°C (max 85°C) |
| סוללות נדרשות | לֹא |
| ארץ מוצא | סִין |
5. התקנה והתקנה
Proper installation is crucial for the accurate and reliable operation of the float switch. This device is designed for vertical mounting.
שלבי התקנה:
- בחר מיקום: Select a suitable location within the tank or reservoir where the liquid level needs to be monitored. Ensure the float can move freely without obstruction.
- הַרכָּבָה: Securely mount the float switch in a vertical position. The threaded portion of the switch is designed for easy integration into a compatible fitting. Use the provided sealing washer to ensure a watertight seal.
- תִיוּל: Connect the two yellow wires of the float switch to your pump control circuit. The switch acts as a simple open/close contact. Consult your pump's wiring diagram for specific connection points for liquid level control.
- מִבְחָן: After installation and wiring, carefully restore power and test the switch by manually raising and lowering the liquid level (or simulating it) to ensure it activates and deactivates the pump as intended.
Figure 5.1: The float switch shown in its intended vertical mounting orientation.
Figure 5.2: Close-up of the wiring connections on the float switch.
6. הוראות הפעלה
The FTVOGUE Vertical Float Switch operates based on the principle of buoyancy. As the liquid level changes, the internal float moves, activating or deactivating an electrical contact.
מִבצָע:
- When the liquid level rises, the float moves upwards. At a predetermined level, the float's movement triggers an internal switch.
- When the liquid level falls, the float moves downwards. At a predetermined level, the float's movement triggers the internal switch in the opposite direction.
- This switching action can be used to start or stop a pump, activate an alarm, or control other devices based on the liquid level.
- The switch can be configured for either normally open (NO) or normally closed (NC) operation depending on your wiring and application requirements.
7. תחזוקה
The FTVOGUE float switch is designed for minimal maintenance due to its durable polypropylene construction. However, periodic inspection is recommended to ensure optimal performance.
טיפים לתחזוקה:
- בדיקה חזותית: Regularly check the float switch for any signs of physical damage, wear, or accumulation of debris that might impede float movement.
- ניקוי: If operating in environments with suspended solids or viscous liquids, periodically clean the float and stem to prevent buildup. Use mild soap and water; avoid harsh chemicals.
- בדיקת חיווט: ודא שכל החיבורים החשמליים יישארו מאובטחים וחופשיים מקורוזיה.
- מבחן פונקציונליות: Periodically test the switch's operation by observing its response to changing liquid levels.
8. פתרון תקלות
If the float switch is not operating as expected, consider the following common issues and solutions:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Switch does not activate/deactivate | חיווט שגוי | Verify wiring against your pump control circuit diagram. |
| ציפה חסומה | Check for debris or physical obstructions preventing float movement. Clean if necessary. | |
| מתג לא תקין | Test the switch with a multimeter for continuity. Replace if faulty. | |
| Inconsistent switching | Debris on float/stem | Clean the float and stem thoroughly. |
| Excessive turbulence | Consider installing a baffle or stilling tube around the float switch to reduce turbulence. |
9. אחריות ותמיכה
For warranty information or technical support, please contact FTVOGUE customer service through the retailer where the product was purchased or visit the official FTVOGUE brand store online. Please have your model number (FTVOGUEfbmo2hzndy) and purchase details ready when contacting support.
FTVOGUE is committed to providing quality products and customer satisfaction. For more information about FTVOGUE products, you can visit the FTVOGUE Store.