HOTONE TANLA1

Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp מדריך למשתמש ראש

Model: TANLA1 | Brand: HOTONE

1. הקדמה

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

תכונות עיקריות:

  • Ultra-compact, portable ampראש ליפר.
  • Inspired by the legendary Vox AC30 amplifier tone.
  • Separate Volume and Gain control knobs.
  • 3-band EQ (Bass, Middle, Treble) for tone shaping.
  • Integrated FX Loop for external effects integration.

2. הוראות בטיחות

  • ספק כוח: Use only the specified 18V DC power adapter (center negative). Incorrect voltagזה עלול לגרום נזק ליחידה.
  • אוורור: יש לוודא אוורור נאות. אין לחסום פתחי אוורור.
  • לַחוּת: הרחק את היחידה ממים או מלחות מוגזמת.
  • חוֹם: הימנע מהצבת היחידה ליד מקורות חום או באור שמש ישיר.
  • ניקוי: נקה רק עם מטלית יבשה.
  • שֵׁרוּת: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.

3. המוצר נגמרview

Hotone Nano Legacy British Invasion Ampראש ליפיר

תְמוּנָה: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp ראש, מופעasing its compact size and overall design.

פקדי לוח קדמי:

Hotone Nano Legacy British Invasion Front Panel Diagram

תְמוּנָה: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

  1. קֶלֶט: 1/4" mono jack for connecting your guitar.
  2. בַּס: Controls the low frequency response of your tone.
  3. אֶמצַע: Controls the mid frequency response of your tone.
  4. לְשַׁלֵשׁ: Controls the high frequency response of your tone.
  5. לְהַשִׂיג: Controls the pre-amp gain level, affecting distortion and sustain.
  6. נפח: שולט בנפח הפלט הכולל של ה- ampחיים יותר.
  7. מתג הדלק / כבה: מפעיל או מכבה את היחידה.

חיבורי לוח אחורי:

Hotone Nano Legacy British Invasion Rear Panel Diagram

תְמוּנָה: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

  1. 18V DC: Power input for the included 18V DC adapter (center negative).
  2. פלט טלפונים/קו: 1/8" stereo jack for headphones or direct recording.
  3. AUX IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
  4. החזרת לולאת FX: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
  5. פלט רמקול: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
  6. שליחת לולאת FX: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. הגדרה וחיבורים

  1. חיבור חשמל: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
  2. חיבור גיטרה: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
  3. חיבור רמקול: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. אַזהָרָה: אל תפעיל את amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
  4. Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
  5. AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
  6. לולאת אפקטים (אופציונלי): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. הוראות הפעלה

  1. הפעלה: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
  2. הגדרות ראשונות: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
  3. התאמת רווח: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
  4. כוונון עוצמת הקול: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
  5. עיצוב צלילים עם EQ:
    • בַּס: Adjust for low-end warmth and fullness.
    • אֶמצַע: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
    • לְשַׁלֵשׁ: Adjust for brightness and clarity.
  6. כיבוי: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. תחזוקה

  • ניקוי: השתמש במטלית רכה ויבשה כדי לנקות את החלק החיצוני של amplifier. Do not use liquid cleaners, aerosols, or solvents.
  • אִחסוּן: אחסן את ampיש לאחסן את המכשיר במקום קריר ויבש, הרחק מאור שמש ישיר וטמפרטורות קיצוניות.
  • הוֹבָלָה: בעת ההובלה, יש לוודא ש ampה-lifier ארוז היטב כדי למנוע נזק פיזי.
  • טיפול בכבלים: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. פתרון תקלות

בְּעָיָהסיבה אפשריתפִּתָרוֹן
אין פלט קול
  • החשמל לא מחובר או מופעל.
  • Guitar cable faulty or not fully inserted.
  • Speaker cable faulty or not fully inserted.
  • אי התאמה בעכבת הרמקול.
  • Volume/Gain knobs set to minimum.
  • Headphones connected to PHONES/LINE OUT.
  • Check power connection and ON/OFF switch.
  • Ensure guitar cable is secure and functional.
  • Ensure speaker cable is secure and functional.
  • Verify speaker impedance is 4-16Ω.
  • Increase Volume and Gain.
  • Disconnect headphones if using speaker output.
זמזום או רעש מוגזמים
  • Faulty power supply or ground loop.
  • הגדרות הגבר גבוהות.
  • הפרעות ממכשירים אלקטרוניים אחרים.
  • Single-coil pickups (inherently more susceptible to hum).
  • Try a different power outlet or a high-quality isolated power supply.
  • הפחת את הגדרות ההגבר.
  • מַהֲלָך ampהרחק ממוצרי אלקטרוניקה אחרים.
  • Consider using humbucker pickups or a noise gate pedal.
צליל מעוות או חלש
  • כבלים לא תקינים.
  • Incorrect speaker connection.
  • רמקול פגום.
  • אות הקלט חם מדי.
  • בדוק והחלף כבלים במידת הצורך.
  • Ensure speaker cable is correctly connected and speaker impedance is correct.
  • Test with a different speaker if possible.
  • Reduce output from guitar or preceding pedals.

8. מפרטים

דֶגֶם:TANLA1
פלט וואטtage:5 וואט
מקור כוח:חשמלי עם חוט (18V DC, מרכז שלילי)
מכשירים תואמים:גִיטָרָה
סוג מחבר:1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
משקל פריט:15.5 אונקיות (כ-440 גרם)
מידות המוצר:2.34 x 5.03 x 2.95 אינץ' (כ-5.9 x 12.8 x 7.5 ס"מ)
סוג חומר:נירוסטה
צֶבַע:שָׁחוֹר

9. מידע על אחריות

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webאתר. שמור את הוכחת הרכישה שלך לצורך תביעות אחריות.

10. תמיכת לקוחות

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webאֲתַר.

Visit Hotone Audio Support Page (לְשֶׁעָבַרampהקישור, הקישור בפועל עשוי להשתנות)

© 2024 HOTONE. כל הזכויות שמורות.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.