AIBOO Linkable Under Cabinet LED Lighting System User Manual

1. הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. מידע בטיחות חשוב

• בטיחות חשמל: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
• אין תקע קיר: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
• שימוש פנימי בלבד: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
• אוורור: Ensure adequate ventilation around the LED driver to prevent overheating.
• תאימות רכיבים: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. תכולת החבילה

ודא שכל הפריטים המפורטים להלן כלולים בחבילה שלך:

• LED Puck Lights (6 units)
• RF Wireless Remote Control (1 unit)
• LED Controller (1 unit)
• 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
• 5ft Extension Cords (2 units)
• 6-Way Splitter (1 unit)
• Mounting Stickers (12 units)
• ברגי הרכבה (12 יחידות)

4. מפרט מוצר

5. התקנה והתקנה

Before beginning installation, ensure the main power supply to the installation area is turned off at the circuit breaker.

5.1 תרשים חיווט מעלview

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

1. כבה את החשמל במפסק הראשי.
2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
3. Secure all connections with appropriate wire connectors.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

חיבור סדרה 5.3.1

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the first puck light to the LED controller.
3. Connect the subsequent puck lights to each other using their integrated cables.
4. Use extension cords if additional length is required between lights.

5.3.2 חיבור מקביל

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the 6-way splitter to the LED controller.
3. Connect individual puck lights to the available ports on the 6-way splitter.
4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

1. הכנת פני השטח: ודא שמשטח ההרכבה נקי, יבש וחלק.
2. הרכבה דבק: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
3. הרכבת בורג: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. הוראות הפעלה

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 פונקציות שלט רחוק

• הפעלה/כיבוי: הקש על ON כפתור להדלקת האורות, ואת כבוי כפתור כדי לכבות אותם.
• התאמת בהירות:
  • לִלְחוֹץ LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
  • השתמש ב- 100%, 50%, 25% buttons for quick brightness presets.
• צִמוּד: To pair the remote with the controller, press the זוּג button within 5 seconds of powering on the lights until the lights flicker.
• Decoding (1 to More Pair): To pair one remote with multiple controllers, press the לְפַעֲנֵחַ button within 5 seconds of powering on the lights until the lights flicker.
• פונקציות תזמון: לִלְחוֹץ 1H, 2H, 4H, או 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

7. תחזוקה

The AIBOO LED Lighting System requires minimal maintenance.

• ניקוי: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• בְּדִיקָה: Periodically check all connections for tightness and inspect cables for any signs of damage.
• החלפת סוללה: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. פתרון תקלות

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

9. מידע על אחריות

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webאתר. שמור את קבלת הרכישה כהוכחת קנייה עבור כל תביעת אחריות.

10. תמיכת לקוחות

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

• U.S. Live Customer Support: ימים שני עד שישי, 9:00 עד 17:00 (שעון EST)
• משאבים מקוונים: בקר ב AIBOO Store on Amazon למידע נוסף על המוצר ותמיכה.