Teknetics Tek-Point Pulse Induction Pinpointer User Manual

1. הקדמה

Thank you for choosing the Teknetics Tek-Point Pulse Induction Pinpointer. This device is designed to accurately locate metal objects in various environments, including soil, sand, and underwater. Its pulse induction technology provides enhanced sensitivity, especially in mineralized ground. Please read this manual thoroughly before operating your pinpointer to ensure proper use and to maximize its performance and longevity.

The Tek-Point is a fully waterproof pinpointer, submersible to 6 feet, making it suitable for both fresh and saltwater use. It features an LED light for low-light conditions and comes with a belt holster for convenient carrying.

2. המוצר נגמרview

The Tek-Point pinpointer is engineered for precision and durability. Familiarize yourself with its main components and features.

איור 1: Teknetics Tek-Point Pulse Induction Pinpointer. This image displays the green-colored pinpointer, highlighting its compact design, the tip for detection, and the control button. A belt holster is also visible, indicating its portability.

תכונות עיקריות:

• Pulse Induction Technology: Provides superior depth and sensitivity, especially in challenging ground conditions.
• Waterproof עיצוב: Fully submersible up to 6 feet (1.8 meters) for use in wet environments.
• מצבי זיהוי: Offers audible beep, vibration, or a combination of both for target indication.
• אור LED: Integrated LED for illuminating the target area in low-light conditions.
• פעולת כפתור בודד: Simple and intuitive control for all functions.
• 3 Sensitivity Levels: Adjustable sensitivity to fine-tune detection for various target sizes and conditions.
• Lost Mode Alarm: An alarm feature to help locate the pinpointer if misplaced.
• נרתיק לחגורה: Included for convenient and secure carrying.

3. התקנה

3.1 התקנת סוללה

The Tek-Point pinpointer requires one 9V battery (not included) for operation. Ensure the battery is fresh and correctly installed for optimal performance.

1. Locate the battery cap at the rear end of the pinpointer.
2. Unscrew the battery cap by turning it counter-clockwise.
3. Insert a fresh 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the pinpointer's contacts.
4. Carefully screw the battery cap back on clockwise until it is securely tightened. Ensure the O-ring seal is properly seated to maintain the waterproof integrity of the device.

חָשׁוּב: Always ensure the battery cap is fully tightened before submerging the pinpointer in water to prevent water ingress and damage.

4. הוראות הפעלה

4.1 הפעלה/כיבוי

• To turn on the pinpointer, press and hold the power button for approximately 1 second until you hear a short beep and/or feel a vibration. The LED light will also illuminate briefly.
• To turn off the pinpointer, press and hold the power button for approximately 2 seconds until you hear a longer beep and/or feel a longer vibration. The LED light will turn off.

4.2 התאמת רגישות

The Tek-Point has 3 sensitivity levels. Adjusting the sensitivity allows you to optimize detection for different target sizes and ground conditions.

1. With the pinpointer powered on, quickly press the power button repeatedly to cycle through the sensitivity levels.
2. Each press will advance to the next sensitivity level, indicated by a series of short beeps/vibrations (e.g., one beep for Level 1, two for Level 2, three for Level 3).
3. Level 1 is the lowest sensitivity, suitable for large targets or highly mineralized ground. Level 3 is the highest sensitivity, ideal for small targets or less mineralized ground.

4.3 Detection Modes (Beep, Vibrate, Both)

The pinpointer can be set to beep, vibrate, or both when a target is detected.

• To change the detection mode, press and hold the power button for approximately 3 seconds (after powering on, but before powering off). The pinpointer will cycle through the modes: Beep Only, Vibrate Only, Beep + Vibrate.
• Release the button when you reach your desired mode.

4.4 Lost Mode Alarm

If the pinpointer is left on and inactive for a period (typically 5 minutes), it will emit an audible alarm to help you locate it. This feature helps prevent accidental loss in the field.

4.5 שימוש באור LED

The integrated LED light automatically activates when the pinpointer is turned on, providing illumination for the target area. It will turn off when the pinpointer is powered off.

5. תחזוקה

5.1 ניקוי

• After each use, especially in wet or sandy conditions, rinse the pinpointer with fresh water.
• נגב את המכשיר עם רך, דamp בַּד. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• Ensure the battery cap area and O-ring are free of dirt and debris.
• Allow the pinpointer to air dry completely before storage.

5.2 טיפול בסוללה

• Remove the battery if the pinpointer will not be used for an extended period to prevent leakage and damage.
• השלך סוללות משומשות בצורה אחראית בהתאם לתקנות המקומיות.

5.3 אחסון

Store the pinpointer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided belt holster for protection during transport and storage.

6. פתרון תקלות

7. מפרטים

• דֶגֶם: TEK-POINT
• טכנולוגיית זיהוי: אינדוקציה לדופק
• עמידות במים: Fully submersible to 6 feet (1.8 meters)
• רמות רגישות: 3 (ניתן להתאמה)
• מצבי זיהוי: Audio Beep, Vibration, Audio + Vibration
• מקור כוח: 1x 9V Battery (not included)
• תכונות משולבות: LED Light, Lost Mode Alarm
• חוֹמֶר: פלסטיק עמיד
• מידות: בערך 10.3 x 3.3 x 2 אינץ' (26.2 x 8.4 x 5.1 ס"מ)
• מִשׁקָל: Approximately 9.6 ounces (272 grams) without battery
• אביזרים כלולים: נרתיק חגורה

8. אחריות ותמיכה

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Teknetics webאתר. שמור את קבלת הרכישה כהוכחת קנייה לתביעות אחריות.

יַצרָן: Teknetics

For further assistance, you may contact Teknetics customer service through their official channels. Details are typically available on the manufacturer's webבאתר או באריזת המוצר.