Teknetics T2LTD-BLK Special Edition Metal Detector User Manual

מָבוֹא

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Teknetics T2LTD-BLK Special Edition Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Teknetics T2LTD-BLK is designed for advanced metal detection, offering exceptional depth and speed for coin shooting and relic hunting. It features dual DD search coils (5-inch and 11-inch) and trigger-actuated pinpointing for precise target location.

מידע בטיחות חשוב

• Always exercise caution when digging to avoid underground utilities or hazardous objects.
• Do not operate the detector in thunderstorms or severe weather conditions.
• Keep the control housing dry. The search coils are waterproof, but the control housing is not.
• השתמש רק בסוללות מומלצות.
• This device is heavy and may cause strain or injury if not handled properly. Maintain proper posture and take breaks during extended use.

רכיבי מוצר

Your Teknetics T2LTD-BLK package includes the following main components:

• Control Housing with Display
• גזע עליון
• גזע תחתון
• משענת יד
• 11-inch DD Waterproof Search Coil
• 5-inch DD Waterproof Search Coil
• Coil Mounting Bolt and Washers

Image: Teknetics T2LTD-BLK Metal Detector with both 5-inch and 11-inch DD coils. This image shows the complete metal detector assembly, including the control unit, shaft, armrest, and both the larger 11-inch DD search coil and the smaller 5-inch DD search coil.

התקנה והרכבה

1. חבר את סליל החיפוש:

   Secure the desired search coil (11-inch or 5-inch DD) to the lower stem using the provided non-metallic bolt and washers. Ensure it is snug but do not overtighten.

2. Assemble the Stems:

   Insert the lower stem into the upper stem. Adjust the length to a comfortable position for your height, ensuring the search coil is parallel to the ground when held naturally.

3. Mount the Control Housing:

   Slide the control housing onto the upper stem. The armrest should be positioned to support your forearm comfortably.
4. חבר את כבל הסליל:

   Wrap the search coil cable securely around the stem, leaving enough slack for coil movement. Plug the connector into the receptacle on the control housing. Ensure the connection is firm.

5. התקן סוללות:

   The T2LTD-BLK requires 4 AA batteries. Open the battery compartment on the control housing and insert the batteries, observing proper polarity. Close the compartment securely.

תמונה: תקריב view of the Teknetics T2LTD-BLK control panel. This image highlights the digital display, showing target ID, sensitivity, discrimination settings, and battery indicator. The control knob and menu button are also visible.

הוראות הפעלה

הפעלה/כיבוי

To power on the detector, press and hold the MENU button. To power off, press and hold the MENU button again until the display turns off.

מצבי פעולה בסיסיים

• מצב כל מתכת: Detects all types of metal. Ideal for finding deeply buried targets or when the target material is unknown.
• Discrimination Mode: Allows the user to filter out unwanted metals (e.g., iron) and focus on specific target types.

הגדרות מפתח

• רְגִישׁוּת: Adjusts the detector's ability to detect targets. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
• Discrimination Level: Sets the rejection level for unwanted metals. Higher levels reject more ferrous items.
• מאזן קרקע: Essential for stable operation in mineralized soil. The T2LTD-BLK features manual ground balance. Refer to the detailed manual for specific ground balancing procedures.
• מספר צלילים: Selects the audio tone response for different target IDs.

Trigger-Actuated Pinpointing

To pinpoint a target, center the search coil over the detected object. Pull and hold the trigger located under the control housing. Slowly move the coil in a cross-pattern over the target. The audio tone will peak, and the target ID will stabilize when the coil is directly over the center of the object.

תחזוקה וטיפול

• ניקוי: Wipe down the detector with a damp מטלית לאחר כל שימוש. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• אִחסוּן: Store the detector in a dry, cool place. Remove batteries if storing for extended periods to prevent leakage.
• טיפול בסליל: The search coils are waterproof and can be rinsed with fresh water. Ensure the coil cable connection to the control housing remains dry.
• החלפת סוללה: החלף סוללות כאשר מחוון סוללה חלשה מופיע על הצג.

פתרון בעיות

מפרטים

מידע על אחריות

Teknetics products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Teknetics webאתר. שמור את הוכחת הרכישה שלך לצורך תביעות אחריות.

תמיכת לקוחות

For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Teknetics customer support. You can find contact information on the official Teknetics webבאתר או דרך הסוכן המורשה שלך.

Official Teknetics Webאֲתַר: Teknetics Store on Amazon