מדריך למשתמש של גוזם הברשות בנזין GREENCUT GGT650X-8

1. הקדמה

Thank you for choosing the GREENCUT GGT650X-8 Petrol Brushcutter. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the brushcutter and keep it for future reference. Proper use and maintenance will ensure optimal performance and extend the life of your equipment.

2. הוראות בטיחות

אזהרה: אי הקפדה על הוראות בטיחות אלה עלולה לגרום לפציעה חמורה או למוות.

2.1 בטיחות כללית

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, long pants, and sturdy footwear.
• Never operate the brushcutter under the influence of alcohol, drugs, or medication that may impair judgment.
• יש להרחיק ילדים, עוברי אורח וחיות מחמד במרחק בטוח (לפחות 15 מטרים) מאזור ההפעלה.
• Inspect the work area for obstacles such as rocks, wires, or debris before starting.
• אין להפעיל בתנאים רטובים או בגשם.

2.2 בטיחות דלק

• Mix fuel (unleaded 95 petrol and synthetic 2-stroke oil at a 4% ratio) in a well-ventilated area away from ignition sources.
• Store fuel in approved containers and away from heat or open flames.
• לעולם אל תמלא דלק במנוע חם. יש לאפשר למנוע להתקרר לפני הוספת דלק.
• נגב מיד כל דלק שנשפך.

2.3 בטיחות תפעול

• Ensure all guards and attachments are correctly installed before operation.
• Hold the brushcutter firmly with both hands using the ergonomic double-grip handlebars.
• Be aware of kickback, especially when using blades.
• Use the engine lock system for added safety when not actively cutting.
• Turn off the engine before making any adjustments or clearing blockages.

3. המוצר נגמרview

The GREENCUT GGT650X-8 is a versatile and robust petrol brushcutter designed for effective grass and weed control. It features a powerful 65cc 2-stroke engine and a range of interchangeable cutting accessories.

3.1 תכונות עיקריות

• מָנוֹעַ: 65cc, 4.9hp 2-stroke petrol engine.
• מערכת הפעלה: Easy-Start and CDI electronic ignition for reliable starting.
• סינון אוויר: Double-element air filter for reduced wear and maintenance.
• כידון: Ergonomic double-grip handlebars with integrated controls and safety throttle lock.
• מערכת חיתוך: Tap 'n Go system for quick accessory changes.
• פִּיר: מוט מתחלק להובלה ואחסון קלים.

3.2 Components and Included Accessories

The following components and accessories are typically included with your GREENCUT GGT650X-8 brushcutter:

Image: The GREENCUT GGT650X-8 brushcutter with its various cutting heads, harness, and protection kit.

• Brushcutter unit (x1)
• 8-point circular blade (x1)
• Nylon line head (x2)
• 2-point blade (x2)
• 3-point blade (x1)
• Circular blade (x2)
• Reinforced and padded harness (x1)
• Protection kit (x1)
• מדריך הוראות (x1)

Image: Diagram showing key parts: Starter button, Throttle block, Throttle trigger, Spark plug, Exhaust silencer, Easy-start starter, Double handlebars, Protector, and Head.

4. התקנה והרכבה

4.1 Assembling the Shaft and Handlebars

1. Connect the two sections of the divisible shaft. Ensure the connection is secure and locked into place.
2. Attach the double-grip handlebars to the shaft at a comfortable working height. Tighten all fasteners securely.

4.2 Attaching the Guard and Cutting Head

1. Mount the protective guard over the cutting head area. Ensure it is firmly attached to prevent debris from striking the operator.
2. Select the appropriate cutting head for your task:
   • ראש חוט ניילון: Ideal for fine grass and delicate turf.
   

   Image: Two types of nylon line heads, suitable for cutting fine grass and delicate turf.

   • 2-point and 3-point Blades: Suitable for shredding bushes, brambles, shrubs, and other plants.
   

   תמונה: דוגמהamples of 2-point and 3-point blades, effective for tougher vegetation.

   • Circular Blades (8-point, 40-tooth, Widia 40-tooth, 2-tooth shredder): Best for areas with shrubs, bushes, brambles, and thin trees.
   
