Stelpro Uniwatt UHC2002WCW Convector Heater User Manual

1. מידע בטיחות

הוראות בטיחות חשובות:

• Protect the unit with appropriate circuit breakers or fuses according to the nameplate.
• ודא שנפח האספקהtage (וולט) תואם לזה שמצוין על לוחית השם.
• יחידה זו חייבת להיות מוארקת. השתמש במוליכי נחושת בלבד.
• השתמש בכבלי חשמל המתאימים ל-75°C (167°F).
• כבה את אספקת החשמל ליחידה במפסק/נתיך לפני התקנה, תיקון וניקוי.
• Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
• קיבולת חימום מומלצת: 1.25 ואט/רגל מעוקב (0.03 מ"ר).

2. המוצר נגמרview

The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.

תכונות עיקריות:

• קיבולת חימום: 2000W (240V) / 1500W (208V), suitable for large rooms.
• לִשְׁלוֹט: Requires an external wall thermostat (sold separately).
• פעולה שקטה: Engineered for minimal noise.
• לְעַצֵב: Sleek, modern look with rounded corners and a durable steel cabinet.
• הַתקָנָה: Designed for surface mounting with a concealed bracket.
• חוֹמֶר: 22-gauge steel front and cabinet.
• תכונה מיוחדת: Cool Touch Exterior.

רכיבי מוצרים:

This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.

א מפורט view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.

תמונה זו מציגה את הצד המקצועיfile of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.

An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.

3. התקנה והתקנה

This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.

3.1 Determining Heating Requirements:

Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).

This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.

3.2 התקנת גוף החימום:

The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.

This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.

This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.

3.3 חיבור לחשמל:

This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.

A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.

Video: Stelpro SOR1 High-End Convector Overview

4. תפעול

The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.

4.1 וואטtage הגדרות:

The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.

This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.

4.2 Thermostat Control:

Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.

5. תחזוקה

Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.

• ניקוי: נגבו מעת לעת את החלק החיצוני בעזרת מטלית רכהamp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
• הסרת אבק: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
• בְּדִיקָה: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.

6. פתרון תקלות

If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.

7. מפרטים

8. אחריות ותמיכה

Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webאתר או צרו קשר עם מחלקת שירות הלקוחות שלהם. שמרו את קבלת הרכישה שלכם לצורך תביעות אחריות.

This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.