Samson Auro D208 8-Inch Active Loudspeaker

מָבוֹא

This manual provides essential information for the proper setup, operation, and maintenance of your Samson Auro D208 8-Inch Active Loudspeaker. Please read these instructions thoroughly before using the product to ensure optimal performance and safety.

מידע בטיחות

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, or injury. Keep the loudspeaker away from water and moisture. Do not block ventilation openings. Refer all servicing to qualified personnel.

תוכן החבילה

ודא שהחבילה שלך מכילה את הפריטים הבאים:

• Samson Auro D208 8-Inch Active Loudspeaker
• כבל חשמל
• מדריך למשתמש

הגדרה

מיקום

The Auro D208 is designed for versatile placement. It can be used as a main PA speaker, a floor monitor, or mounted on a standard 1 3/8-inch (35mm) pole. Ensure the speaker is placed on a stable, level surface or securely mounted to prevent tipping.

חֲזִית view of the Samson Auro D208 Active Loudspeaker, showcasing its compact design and protective grille.

חיבורים

The Auro D208 features a Mic/Line input and an additional Line output for linking multiple speakers.

1. חיבור חשמל: חבר את כבל החשמל המצורף לכניסת ה-AC בפאנל האחורי ולאחר מכן לשקע חשמל מתאים.
2. חיבור קלט: Use an XLR or 1/4-inch cable to connect your microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line input.
3. Linking Speakers: To connect additional Auro D208 speakers, use an XLR cable from the Line output of the first speaker to the input of the next speaker.

Rear panel of the Samson Auro D208, illustrating the Mic/Line input, Line output, volume control, and Clip LED.

הוראות הפעלה

הפעלה/כיבוי

After all connections are made, turn on the power switch located on the rear panel. It is recommended to turn on the Auro D208 last in your audio chain and turn it off first.

בקרת עוצמת הקול

Adjust the main Volume control knob on the rear panel to set the overall output level of the loudspeaker. Start with the volume at its minimum setting and gradually increase it to the desired level.

Clip LED Indicator

The Clip LED illuminates when the input signal is too strong, indicating potential distortion. If the Clip LED lights up frequently, reduce the input level from your source or the volume on the Auro D208 to prevent signal clipping.

תַחזוּקָה

ניקוי

Clean the exterior of the loudspeaker with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure the speaker is unplugged before cleaning.

אִחסוּן

When not in use, store the loudspeaker in a dry, cool environment, away from direct sunlight and extreme temperatures. If storing for extended periods, consider covering it to protect against dust.

פתרון בעיות

מפרטים

אחריות ותמיכה

מידע על אחריות

This product is covered by a 1-year parts and labor limited warranty. Please retain your proof of purchase for warranty claims.

תמיכת לקוחות

For technical assistance, service, or warranty inquiries, please visit the official Samson webאתר או צרו קשר עם מחלקת תמיכת הלקוחות שלהם. פרטי קשר ניתן למצוא בדרך כלל באתר היצרן webבאתר או באריזת המוצר.