Legrand 1597TRW

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Model: 1597TRW

מָבוֹא

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

מידע בטיחות

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

  • יש לנתק תמיד את החשמל בלוח השירות לפני עבודה עם חיווט חשמלי.
  • Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
  • אין להתקין במקומות רטובים אלא אם כן הם מיועדים במיוחד לשימוש כזה.
  • ודא שכל חיבורי החוטים מאובטחים ומבודדים כראוי.
  • Test the GFCI outlet monthly to ensure proper operation.

תוכן החבילה

ודא שכל הרכיבים קיימים לפני תחילת ההתקנה:

  • Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
  • ברגי הרכבה
  • מדריך הוראות (מסמך זה)

Note: A screwless wall plate is not included and must be purchased separately.

הַתקָנָה

Follow these steps for proper installation of your GFCI outlet:

  1. כבה את המתח: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltagבודק e.
  2. הסר שקע ישן: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
  3. זיהוי חוטים:
    • LINE Wires: These wires bring power from the circuit breaker to the GFCI outlet.
    • LOAD Wires: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
    • חוט הארקה: Typically bare copper or green insulated.
  4. Connect Wires to GFCI:
    • חבר את קַו wires to the terminals marked "LINE" on the GFCI outlet.
    • חבר את לִטעוֹן wires to the terminals marked "LOAD" on the GFCI outlet.
    • חבר את חוט הארקה לבורג הקרקע הירוק.

    חָשׁוּב: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.

  5. Mount the Outlet: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
  6. התקן לוחית קיר: Attach the screwless wall plate (not included) over the GFCI outlet.
  7. החזר כוח: הפעל מחדש את החשמל במפסק החשמל.
Legrand 1597TRW GFCI Outlet, front view

תמונה: חזית view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

מִבצָע

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

  • כפתור אתחול: לאחר התקנה או הפסקת חשמלtage, press the red RESET button to restore power to the outlet.
  • לחצן TEST: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

בדיקה חודשית:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

  1. תקע אלamp or other device into the GFCI outlet and turn it on.
  2. Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
  3. Press the red RESET button. The lamp should turn back on.
  4. אם ה-lamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

תַחזוּקָה

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

  • Keep the outlet clean and free from dust and debris.
  • Do not paint over the GFCI outlet or its buttons, as this can impair operation.
  • If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

פתרון בעיות

בְּעָיָה סיבה אפשרית פִּתָרוֹן
GFCI לא יתאפס.
  • אין חשמל ל-GFCI.
  • זוהתה תקלת קרקע.
  • Line-load reversal miswire.
  • Faulty GFCI.
  • בדוק מפסק.
  • Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device.
  • Verify wiring connections (LINE to LINE, LOAD to LOAD).
  • Replace the GFCI.
GFCI מופעל לעתים קרובות.
  • Faulty appliance/device.
  • Moisture in the circuit.
  • חיווט פגום.
  • Identify and remove the faulty appliance.
  • Ensure the environment is dry.
  • התייעץ עם חשמלאי מוסמך לבדיקת החיווט.
אין חשמל לשקע.
  • GFCI מעד.
  • מפסק מעגל מעד.
  • חיווט לא נכון.
  • לחץ על הלחצן RESET.
  • בדוק ואפס את המפסק.
  • ודא את חיבורי החיווט.

מפרטים

  • דֶגֶם: 1597TRW
  • מותג: לגראנד
  • צֶבַע: לָבָן
  • Ampעידן: 15 Amps
  • כרך ידtage: 125 וולט
  • סך כל שקעי החשמל: 2
  • סוג מחבר: נמה 5-15
  • חוֹמֶר: מַתֶכֶת
  • תכונות: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
  • UPC: 680147085438
  • ASIN: B079LTP7Y5

אחריות ותמיכה

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official webאתר או אריזת מוצר.

© 2024 לגראנד. כל הזכויות שמורות. המידע במדריך זה עשוי להשתנות ללא הודעה מוקדמת.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.