1. הקדמה
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.
2. הוראות בטיחות
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
- קרא את כל ההוראות: Familiarize yourself with the tool's controls and proper use.
- ללבוש הגנה לעיניים: הרכיבו תמיד משקפי בטיחות או משקפי בטיחות עם מגני צד.
- יש ללבוש הגנה על השמיעה: השתמשו באטמי אוזניים או אטמי אוזניים במהלך הפעולה.
- חומר עבודה מאובטח: תמיד clamp או לאבטח את חומר העבודה בדרך אחרת כדי למנוע תזוזה במהלך החיתוך.
- שמור על ידיים נקיות: Never place hands near the cutting blade.
- לשמור על אזור עבודה נקי: אזורים עמוסים מזמנים תאונות.
- אל תפעל באטמוספירות נפיצות: אין להשתמש בכלים חשמליים בנוכחות נוזלים או גזים דליקים.
- נתק לפני כוונון: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
- Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
- הימנע מהשגת יתר: שמרו על דריסת רגל ושיווי משקל נאותים בכל עת.
3. המוצר נגמרview
The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.
איור 1: מֵעַלview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.
מרכיבי מפתח:
- Aluminum Base and Upper Table: מספק יציבות ועמידות.
- Electronic Variator: Allows adjustment of blade speed.
- מנגנון הטיה: Enables bevel cuts up to 45°.
- Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
- יציאת שאיבת אבק: For connecting a dust collection system.
4. התקנה
Before operating the miter saw, ensure it is properly set up and secured.
- פריקת אריזה: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
- הַרכָּבָה: Securely mount the miter saw to a stable workbench using appropriate fasteners.
- התקנת להב: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
- Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
- הוצאת אבק: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.
5. הוראות הפעלה
The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.
5.1. בקרת עוצמה ומהירות
- The saw operates at 1600W power.
- Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.
5.2. ביצוע קיצוצים
- Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
- Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
- Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
- Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
- General Cutting Capacity:
- 90° (Straight): 155 x 25 mm / 65 x 77 mm
- 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
- 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
- 45° Compound (Miter & Bevel): 75 x 20 mm
- מִבצָע: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.
6. תחזוקה
Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.
- ניקוי: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
- בדיקת להב: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
- בדיקת מברשות: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
- סִיכָה: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
- בדיקת מחבר: בדקו מעת לעת את כל האומים, הברגים והברגים היטב. הדקו את כל המחברים הרופפים.
7. פתרון תקלות
סעיף זה מטפל בבעיות נפוצות שאתם עשויים להיתקל בהן עם מסור זווית שלכם.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| המסור לא מתחיל | אין ספק כוח; מתג תקול; מברשות פחמן שחוקות. | Check power connection and circuit breaker. Test switch. Inspect and replace carbon brushes if necessary. |
| רטט או רעש מוגזמים | Loose blade; damaged blade; loose mounting bolts; worn bearings. | Tighten blade nut. Replace damaged blade. Tighten mounting bolts. Contact service for bearing replacement. |
| להב נתקע בחומר העבודה | Dull blade; improper feed rate; workpiece not secured; incorrect blade for material. | Replace or sharpen blade. Reduce feed rate. Secure workpiece firmly. Use appropriate blade type. |
| חיתוכים לא מדויקים | Fence or table not properly aligned; loose components. | Check and adjust fence and table alignment. Tighten all adjustable components. |
8. מפרטים
Technical specifications for the Stayer SCE 1650 WMC Miter Saw:
- דֶגֶם: SCE1650WMC
- כּוֹחַ: 1600 W
- כרך ידtage: 230 וולט (AC)
- מהירות ללא עומס: 2500 – 4000 RPM (Giri/min)
- קוטר להב: Ø 254 מ"מ
- קדח להב: 30 מ"מ
- חומר להב: Tungsten Carbide (Widia TCT Z-52)
- מקור כוח: חשמלי עם כבלים
- מִשׁקָל: 16.5 ק"ג
- Cutting Capacity (Max):
- 90° (Straight): 155 x 25 mm / 65 x 77 mm
- 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
- 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
- 45° Compound (Miter & Bevel): 75 x 20 mm
9. אחריות
STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER webבאתר לקבלת תנאי האחריות המפורטים. שמור את הוכחת הרכישה שלך לצורך תביעות אחריות.
10. תמיכה
For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.
Webאֲתַר: www.stayer.es (לְשֶׁעָבַרampלה, בפועל URL עשוי להשתנות)