APOLLO APXV3434 3/4 Inch PEX Brass Ball Valve User Manual

1. הקדמה

The APOLLO APXV3434 is a 3/4 inch PEX Brass Ball Valve designed for reliable flow control in plumbing systems. This quarter-turn valve is suitable for both new construction and remodeling projects, offering quick and secure connections without the need for flames, glues, fluxes, or solvents.

תכונות עיקריות:

• 3/4 inch diameter for standard PEX pipe applications.
• Designed for use with Apollo PEX pipe.
• Provides quick and mess-free connections.
• מבנה גוף פליז לעמידות.
• NSF Approved and meets ASTM F1807 standards.

2. מידע בטיחות

אנא קראו והבינו את כל ההוראות לפני ההתקנה וההפעלה. אי ביצוע הוראות אלה עלול לגרום נזק לרכוש, פגיעה גופנית או מוות.

• יש ללבוש תמיד ציוד מגן אישי (PPE) מתאים, כולל משקפי מגן וכפפות, במהלך ההתקנה.
• Ensure the water supply is turned off and the system is depressurized before beginning any installation or maintenance.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (California Proposition 65 Warning). Wash hands after handling.
• Do not use this valve for applications exceeding its specified temperature and pressure ratings (32 - 180°F).

3. התקנה והתקנה

This valve is designed for crimp-style PEX connections. Ensure you have the correct PEX crimping tools and PEX pipe for a secure installation.

3.1. הכנה

1. Turn off the main water supply to the area where the valve will be installed.
2. רוקנו את המים מהצינורות כדי להקל על הלחץ.
3. Gather all necessary tools: PEX pipe cutter, PEX crimping tool, PEX crimp rings, and Apollo PEX pipe.
4. Inspect the valve for any visible damage before installation.

3.2. שלבי התקנה

1. Cut the PEX pipe to the desired length using a PEX pipe cutter, ensuring a clean, square cut.
2. Slide a PEX crimp ring onto the PEX pipe.
3. Insert the PEX pipe fully onto the valve's PEX barb fitting. Ensure the pipe is seated against the shoulder of the fitting.
4. Position the crimp ring over the barb fitting, approximately 1/8 inch from the end of the pipe.
5. Using the PEX crimping tool, crimp the ring firmly. Ensure the crimp is complete and secure according to the crimping tool manufacturer's instructions.
6. Repeat the process for the other side of the valve.
7. Once both connections are made, slowly turn on the water supply and check for leaks.

Figure 1: APOLLO 3/4 Inch PEX Brass Ball Valve. This image shows the valve with its white handle in the closed position, ready for PEX pipe connections on both ends.

Figure 2: APOLLO 3/4 Inch PEX Brass Ball Valve, showing the NSF approval marking on the handle. The valve is depicted with its PEX crimp connections.

4. הוראות הפעלה

The APOLLO APXV3434 is a quarter-turn ball valve, meaning it requires only a 90-degree rotation of the handle to fully open or close the flow.

• כדי לפתוח את השסתום: Rotate the handle so it is parallel with the direction of the pipe. This allows full flow through the valve.
• כדי לסגור את השסתום: Rotate the handle 90 degrees so it is perpendicular to the direction of the pipe. This stops the flow completely.

5. תחזוקה

The APOLLO APXV3434 ball valve is designed for long-term, maintenance-free operation under normal conditions. However, periodic inspection is recommended.

• בדיקה שנתית: Visually inspect the valve and connections for any signs of leaks, corrosion, or damage.
• בדיקת פעולה: Periodically operate the valve (open and close it fully) to ensure smooth movement and prevent seizing, especially in systems that remain open or closed for extended periods.
• ניקוי: If necessary, clean the exterior of the valve with a mild detergent and water. Do not use harsh chemicals or abrasive cleaners.

6. פתרון תקלות

Most issues with ball valves are related to improper installation or extreme operating conditions.

• דליפה בחיבורים: Ensure PEX crimp rings are properly seated and crimped. Re-crimp if necessary, or replace the crimp ring and re-crimp. Verify the PEX pipe is fully inserted onto the barb fitting.
• קושי בסיבוב הידית: If the valve handle is stiff, it may be due to mineral buildup or infrequent use. Operating the valve several times may free it. If it remains stiff or seizes, the valve may need replacement.
• זרימה מופחתת: Check for obstructions in the pipe system upstream or downstream of the valve. Ensure the valve is fully open (handle parallel to the pipe).

7. מפרטים

8. אחריות ותמיכה

For specific warranty information or technical support regarding your APOLLO APXV3434 3/4 Inch PEX Brass Ball Valve, please contact APOLLO customer service directly. Refer to the product packaging or the official APOLLO webבאתר לקבלת פרטי הקשר ותנאי האחריות העדכניים ביותר.