Hager 4500 Series Grade 1 Heavy Duty Fire Rated Rim Type Exit Device

מָבוֹא

This manual provides instructions for the proper installation, operation, and maintenance of the Hager 4500 Series Grade 1 Heavy Duty Fire Rated Rim Type Exit Device. This device is engineered for superior performance and meets stringent safety and performance standards, including BHMA Grade 1 certification and UL listing for fire-rated applications.

מידע בטיחות

• יש להקפיד תמיד על חוקי הבנייה ותקנות הבטיחות המקומיות במהלך ההתקנה.
• Ensure all components are securely fastened before operation to prevent malfunction.
• This device is intended for use as panic hardware and in fire-rated applications. Do not modify the device or its components.
• יש ללבוש ציוד מגן אישי (PPE) מתאים, כגון משקפי מגן וכפפות, במהלך ההתקנה.
• הרחק ילדים וצוות לא מורשה מאזור ההתקנה.

תוכן החבילה

The Hager 4500 Series Rim Type Exit Device package typically includes:

• Hager 4500 Series Rim Type Exit Device (main assembly)
• Installation Hardware (screws, fasteners)
• Installation Template (for precise marking)
• מדריך הוראות (מסמך זה)

Image: Main components of the Hager 4500 Series Rim Type Exit Device, showing the push bar, housing, and mounting hardware. This image illustrates the primary parts included in the package.

התקנה והתקנה

Proper installation is crucial for the safe and effective operation of the exit device. Refer to the included installation template for precise measurements and drilling instructions specific to your door type.

כלים נדרשים

• מקדחים ומקדחים מתאימים
• מברגים (פיליפס ופלטהד)
• סרט מדידה
• עיפרון או מרקר
• משקפי בטיחות

שלבי התקנה

1. הכן את הדלת: Mark the center line of the door and the desired height for the exit device. Use the provided template to accurately mark all drilling locations for the device body and strike plate on both the door and frame.

2. Mount the Device Body: Drill pilot holes as marked on the door. Secure the main body of the exit device to the door using the provided screws. Ensure the device is level and flush against the door surface for optimal performance.

3. התקן את לוחית ההגנה: Position the strike plate on the door frame, aligning it precisely with the latch bolt of the exit device. Mark and drill pilot holes, then secure the strike plate with the appropriate screws.

4. Connect Exterior Trim (if applicable): If an exterior trim (e.g., lever, pull, or key cylinder) is being installed, follow its specific instructions to connect it to the internal mechanism of the exit device. Ensure proper engagement and function.

5. פעולת בדיקה: Close the door and depress the push bar firmly. Verify that the latch bolt retracts smoothly and fully, allowing the door to open freely. Check for any binding, resistance, or improper latching.

6. התאמות: Make any necessary fine adjustments to the strike plate or device body to ensure perfect alignment and consistently smooth operation. All screws should be tightened securely, but not overtightened.

הוראות הפעלה

The Hager 4500 Series Rim Type Exit Device is designed for intuitive and reliable emergency egress.

To Exit (Egress)

1. Depress Push Bar: Apply firm, even pressure to the push bar located across the width of the door.

2. דלת פתוחה: As the push bar is depressed, the internal mechanism will retract the latch bolt, allowing the door to swing open outwards.

To Enter (Ingress, with exterior trim)

1. Use Exterior Trim: If an exterior trim with a lever, knob, or key cylinder is installed, operate it according to its specific instructions (e.g., turn lever, insert key) to retract the latch bolt.

2. דלת פתוחה: Push or pull the door open once the latch bolt is retracted.

תַחזוּקָה

Regular maintenance ensures the longevity, reliability, and continued compliance of your Hager 4500 Series Exit Device.

• ניקוי: Clean the device surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents that may damage the finish or internal components.

• סִיכָה: Periodically (e.g., annually or semi-annually, depending on usage) apply a small amount of silicone-based lubricant to moving parts, such as the latch bolt and internal mechanisms. Do not over-lubricate, as this can attract dirt.

• בְּדִיקָה: Annually inspect all mounting screws for tightness. Check the push bar for any signs of damage, bending, or excessive wear. Ensure the latch bolt retracts fully and smoothly without obstruction. Verify that the device operates freely and returns to its original position.

• תאימות דלתות אש: For devices installed on fire-rated doors, it is critical to ensure that no modifications are made to the device or door that would compromise its fire rating. Any repairs or replacements must use approved components.

פתרון בעיות

This section addresses common issues you might encounter with your exit device.

מפרטים

• דֶגֶם: 158103
• סִדרָה: סדרת 4500
• סוּג: Rim Type Exit Device
• מֶשֶׁך: 36 אינץ'
• סִיוּם: ברונזה משופשפת בשמן
• חוֹמֶר: AL/Stainless Steel/Zinc
• צִיוּן: BHMA Certified ANSI A156.3 Grade 1
• דירוג אש: UL/cUL Listed up to 3 Hours for "A" labeled doors
• Panic Listing: UL305 Listed for panic hardware
• Windstorm Resistance: ANSI A250.13 Severe Windstorm Resistant Component
• נְגִישׁוּת: Complies with ANSI A117.7 for accessible buildings
• מידות המוצר: 36 x 10 x 5 אינץ'
• משקל פריט: 13 פאונד
• רכיבים כלולים: חומרת התקנה

מידע על אחריות

The Hager 4500 Series exit device is backed by a אחריות לכל החיים, providing assurance of quality and durability from the manufacturer to the building owner. For detailed warranty terms, conditions, and claim procedures, please refer to the official Hager Companies warranty documentation or contact Hager customer support directly.

תמיכת לקוחות

For technical assistance, replacement parts, or warranty claims, please contact Hager Companies directly.

יַצרָן: Hager Companies

Webאֲתַר: www.hagerco.com

טֵלֵפוֹן: Please refer to the Hager Companies official website for the most current contact numbers and support options.