Wuloo WL666 Wireless Intercom System User Manual

1. הקדמה

This manual provides detailed instructions for the Wuloo WL666 Wireless Intercom System. Please read this manual thoroughly before operating the device to ensure proper use and to maximize its functionality. The Wuloo WL666 is designed for reliable, clear communication within homes, offices, and businesses, offering a wireless solution without the need for Wi-Fi.

Figure 1: Wuloo WL666 Wireless Intercom System (3-pack)

2. תכונות מוצר

• תקשורת אלחוטית: Operates on FM wireless technology, eliminating the need for Wi-Fi or complex wiring.
• טווח מורחב: Offers a communication range of up to 5280 feet (approximately 1 mile) in open areas, ensuring clear sound quality over long distances.
• Multi-Channel & Code System: Features 10 channels and 3 digital codes (A/B/C) to enhance privacy and prevent interference from other intercoms.
• פונקציות מגוונות: Includes Monitor, Talk, VOX (Voice Operated Exchange), Group, and Calling functions for various communication needs.
• אפשרות חשמל ניידת: Compatible with 5V 1A power banks for outdoor or mobile use (power bank not included).
• התקנה קלה: Designed with a back hole for convenient wall mounting.

Figure 2: Key features of the Wuloo WL666 Intercom System.

3. תכולת החבילה

The Wuloo WL666 Wireless Intercom System (3-pack) includes the following items:

• 3 x Wuloo WL666 Intercom Units
• 3 x Power Cords (USB to DC 5V)
• 3 x AC Adapters (5V 1A)
• מדריך למשתמש אחד (מסמך זה)

Figure 3: Contents of the Wuloo WL666 3-station package.

4. הוראות התקנה

Follow these steps to set up your Wuloo WL666 Wireless Intercom System:

4.1. חיבור חשמל AC

1. Connect the provided USB power cord to the DC 5V port on the back of each intercom unit.
2. חבר את מתאם ה-AC לשקע רגיל בקיר.
3. ודא שכל היחידות דולקות.

Note: This intercom system does not support batteries. It requires continuous AC power or a compatible power bank (DC 5V 1A) for operation.

4.2. Code Setting (A/B/C)

Each intercom unit has a switch near the power port to select a digital code (A, B, or C). For secure communication, ensure all intercoms intended to communicate with each other are set to the same code.

1. Locate the A/B/C switch on the side of each intercom unit.
2. Slide the switch to select your desired code (A, B, or C). All units in your system should use the same code.

Figure 4: Intercom unit layout with digital code switch highlighted.

4.3. הגדרת ערוץ

Each intercom unit can be assigned a unique channel number (0-9). This allows for direct communication between specific units within your system.

1. On each intercom unit, press and hold any channel number key (0-9) for 3 seconds to set its channel. The display will show the selected channel.
2. Assign a different channel number to each unit for individual calling.
3. It is recommended to set all stations to the same code (A, B, or C) but with different channel numbers. This allows you to simply adjust the channel to make calls without needing to set a new code each time.

Figure 5: Visual guide for code and channel settings.

4.4. Address List (Optional for Large Systems)

For larger intercom systems with many units, creating an address list can help you remember which intercoms belong to which users or locations. Record the channel number for each user.

Example: Member A: Code A Channel 1, Member B: Code A Channel 2, etc.

5. הוראות הפעלה

5.1. Basic Communication (Call & Talk)

1. To Call Another Unit: Short press the channel number key (0-9) of the intercom unit you wish to communicate with. The receiving unit will ring.
2. לדבר: After the call rings, press and hold the לְדַבֵּר button to speak. Release the button to listen.
3. התאמת עוצמת הקול: השתמש ב- VOL+ ו כרך- buttons to adjust the speaker volume.

5.2. VOX (Voice Operated Exchange) Mode

VOX mode allows for hands-free communication without continuously pressing the TALK button. It activates when it detects a voice within a close speaking range.

1. הפעלת VOX: הקש על קוֹל button on your unit. The channel number key will flash blue.
2. Speaking in VOX: Speak close to the microphone to activate VOX mode. The indicator light will turn red, and the number key will stop flashing. You can then speak, and the other unit will receive your voice message.
3. Listening in VOX: The other user can press and hold the לְדַבֵּר button to reply.

Note: VOX mode has a 24-hour time limit. If there are no manual changes to other channels, VOX mode will automatically exit after 24 hours. You need to reset it again every 24 hours for continuous use. Communication in VOX mode may have a slight delay, and it's recommended to speak one by one.

5.3. מצב מוניטור

Monitor mode allows you to listen to audio from a specific room (e.g., a baby's room) without needing voice activation.

1. Activate Monitor: Place the intercom unit you wish to monitor in the desired room. Press the מוניטור button on this unit. The light on the device will turn red, indicating it's in monitored state.
2. הַקשָׁבָה: On your listening unit, press and hold the Channel number key for 3 seconds to set the same channel as the monitored unit. You will then receive audio from the monitored room.

Note: The monitored unit will stay in transmit mode and cannot receive any information unless you exit this mode. Keep the device as close as possible to the person being monitored to pick up voice clearly. Monitor mode has a 10-hour time limit. If you need to monitor for a longer period, please reset it every 10 hours.

5.4. מצב קבוצתי

Group mode allows you to broadcast your voice to all intercom stations simultaneously within your system, even if they are on different channels but the same code.

1. Activate Group Call: לחץ והחזק את קְבוּצָה לַחְצָן.
2. Speaking in Group: תוך כדי החזקת קְבוּצָה button, speak into your unit. Your message will be transmitted to all other units in the system.

Note: To confirm if an intercom station is part of your system, check its frequency and code using the frequency table in the detailed manual.

6. תחזוקה

• ניקוי: Use a soft, dry cloth to clean the exterior of the intercom units. Do not use liquid cleaners or aerosols.
• אִחסוּן: Store the units in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
• ספק כוח: Always use the original power adapters provided with the system. Using incompatible adapters may damage the device.
• טיפול באנטנה: Handle the antenna gently to avoid bending or breaking it, which could affect signal quality.

7. פתרון תקלות

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Wuloo customer support for assistance.

8. מפרטים

9. אחריות ותמיכה

9.1. מידע על אחריות

Wuloo products are designed for durability and reliability. For specific warranty details, please refer to the warranty card included with your product or visit the official Wuloo webאתר. שמור את קבלת הרכישה כהוכחת קנייה לתביעות אחריות.

9.2. תמיכת לקוחות

For technical assistance, troubleshooting, or any questions regarding your Wuloo WL666 Wireless Intercom System, please contact Wuloo customer support:

• תמיכה מקוונת: בקר ב Wuloo Store on Amazon לשאלות נפוצות ואפשרויות יצירת קשר.
• אֶלֶקטרוֹנִי: Refer to your product packaging or the Wuloo webאתר לקבלת פרטי יצירת קשר עדכניים ביותר בדוא"ל.

Please have your model number (WL666) and purchase date ready when contacting support.