MEAN WELL MDR-60-24

MEAN WELL MDR-60-24 DIN Rail Power Supply User Manual

1. הקדמה

This manual provides essential information for the safe and efficient operation of the MEAN WELL MDR-60-24 DIN Rail Power Supply. The MDR-60-24 is an industrial-grade switching power supply designed for reliable 24V DC power delivery in various applications.

תכונות עיקריות:

  • 60W output power (24V at 2.5A continuous current).
  • High efficiency (87% typical).
  • Universal 85-264VAC / 120-370VDC input voltage תאימות.
  • תפוקה מתכווננת כרךtagטווח e (24V עד 30V).
  • Over-vol מובנהtage, over-load, short-circuit, and over-temperature protection.
  • Compact metal housing with IP20 protection.
  • DIN rail mountable for easy installation.
  • Safety-certified with CE, RoHS, and UL60950-1 compliance.

2. מידע בטיחות

קרא בעיון את כל ההוראות לפני ההתקנה וההפעלה. אי ביצוע הוראות אלה עלול לגרום להתחשמלות, שריפה או פציעה חמורה.

  • סכנה חשמלית: Ensure power is disconnected before installation or maintenance. Only qualified personnel should perform electrical connections.
  • אוורור: ודאו זרימת אוויר מספקת סביב היחידה כדי למנוע התחממות יתר. אין לחסום פתחי אוורור.
  • סְבִיבָה: Install in a dry, well-ventilated area, free from excessive dust, moisture, and corrosive substances. Operate within specified temperature and humidity ranges.
  • הַאֲרָקָה: Proper grounding is essential for safety. Connect the protective earth (PE) terminal to a reliable ground.
  • עומס תפוקה: Do not exceed the rated output power. Overloading can damage the unit and pose a fire risk.
  • כרך ידtage התאמה: התאם את עוצמת הפלטtage only when the unit is powered on and under no load, using a suitable insulated tool.

3. התקנה והתקנה

The MDR-60-24 is designed for DIN rail mounting (TS-35/7.5 or TS-35/15). Follow these steps for installation:

3.1 הרכבה

  1. Ensure the DIN rail is securely installed in a suitable enclosure.
  2. חבר את הקצה העליון של ספק הכוח למסילת ה-DIN.
  3. Push the bottom of the power supply firmly until it clicks into place on the DIN rail.
  4. Verify the unit is securely attached and cannot be easily dislodged.
MEAN WELL MDR-60-24 DIN Rail Power Supply showing the DIN rail clip

Image: Top-angled view of the MDR-60-24 power supply, highlighting the integrated DIN rail mounting clip at the bottom for secure installation on a standard DIN rail.

3.2 חיבורי חיווט

All connections are made via screw terminals. Refer to the labels on the unit for correct terminal identification.

MEAN WELL MDR-60-24 Power Supply front view with terminal labels

תמונה: חזית view of the MDR-60-24 power supply, clearly showing the input (L, N, PE) and output (+V, -V) screw terminals, along with the DC OK indicator and voltagפוטנציומטר התאמה e.

  1. Input (AC/DC): Connect the AC input (Line, Neutral) or DC input to the "L" and "N" terminals. Connect the protective earth to the "PE" terminal. Ensure correct polarity for DC input.
  2. פלט (DC): Connect the positive load wire to the "+V" terminal and the negative load wire to the "-V" terminal.
  3. הדקו את הדקים: Ensure all screw terminals are tightened securely to prevent loose connections and potential hazards.

פֶּתֶק: Use appropriate wire gauges for the current rating to avoid overheating.

4. הוראות הפעלה

4.1 הפעלה/כיבוי

  • Once all connections are secure, apply input power to the unit.
  • The "DC OK" indicator LED will illuminate when the output voltage נמצא בטווח שצוין.
  • To power off, disconnect the input power.

4.2 פלט כרךtagה התאמה

התפוקה כרךtage can be adjusted from 24V to 30V using the potentiometer located on the front panel.

  • With the unit powered on and under no load, use a small, insulated screwdriver to carefully turn the "V ADJ" potentiometer.
  • Turn clockwise to increase the voltage, counter-clockwise to decrease.
  • עקוב אחר נפח הפלטtage with a multimeter to ensure it is set to the desired level.

5. תחזוקה

The MDR-60-24 power supply is designed for long-term, reliable operation with minimal maintenance. However, periodic checks are recommended:

  • ניקוי: Keep the unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • אוורור: ודא שפתחי האוורור אינם חסומים.
  • חיבורים: Periodically check screw terminals for tightness, especially in environments with vibration.
  • תנאים סביבתיים: ודא שסביבת ההפעלה נשארת בטווחי הטמפרטורה והלחות שצוינו.
MEAN WELL MDR-60-24 Power Supply side view showing ventilation fins

תמונה: צד view of the MDR-60-24 power supply, illustrating the heat dissipation fins designed to maintain optimal operating temperature through passive air cooling.

6. פתרון תקלות

If the power supply is not functioning as expected, refer to the following troubleshooting guide:

בְּעָיָהסיבה אפשריתפִּתָרוֹן
אין פלט כרךtagנורית e / DC אישור כבויהאין כוח כניסה
Input fuse blown
הגנת עומס יתר הופעלה
Short-circuit protection activated
בדוק את מקור מתח הכניסה והחיבורים.
Replace fuse (if accessible and cause identified).
Reduce load. Disconnect and reconnect power.
Check for short circuits in the load. Disconnect and reconnect power.
תפוקה כרךtagנמוך/גבוה מדיכרך ידtage adjustment potentiometer incorrectly set
מצב עומס יתר
Adjust "V ADJ" potentiometer to desired voltage.
הפחת עומס.
Unit shuts down intermittentlyהגנת טמפרטורת יתר הופעלה
Intermittent overload
Ensure adequate ventilation and ambient temperature. Reduce load.
Check load for intermittent spikes or faults.

If the problem persists after following these steps, contact technical support.

7. מפרטים

Detailed technical specifications for the MEAN WELL MDR-60-24 power supply:

  • דֶגֶם: MDR-60-24
  • פלט כרךtage: 24V DC
  • זרם פלט: 2.5A
  • כוח פלט: 60W
  • קלט כרךtagטווח e: 85-264VAC / 120-370VDC
  • יְעִילוּת: 87% (אופייני)
  • אדווה ורעש: <150mVp-p
  • תקנה קו: ±1.0%
  • תקנת עומס: ±1.0%
  • כרך ידtagטווח התאמה: 24V - 30V
  • הֲגָנָה: כרך יתרtage, Over-load, Short-circuit, Over-temperature
  • טמפרטורת הפעלה: -30 מעלות צלזיוס עד +70 מעלות צלזיוס
  • לַחוּת: 20-90% לחות יחסית ללא עיבוי
  • מידות (אורך x רוחב x גובה): 129 מ"מ x 38 מ"מ x 97 מ"מ (5.08 ב x 1.50 ב x 3.82 ב)
  • תקני בטיחות: UL60950-1, TUV EN60950-1, CE, RoHS
  • תקני EMC: EN55032, EN61000-3-2, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11

8. אחריות ותמיכה

MEAN WELL products are manufactured to high-quality standards. For warranty information, please refer to the official MEAN WELL webאתר או צור קשר עם המפיץ המורשה שלך.

For technical assistance or support, please contact your product supplier or visit the MEAN WELL official webאתר למשאבים ופרטי התקשרות.

© 2024 MEAN WELL. כל הזכויות שמורות. המידע עשוי להשתנות ללא הודעה מוקדמת.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.