מדריך הוראות למערכת טלוויזיה LCD בעלת קיבולת גדולה LUXOR FP4000, בעלת גובה מתכוונן

מָבוֹא

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

The LUXOR FP4000 is designed to accommodate large flat-panel TVs from 40" to 80", supporting up to 200 lbs. It features adjustable viewing heights, an integrated cable management system, a convenient accessory shelf, and mobile casters with locking brakes for versatile display solutions.

מידע בטיחות

• ודא שכל הרכיבים קיימים ולא ניזוקו לפני ההרכבה.
• Do not exceed the maximum weight capacity of 200 lbs for the TV mount and 25 lbs for the accessory shelf.
• Always use two or more people for assembly and moving the stand with a TV mounted.
• Ensure all screws are securely tightened before use. Do not overtighten.
• Engage the locking brakes on all casters when the stand is in a stationary position.
• הרחק ילדים וחיות מחמד מאזור ההרכבה.
• השלך את חומרי האריזה בצורה אחראית.

תוכן החבילה

Please verify that all parts are included in your package. If any parts are missing or damaged, contact Luxor customer support.

• Base Assembly with Casters
• Vertical Support Columns (2)
• תושבת הרכבה לטלוויזיה
• מדף אביזרים
• Hardware Kit (screws, washers, tools)
• מדריך הוראות

תמונה: מעלview of the LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand, showing its main components including the base, vertical columns, TV mount, and accessory shelf.

התקנה והרכבה

יש לבצע את השלבים הבאים בקפידה להרכבה נכונה. מומלץ להרכיב לפחות שני אנשים.

Step 1: Attach Vertical Support Columns to Base

1. Place the base assembly on a flat, stable surface.
2. Align the vertical support columns with the mounting points on the base.
3. Secure the columns using the provided screws and tools. Ensure they are firmly attached.

תמונה: א view of the TV stand during assembly, showing the vertical support columns being attached to the mobile base. This image highlights the structural connection points.

Step 2: Install TV Mounting Bracket

1. Attach the TV mounting bracket to the top of the vertical support columns.
2. Use the designated screws and ensure the bracket is level and secure.
3. Refer to your TV's manual for specific VESA mounting patterns and screw sizes.

Image: The TV stand with the mounting bracket installed at the top of the vertical columns, ready to receive a television. This shows the upper part of the stand.

Step 3: Attach Accessory Shelf

1. Position the accessory shelf at your desired height on the vertical support columns.
2. Secure the shelf using the provided hardware. Ensure it is level and stable.

Image: The LUXOR FP4000 TV Stand with the accessory shelf attached to the vertical columns, positioned below the TV mounting bracket. This illustrates the shelf's placement.

שלב 4: התקנת הטלוויזיה

1. Carefully lift your television and align its VESA mounting holes with the bracket on the stand.
2. Secure the TV to the bracket using the appropriate screws and spacers from the hardware kit.
3. Ensure the TV is securely fastened and level before releasinז זה.

Image: A fully assembled LUXOR FP4000 TV Stand, viewed from the front, with a television mounted on its bracket and the accessory shelf in place. This shows the complete product.

הוראות הפעלה

כוונון גובה הטלוויזיה

The TV mounting bracket can be adjusted in 2-inch increments from 48" to 65" (measured from the floor to the center of the TV). To adjust the height:

1. With two people, carefully lift the TV slightly to relieve pressure on the locking pins.
2. Locate the height adjustment pins on the vertical columns.
3. Pull out the pins, adjust the TV to the desired height, and re-insert the pins securely into the corresponding holes.
4. Ensure both sides are adjusted to the same height and pins are fully engaged before releasinהטלוויזיה.

הזזת המעמד

The stand is equipped with four 3" full-swivel casters for mobility.

• To move the stand, ensure all caster brakes are disengaged.
• Push the stand carefully to its new location. Avoid sudden movements or pushing over uneven surfaces.
• Once in the desired position, engage the locking brakes on all four casters to secure the stand.

ניהול כבלים

Utilize the integrated cable management system within the steel columns to keep cables organized and out of sight. Route TV and accessory cables through the designated openings in the columns for a clean and professional appearance.

תַחזוּקָה

• ניקוי: נגב משטחים עם רך, דamp מטלית. הימנעו מחומרי ניקוי שוחקים או ממסים.
• בדיקת חומרה: בדקו מעת לעת את כל הברגים והברגים כדי לוודא שהם נשארים מהודקים היטב. הדקו מחדש במידת הצורך.
• בדיקת גלגלים: Inspect casters for debris or damage. Clean as needed to ensure smooth operation.
• מגבלות משקל: Always adhere to the specified weight limits for the TV and accessory shelf.

פתרון בעיות

מפרטים

• דֶגֶם: FP4000
• מותג: לוקסור
• חוֹמֶר: סגסוגת פלדה
• צֶבַע: שָׁחוֹר
• גדלי טלוויזיה תואמים: טלוויזיות שטוחות בגודל 40 אינץ' עד 80 אינץ'
• משקל מקסימלי לטלוויזיה: 200 פאונד
• מידות מעמד: 39.25"W x 28.25"D x 48" to 65"H (adjustable in 2" increments)
• Accessory Shelf Dimensions: רוחב 19.625 אינץ' x עומק 11 אינץ'
• Accessory Shelf Weight Capacity: 25 פאונד
• גלגלים: Four 3" full-swivel casters, all with locking brakes
• סוג הרכבה: מתכוונן
• UPC: 847210034896

Image: The LUXOR FP4000 TV Stand, illustrating its overall dimensions and key features. This image provides a visual reference for the product's size and design.

אחריות ותמיכה

For warranty information, technical support, or to order replacement parts, please contact Luxor customer service. Refer to the official Luxor webאתר האינטרנט לקבלת פרטי הקשר ומדיניות האחריות העדכניים ביותר.

Luxor Customer Service: Visit Luxor Contact Us Page

Please have your model number (FP4000) and purchase date available when contacting support.