מָבוֹא
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your RODE Videomic Pro on-camera microphone. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
The RODE Videomic Pro is a compact, lightweight shotgun microphone designed for use with camcorders, DSLR cameras, and portable audio recorders. Its integrated Rycote Lyre shock mounting system isolates the microphone capsule from external vibrations, providing clear audio capture.
תוכן החבילה
עם פתיחת האריזה, אנא ודא שכל הרכיבים נמצאים:
- RODE Videomic Pro Microphone
- שמשת קצף
- Integrated Rycote Lyre Shock Mount
- 3.5mm Stereo Mini-Jack Output Cable (attached)
- Furry Wind Cover (Dead Cat)
הגדרה
Follow these steps to set up your RODE Videomic Pro:
- התקן סוללה: The Videomic Pro requires a 9V battery (not included). Open the battery compartment located on the underside of the microphone body and insert the battery, observing the correct polarity.
- הַרכָּבָה:
The microphone features an integrated cold shoe mount. Slide the mount into your camera's hot shoe or a compatible cold shoe adapter. Tighten the locking wheel securely to prevent accidental detachment.

Image: The RODE Videomic Pro, a black shotgun microphone with a foam windshield, shown with an optional furry wind cover (dead cat) and its integrated shock mount. The RODE logo is visible on the foam windshield.
- חיבור למצלמה: Plug the attached 3.5mm stereo mini-jack cable into your camera's microphone input port. Ensure the connection is firm.
- חברו את השמשה הקדמית: Place the foam windshield over the microphone capsule. For outdoor use or windy conditions, the included furry wind cover (dead cat) can be used over the foam windshield for superior wind noise reduction.
הוראות הפעלה
Understanding the controls and settings will help you achieve the best audio quality.
הפעלה/כיבוי
Locate the power switch on the rear of the microphone. Slide it to the 'ON' position to power on the microphone. Slide it to 'OFF' when not in use to conserve battery life.
Level Control (dB)
The Videomic Pro features a three-position level control switch on the rear:
- 0 dB: Standard gain setting, suitable for most recording situations.
- +20 dB: Boosts the output level by 20dB. Useful for cameras with noisy preamps or when recording quiet sources.
- -10 dB: Attenuates the output level by 10dB. Ideal for recording loud sound sources to prevent distortion.
מסנן גבוה (HPF)
A three-position high-pass filter switch is also located on the rear of the microphone:
- שטוח: No filter applied. Captures the full frequency range.
- 75Hz: Engages a 75Hz high-pass filter. This helps to reduce low-frequency noise such as air conditioner hum or traffic rumble.
- 150Hz: Engages a 150Hz high-pass filter. This provides a stronger cut-off for more aggressive low-frequency noise reduction, useful in very noisy environments.
הערה חשובה:
Always monitor your audio using headphones connected to your camera's headphone output (if available) to ensure proper levels and prevent clipping. Adjust the microphone's level control and your camera's audio input levels accordingly.
תַחזוּקָה
Proper care will extend the life of your RODE Videomic Pro:
- ניקוי: השתמשו במטלית רכה ויבשה לניקוי גוף המיקרופון. אין להשתמש בחומרי ניקוי נוזליים או ממסים.
- טיפול בשמשה הקדמית: The foam windshield can be gently hand-washed with mild soap and water if it becomes dirty. Allow it to air dry completely before reattaching.
- החלפת סוללה: Replace the 9V battery when the low battery indicator light (if present) illuminates, or if you notice a decrease in audio quality. Always remove the battery if the microphone will not be used for an extended period to prevent leakage.
- אִחסוּן: אחסן את המיקרופון במקום קריר ויבש, הרחק מאור שמש ישיר וטמפרטורות קיצוניות.
- Mount Shock: The Rycote Lyre shock mount is durable, but avoid excessive force or bending to prevent damage.
פתרון בעיות
If you encounter issues with your Videomic Pro, refer to the following common problems and solutions:
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| No audio or very low audio level. |
|
|
| Distorted or clipped audio. |
|
|
| Excessive wind noise or low-frequency rumble. |
|
|
| Vibrations or handling noise in audio. |
|
|
מפרטים
| תכונה | פְּרָט |
|---|---|
| גורם צורת מיקרופון | רוֹבֵה צַיִד |
| דפוס קוטבי | סופר קרדיואיד |
| טווח תדרים | 20Hz - 20kHz (selected HPF @75Hz/150Hz) |
| יחס אות לרעש | 70 dB |
| רמת רעש | 14 dB |
| רגישות אודיו | 12 dB |
| עַכָּבָּה | 200 אוהם |
| סוג מחבר | 3.5 מ"מ ג 'ק |
| מקור כוח | Battery Powered (9V battery) |
| מכשירים תואמים | מַצלֵמָה |
| משקל פריט | 4.3 אונקיות (122 גרם) |
| מידות המוצר (L x W x H) | 1.69 x 5.91 x 3.74 אינץ' |
| רכיבים כלולים | Microphone, Foam Windshield, Integrated Rycote Lyre Shock Mount, 3.5mm Cable, Furry Wind Cover |
הערה: המפרטים עשויים להשתנות ללא הודעה מוקדמת.
אחריות ותמיכה
RODE Microphones offers a comprehensive warranty for its products. For detailed warranty information, product registration, and technical support, please visit the official RODE webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם.
משאבים מקוונים:
- Official RODE Webאֲתַר: www.rode.com
- Product Support: Refer to the support section on the RODE website for FAQs, firmware updates, and service requests.
אנא שמור את הוכחת הרכישה שלך עבור תביעות אחריות.