   Image: Two types of circular blades, designed for dense vegetation and small woody growth.
3. Attach the chosen cutting head using the Tap 'n Go system as per the instructions provided with the accessory. Ensure it is securely fastened.

4.3 Fuel Mixture

The GGT650X-8 uses a 2-stroke engine and requires a specific fuel mixture:

• לְעַרְבֵּב unleaded 95 petrol עִם synthetic 2-stroke engine oil at a ratio of 4% oil to petrol (e.g., 40ml oil per 1 liter of petrol).
• Use a clean, approved fuel mixing container.
• Shake the mixture well before pouring it into the brushcutter's fuel tank.
• Ensure the fuel tank cap is securely closed to prevent leaks.

5. הוראות הפעלה

5.1 Starting the Engine (E-Start System)

1. הנח את גוזם המברשת על משטח ישר ויציב.
2. Ensure the fuel tank is filled with the correct fuel mixture.
3. Set the choke lever to the 'START' or 'CLOSED' position (consult engine diagram for exact location).
4. לחץ על נורת הפריים מספר פעמים עד שניתן יהיה לראות דלק בצינור החזרה.
5. Pull the starter cord firmly and smoothly until the engine attempts to start or fires briefly. Do not pull the cord to its full extension.
6. Once the engine fires, move the choke lever to the 'RUN' or 'OPEN' position.
7. משוך שוב את חוט המתנע עד שהמנוע יתניע.
8. יש לאפשר למנוע להתחמם לכמה רגעים לפני לחיצה על דוושת הגז.

5.2 Operating the Brushcutter

• Wear the reinforced and padded harness for comfort and stability. Adjust it to fit properly.
• Hold the brushcutter with both hands on the handlebars.
• To increase engine speed and engage the cutting head, press the throttle trigger. The throttle has a safety lock that must be disengaged first.
• Move the cutting head in a sweeping motion across the vegetation.
• Avoid striking hard objects or the ground with the cutting head.

5.3 עצירת המנוע

• Release the throttle trigger to allow the engine to return to idle speed.
• Press the engine stop button (usually located on the handlebar controls) to shut off the engine.

6. תחזוקה

Regular maintenance is crucial for the longevity and safe operation of your brushcutter.

6.1 ניקוי מסנן אוויר

• Periodically inspect and clean the double-element air filter.
• Remove the air filter cover and carefully take out the filter elements.
• Clean foam elements with warm, soapy water, rinse thoroughly, and allow to dry completely. Lightly oil foam elements before reinstallation.
• Clean paper elements by tapping them gently or using compressed air (from the inside out). Do not wash paper elements.
• Reinstall the clean filter elements and secure the cover.

6.2 בדיקת מצת

• Remove the spark plug cover and disconnect the spark plug wire.
• השתמש במפתח מצת כדי להסיר את המצת.
• בדוק את מצת ההצתה לאיתור הצטברות פחמן או נזק. נקה בעזרת מברשת תיל במידת הצורך.
• בדוק את מרווח האלקטרודות והתאם במידת הצורך (עיין במפרטים לקבלת מרווח נכון).
• Replace the spark plug if it is heavily fouled or damaged.
• התקן מחדש את מצת וחבר מחדש את החוט.

6.3 Cutting Head Maintenance

• Regularly inspect cutting blades for sharpness and damage. Sharpen or replace as needed.
• For nylon line heads, replace the line when it becomes too short or worn.
• Keep the cutting head area free of tangled grass and debris.

6.4 אחסון

• Before storing, clean the brushcutter thoroughly.
• Drain the fuel tank or run the engine until it runs out of fuel to prevent fuel degradation issues.
• Store the brushcutter in a dry, well-ventilated area, out of reach of children.

7. פתרון תקלות

This section addresses common issues you might encounter with your brushcutter.

8. מפרט טכני

Image: Visual representation of the engine's key specifications.

Image: Diagram illustrating the overall dimensions of the brushcutter.

9. אחריות ותמיכה

Your GREENCUT GGT650X-8 brushcutter is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.

For technical support, spare parts, or warranty claims, please contact your authorized GREENCUT dealer or visit the official GREENCUT website for customer service information. Ensure you have your product model number (GGT650X-8) and proof of purchase available when seeking support.