מָבוֹא
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide Lampאנא קרא/י הוראות אלה בעיון לפני השימוש ושמור/י אותן לעיון עתידי.
The OSRAM HCI-TC 70W/830 WDL G8.5 is a high-performance metal halide lamp featuring POWERBALL ceramic technology and UV filter technology, designed for outdoor use. It provides a warm white light (830 WDL) with a high color rendering index, making it suitable for various lighting applications.
מידע בטיחות חשוב
- סיכון להתחשמלות: Installation and maintenance should only be performed by a qualified electrician. Ensure power is disconnected before handling the lamp.
- סכנת כוויות: Lampפועלים בטמפרטורות גבוהות. אפשרו ל-lamp להתקרר לחלוטין לפני הטיפול.
- קרינת UV: ה-L הזהamp features UV filter technology, but prolonged direct exposure to light from any high-intensity discharge lamp יש להימנע.
- Lamp קֶרַע: להפעיל את lamps only in suitable enclosed luminaires to contain hot particles in case of lamp קֶרַע.
- תאימות נטל: Use only with appropriate electronic or magnetic ballasts designed for metal halide lamps of this wattage and type. Incompatible ballasts can lead to lamp כשל או סכנות בטיחות.
- רְשׁוּת: השלך את lamps according to local regulations, as they may contain mercury.
התקנה והתקנה
בדיקות טרום התקנה
- Verify that the luminaire and ballast are compatible with a 70W G8.5 metal halide lamp.
- Ensure the power supply is disconnected at the circuit breaker before beginning installation.
- בדוק את lamp for any visible damage. Do not install a damaged lamp.
שלבי התקנה
- Ensure the luminaire is clean and free from debris.
- Carefully insert the G8.5 base of the lamp לתוך ה-lamp holder. Ensure it is seated firmly and correctly. Do not force the lamp.
- Close the luminaire cover securely.
- החזר את החשמל למעגל.
Image: The OSRAM HCI-TC 70W/830 WDL G8.5 metal halide lamp, showing its compact design and G8.5 base. This lamp is designed for high-intensity discharge lighting applications.
פֶּתֶק: תמיד לטפל ב-lamp by its base to avoid touching the glass envelope, as oils from skin can reduce lamp חַיִים.
הוראות הפעלה
- הצתה ראשונית: עם ההצתה הראשונה או לאחר הפסקת חשמל, ה-lamp will require a short warm-up period to reach full brightness and stable color.
- זמן חימום: ה- lamp typically reaches full light output within 2-5 minutes after ignition.
- זמן הפעלה חוזרת: אם ה-lamp is switched off, it requires a cooling period before it can be re-ignited. This re-strike time is typically 5-15 minutes, depending on ambient temperature and ballast type. Attempting to re-ignite too soon can damage the lamp או נטל.
- עמדת הפעלה: ה- lamp is designed for operation in any position (h90), but refer to your luminaire's instructions for specific requirements.
תַחזוּקָה
ניקוי
ודא את ה-lamp is cool and power is disconnected before cleaning. Gently wipe the outer glass envelope with a clean, dry, lint-free cloth. Do not use abrasive cleaners or liquids that could leave residues or damage the lamp.
Lamp תַחֲלִיף
החלף את ה-lamp when it reaches the end of its rated average lifespan or if it exhibits signs of failure (e.g., flickering, reduced light output, failure to ignite). Always replace with an OSRAM HCI-TC 70W/830 WDL G8.5 lamp or an equivalent approved by OSRAM.
- נתק את החשמל לגוף התאורה.
- אפשר את ה-lamp להתקרר לחלוטין.
- Open the luminaire and carefully remove the old lamp by gently pulling it straight out from the G8.5 socket.
- התקן את ה-l החדשamp as described in the "Installation Steps" section.
רְשׁוּת
מתכת הליד לamps contain small amounts of mercury and other materials that require special disposal. Do not dispose of lamps in general household waste. Contact your local waste management authority for proper recycling or disposal instructions.
פתרון בעיות
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Lamp does not ignite. | No power supply; incorrect wiring; faulty lamp; faulty ballast; lamp not seated correctly. | Check power supply and circuit breaker. Verify wiring. Re-seat lamp. Test with a known good lamp or ballast (if safe to do so). Consult a qualified electrician. |
| Lamp מהבהב או מדליק/כבה מחזורית. | סוף לamp life; incorrect ballast; unstable power supply; overheating luminaire. | החלף את lamp. Ensure ballast is compatible. Check power supply stability. Ensure proper ventilation for the luminaire. |
| תפוקת אור מופחתת. | סוף לamp life; dirty lamp or luminaire reflector; incorrect ballast. | החלף את lamp. Clean lamp and luminaire. Verify ballast compatibility. |
| Lamp takes too long to re-ignite. | Insufficient cooling time; faulty ignitor/ballast. | Allow adequate cooling time (5-15 minutes). Consult a qualified electrician to check ignitor/ballast. |
מפרטים
| מותג | OSRAM |
| מספר דגם | HCI-TC 70W/830 WDL G8.5 (Internal: 4008321681799, 999017835046) |
| סוג אור | Metal Halide |
| מהtage | 70 וואט |
| כרך ידtage | 96 וולט |
| צבע בהיר | Warm White (830 WDL) |
| אינדקס עיבוד צבע (CRI) | 89 |
| שימוש בפנים/חוץ | בָּחוּץ |
| סוג חומר | קרמיקה, מתכת |
| סוג בסיס | G8.5 |
| תוחלת חיים ממוצעת | 15,000 hours (with electronic ballast); 12,000 hours (with magnetic ballast) |
| משקל פריט | 9 גרם |
מידע על אחריות
OSRAM products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your region and product, please refer to the official OSRAM website or contact OSRAM customer service. Keep your proof of purchase for warranty claims.
תמיכת לקוחות
If you have any questions, require technical assistance, or need further support regarding your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide Lamp, please visit the official OSRAM website or contact their customer service department. Contact information can typically be found on the OSRAM webאתר או אריזת מוצר.
אוסרם רשמי Webאֲתַר: www.osram.com
