מדריך הוראות למצלמת אבטחה מזויפת BNT (דגם BNT-K8FaCam-2PW)

1. הקדמה

The BNT Dummy Fake Security Camera is designed to provide a realistic visual deterrent against potential intruders. Its appearance closely mimics that of a functional surveillance camera, aiming to reduce the likelihood of criminal activity by creating the impression of active monitoring. This manual provides essential information for the proper setup, operation, and maintenance of your dummy camera.

Image 1.1: Two BNT white dummy fake security cameras, showcasing their realistic design.

2. מה בקופסה

Upon opening your package, you should find the following components:

• BNT Bullet Simulation Fake Camera (White) x 2
• ברגים להתקנה
• מדריך למשתמש (מסמך זה)
• Warning Security Alert Sticker Decal x 2

Image 2.1: Package contents showing two dummy cameras, warning stickers, and screws.

3. תכונות

• עיצוב ריאליסטי: Mimics the appearance of a real surveillance camera.
• אור LED מהבהב: Features a built-in red LED light that illuminates at night, simulating active recording.
• חיישן פוטואלקטרי: Automatically activates the red LED light in low-light conditions.
• בנייה עמידה: Made from Acrylonitrile Butadiene Styrene (ABS) for indoor and outdoor use.
• עָמִיד: IP65 International Protection Rating ensures resistance to water.
• התקנה קלה: No wiring required, mounts easily to ceilings or walls.
• זווית מתכווננת: Features 2-axis rotation for flexible positioning (360-degree rotation, 90-degree tilt).
• מקור כוח: Operates on 2 AA batteries (not included).

Image 3.1: Close-up of the dummy camera's front, showing the dummy lens, red LED, and rotation capabilities.

4. התקנה והתקנה

4.1. התקנת סוללה

1. Locate the battery compartment on the camera. This is typically found by sliding open the back cover.
2. הכניסו 2 סוללות AA (לא כלולות) לתא, תוך הקפדה על קוטביות נכונה (+/-).
3. סגור היטב את תא הסוללות.

Image 4.1: Illustration of battery insertion into the dummy camera.

4.2. הרכבת המצלמה

The camera can be easily installed on a ceiling or wall using the provided screws. No complex wiring is necessary.

1. Choose a suitable location for installation, considering visibility and desired deterrent effect.
2. Position the mounting base against the surface and mark the screw holes.
3. Drill pilot holes if necessary, then secure the mounting base with the provided screws.
4. חבר את המצלמה לבסיס המותקן.
5. Adjust the camera's angle using its 2-axis rotation feature to achieve the desired coverage.

Video: BNT Dummy Fake Security Camera Overview

סרטון 4.2.1: סרטון זה מספק סקירה כלליתview of the BNT Dummy Fake Security Camera, highlighting its features and realistic appearance.

Video: Protecting Property with Fake Cameras

Video 4.2.2: This video demonstrates how fake cameras can be used to enhance property security and deter potential threats.

5. הוראות הפעלה

The BNT Dummy Fake Security Camera is designed for simple, autonomous operation:

• Once batteries are installed, the built-in photoelectric sensor will detect ambient light levels.
• During daylight hours, the red LED light will remain off.
• As darkness falls, the photoelectric sensor will automatically activate the red LED light, causing it to illuminate. This simulates the operation of a real security camera's night vision or recording indicator.
• The camera provides 24/7 visual deterrence without any manual intervention after initial setup.

Image 5.1: The dummy camera's red LED light is active at night, providing a visual deterrent.

6. תחזוקה

• החלפת סוללה: When the red LED light dims or stops illuminating, it is time to replace the batteries. Ensure to use high-quality AA batteries to prevent leakage and damage to the battery case.
• הגנת הסביבה: When replacing batteries, take care to avoid exposing the internal components to rain or moisture to maintain the lifespan of the battery case.
• רְשׁוּת: Please dispose of used batteries properly according to local regulations to protect the environment.
• ניקוי: Periodically wipe the camera's exterior with a soft, damp מטלית להסרת אבק ופסולת. הימנע משימוש בכימיקלים קשים.

7. פתרון תקלות

7.1. LED Light Not Illuminating at Night

• בדוק סוללות: Ensure that 2 AA batteries are correctly installed and are not depleted. Replace if necessary.
• Test Photoelectric Sensor: In a dark environment, cover the LED light with your hand. If the red LED light turns on, the product is functioning correctly. If it does not, check battery installation again.
• גורמים סביבתיים: Ensure the camera is not installed in an area with ambient light at night (e.g., streetlights, porch lights) that might prevent the photoelectric sensor from detecting sufficient darkness to activate the LED.

8. מפרטים

9. אחריות ותמיכה

BNT provides reliable 24-month after-sales service for this product. If you have any questions, concerns, or require assistance with your BNT Dummy Fake Security Camera, please contact our dedicated customer service team. We are committed to ensuring your satisfaction.