Pro-Ject RM 1.3 Turntable User Manual

מָבוֹא

This manual provides essential instructions for the setup, operation, and maintenance of your Pro-Ject RM 1.3 Turntable. Please read it thoroughly before use to ensure proper functionality and longevity of your device.

תוכן החבילה

Before proceeding with the setup, please verify that all components are present:

• Pro-Ject RM 1.3 Turntable Unit
• מגש
• חגורת בטיחות
• Outboard 15V AC Motor
• ספק כוח
• Sumiko Pearl Cartridge (pre-installed or separate)
• Removable RCA Cables
• משקל נגד
• משקל נגד החלקה
• מד לחץ סטיילוס

הוראות התקנה

Follow these steps carefully to set up your turntable:

1. פריקת אריזה: הוצא בזהירות את כל הרכיבים מהאריזה. שמור את האריזה להובלה עתידית.
2. התקנת מגש: Place the platter onto the central spindle. Ensure it sits securely and rotates freely.
3. מיקום מנוע: Position the outboard motor unit next to the turntable chassis. The motor pulley should align with the outer rim of the platter.
4. התקנת רצועת הנעה: Gently stretch the drive belt around the motor pulley and the outer rim of the platter. Ensure the belt is not twisted.
5. Cartridge Installation (if not pre-installed): If your Sumiko Pearl cartridge is not pre-installed, carefully attach it to the tonearm headshell using the provided screws. Ensure correct alignment.
6. כוונון משקל נגד: Slide the counterweight onto the rear of the tonearm. Adjust it until the tonearm floats horizontally. Then, set the tracking force according to the cartridge manufacturer's recommendations (typically 1.8g for Sumiko Pearl). Use a stylus pressure gauge for accuracy.
7. Anti-skating Adjustment: Attach the anti-skating weight to the tonearm's anti-skating mechanism. Adjust the setting to match the tracking force.
8. מתחבר ל Ampחיים יותר: Connect the removable RCA cables from the turntable's output to the "Phono" input of your amplifier or a dedicated phono preamplifier. Ensure the ground wire is connected between the turntable and your ampחיים/טרוםampמפחית זמזום כדי למזער אותו.

הוראות הפעלה

1. הפעלה: Connect the power supply to the motor unit and a wall outlet. Press the power button on the motor unit to start the platter rotation.
2. בחר מהירות: Most turntables offer 33 1/3 RPM and 45 RPM. Ensure the correct speed is selected for your record. (Refer to motor unit for speed selection mechanism, typically a switch or belt position change).
3. שיא מקום: Carefully place your vinyl record onto the platter.
4. זרוע תחתונה: Gently lift the tonearm using the cueing lever. Position the stylus over the desired track on the record. Slowly lower the cueing lever to allow the stylus to descend onto the record groove.
5. השמעה: The record will now play. Adjust the volume on your ampחיים יותר.
6. הפסקת השמעה: At the end of the record, or when you wish to stop, use the cueing lever to lift the tonearm from the record. Return the tonearm to its rest and secure it. Press the power button on the motor unit to stop the platter.

תַחזוּקָה

• ניקוי תקליטים: Regularly clean your vinyl records using a dedicated record brush or cleaning solution to remove dust and static.
• טיפול בסטיילוס: Use a soft stylus brush to gently clean the stylus tip before and after each play. Brush from back to front. Avoid touching the stylus with your fingers.
• ניקוי פטיפון: Wipe the turntable chassis and platter with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents.
• בדיקת חגורה: Periodically check the drive belt for wear or stretching. Replace if necessary to maintain accurate playback speed.

פתרון בעיות

אם נתקלתם בבעיות עם הפטיפון שלכם, עיינו בבעיות הנפוצות ובפתרונות הבאות:

מפרטים

אחריות ותמיכה

For warranty information, please refer to the documentation provided with your purchase or visit the official Pro-Ject website. For technical support or service inquiries, please contact your authorized Pro-Ject dealer or the manufacturer's customer service department.

שמור את הוכחת הרכישה שלך לתביעות אחריות.