מדריך למשתמש

1. הקדמה

תודה על הרכישהasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

איור 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. מידע בטיחות חשוב

אזהרה: סכנת התחשמלות. נתק את החשמל בתיבת הנתיכים או במפסק החשמל לפני התקנה או שירות.

• קרא בעיון את כל ההוראות לפני תחילת ההתקנה.
• כל החיבורים החשמליים חייבים להיות בהתאם לתקנות המקומיות, לתקנות או לקוד החשמל הלאומי (NEC). התייעץ עם חשמלאי מוסמך אם אינך מכיר את חיבורי החיווט החשמליים בצורה נכונה.
• Use only UL-listed wire connectors for the electrical connections.
• אל תחרוג מהוואט המרביtage specified for this fixture (14 Watts per bulb).
• יש ללבוש משקפי מגן וציוד מגן מתאים במהלך ההתקנה.
• ודא שהמתקן מוארק כהלכה.

3. תכולת החבילה

ודא שכל הרכיבים קיימים לפני תחילת ההתקנה:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• חומרת הרכבה (ברגים, אומים חוט, תושבת הרכבה)
• הערה: נורות אינן כלולות.

4. מפרטים

5. התקנה והתקנה

כלים נדרשים: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

שלבי התקנה מראש:

1. כבה את החשמל: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. הכינו את האזור: Clear the work area and ensure you have stable footing if using a ladder.
3. לִפְרוֹק: Carefully remove the fixture and all components from the packaging.

שלבי התקנה:

1. חבר את תושבת הרכבה: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. חבר חוטי חשמל:
   • חבר את שָׁחוֹר (hot) wire from the ceiling to the שָׁחוֹר wire of the fixture using a wire nut.
   • חבר את לָבָן (neutral) wire from the ceiling to the לָבָן wire of the fixture using a wire nut.
   • חבר את טָחוּן wire (bare copper or green) from the ceiling to the טָחוּן wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. מתקן מאובטח לתושבת ההרכבה: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. התקן נורות: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. חבר אהיל זכוכית: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. החזר כוח: לאחר השלמת ההתקנה וכל החיבורים מאובטחים, יש להחזיר את החשמל למפסק החשמל.

6. הוראות הפעלה

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. טיפול ותחזוקה

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• ניקוי המתקן: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• ניקוי אהיל הזכוכית: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• החלפת נורה: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage וסוג בסיס.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. פתרון תקלות

אם אתם נתקלים בבעיות עם גוף התאורה שלכם, עיינו בבעיות הנפוצות ובפתרונות הבאים:

• האור לא נדלק:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• הבהוב אור:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

9. אחריות ותמיכת לקוחות

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website or the contact information provided in your product packaging. Please have your model number (40804) and purchase details ready when contacting support.