מדריך הוראות לשקע חשמלי של Forney 58402

1. המוצר נגמרview

The Forney 58402 is a heavy-duty Bakelite pin-type wall electrical receptacle designed for surface mounting. It features a 2-pole/3-wire grounding configuration, suitable for high-power applications. This receptacle is rated for 50 Amps at 125/250 Volts and conforms to NEMA 6-50 standards.

תכונות עיקריות:

• Heavy duty Bakelite pin-type design for durability.
• Wall electrical receptacle for surface mounting.
• 2-pole/3-wire grounding for enhanced safety.
• 50 Amp with 125/250-Volt capacity.
• NEMA 6-50 electrical configuration.

איור 1: חזית view of the Forney 58402 Electrical Receptacle, showing the pin configuration and voltage/ampמחיקת דירוגים.

2. מידע בטיחות

אַזהָרָה: Electrical work can be hazardous. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this receptacle. Failure to do so may result in serious injury or death. If you are unsure about any part of these instructions, consult a qualified electrician.

• ודאו שכל התקנים החשמליים המקומיים והארציים פועלים לפי התקנות.
• השתמשו בציוד מגן אישי (PPE) מתאים, כגון כפפות מבודדות ומשקפי בטיחות.
• ודא את הכרךtagה ו amperage of your circuit match the receptacle's ratings (50A, 125/250V).
• Do not use this receptacle if it appears damaged.
• הרחק ילדים ממתקני חשמל.

3. התקנה והתקנה

This section provides general guidelines for installing the Forney 58402 wall receptacle. Specific wiring configurations may vary based on local codes and existing electrical systems.

כלים וחומרים נדרשים:

• מברגים (פיליפס ופלטהד)
• חשפניות חוט
• כרך ידtagבודק e
• Mounting screws (appropriate for surface)
• Electrical box (if not already present)

שלבי התקנה:

1. נתק חשמל: Locate the circuit breaker or fuse controlling the circuit where the receptacle will be installed and turn it OFF. Verify power is off using a voltagבודק e.
2. הכן משטח הרכבה: Ensure the surface is clean, dry, and structurally sound. The receptacle is designed for surface mounting.
3. Mount the Receptacle Base: Position the receptacle base on the desired surface. Use appropriate mounting screws to secure it firmly. The back of the receptacle features pre-drilled holes for this purpose.


איור 2: אחורה view of the Forney 58402 Receptacle, showing the metal mounting plate and screw holes for surface installation.

4. חיבורי חוטים: This receptacle is a 2-pole/3-wire grounding type (NEMA 6-50). It typically requires two hot wires (L1, L2) and one ground wire.
• הסירו בערך 1/2 אינץ' של בידוד מכל חוט.
• Connect the L1 (Hot) wire to one of the brass-colored terminals.
• Connect the L2 (Hot) wire to the other brass-colored terminal.
• Connect the Ground wire (typically green or bare copper) to the green hexagonal grounding screw.


איור 3: תחתון view of the Forney 58402 Receptacle, illustrating the internal wiring access points and terminals.

5. חיווט מאובטח: Ensure all wire connections are tight and secure. No bare wire should be exposed outside the terminals.
6. הרכיבו מחדש: Carefully place the cover over the wired base and secure it with the provided screws.
7. החזר כוח: Once installation is complete and verified, turn the power back ON at the circuit breaker or fuse box.

4. הוראות הפעלה

The Forney 58402 Electrical Receptacle is designed for straightforward operation.

1. בדוק תאימות: Ensure the plug of your electrical device is compatible with the NEMA 6-50 configuration of this receptacle.


איור 4: תקריב view of the Forney 58402 Receptacle's pin configuration, showing the 50A 250V markings.

2. הכנס תקע: Align the pins of your device's plug with the slots on the receptacle and firmly insert the plug.
3. הסר את התקע: To disconnect, grasp the plug firmly and pull it straight out from the receptacle. Do not pull by the cord.

5. תחזוקה

Regular inspection and basic maintenance will help ensure the longevity and safe operation of your Forney 58402 receptacle.

• בדיקה תקופתית: Annually inspect the receptacle for any signs of damage, cracks, discoloration, or loose connections.
• ניקוי: With power disconnected, gently wipe the exterior of the receptacle with a dry, clean cloth to remove dust or debris. Do not use liquid cleaners.
• הדק חיבורים: If comfortable and with power disconnected, periodically check and tighten the terminal screws to ensure secure wire connections.
• הגנת הסביבה: אם מותקן בפרסומתamp or dusty environment, ensure the receptacle is adequately protected from moisture and excessive dust accumulation.

6. פתרון תקלות

If you experience issues with your Forney 58402 receptacle, consider the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, or if you are unsure, contact a qualified electrician.

7. מפרטים

8. אחריות ותמיכה

Specific warranty details for the Forney 58402 Electrical Receptacle are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact Forney customer service directly.

You may visit the official Forney webאתר ליצירת קשר ומשאבים נוספים: www.forneyind.com