Sunlite PLT26/E/SP27K

מדריך למשתמש לנורת פלורסנט קומפקטית 4 פינים של Sunlite PLT26/E/SP27K בנפח 26 וואט

1. המוצר נגמרview

The Sunlite PLT26/E/SP27K is a 26-watt compact fluorescent plug-in light bulb designed for use with external electronic ballasts. This 4-pin bulb provides 1800 lumens of light output with a color rendering index (CRI) of 80, ensuring accurate color perception. It features a 2700K color temperature, producing a warm white light similar to traditional incandescent bulbs. The bulb is engineered for longevity, offering an average lamp life of 10,000 hours, and is compatible with GX24Q-3 4-Pin sockets.

Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb

Figure 1: Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb. This image displays the overall structure of the 4-pin compact fluorescent bulb.

2. מידע בטיחות

Please read and understand all safety instructions before installing or replacing the light bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • כיבוי: Always turn off the power to the fixture at the circuit breaker or fuse box before attempting any installation, removal, or maintenance.
  • לְהִתְקַרֵר: Allow the bulb to cool completely before handling or replacing it to prevent burns.
  • סילוק נכון: This compact fluorescent lamp contains a small amount of mercury. Dispose of the bulb according to local, state, and federal regulations. Do not dispose of in regular household trash.
  • תאימות נטל: Ensure that the fixture's electronic ballast is compatible with a 26-watt, 4-pin CFL bulb (GX24Q-3 base). Using an incompatible ballast can damage the bulb or fixture.
  • שימוש פנימי בלבד: This bulb is designed for indoor use in appropriate fixtures.
  • לא ניתן לעמעום: This bulb is generally not dimmable unless explicitly stated on the packaging or fixture. Using it with a dimmer not designed for CFLs may cause damage or malfunction.

3. התקנה

Follow these steps to properly install your Sunlite PLT26/E/SP27K light bulb:

  1. אימות כיבוי: Confirm that the power to the light fixture is completely turned off at the circuit breaker or wall switch.
  2. הסר את הנורה הישנה (אם רלוונטי): If replacing an existing bulb, gently grasp the base of the old bulb and pull it straight out from the socket. Avoid twisting the glass tubes.
  3. בדוק את השקע: Ensure the GX24Q-3 4-pin socket is clean and free from debris.
  4. יישור פינים: Carefully align the four pins on the base of the new Sunlite bulb with the corresponding slots in the fixture's socket.
  5. הכנס נורה: Push the bulb firmly and straight into the socket until it is securely seated. Do not force the bulb or twist the glass tubes.
Close-up of Sunlite PLT26/E/SP27K 4-pin base

איור 2: תקריב view of the 4-pin base of the Sunlite PLT26/E/SP27K bulb. This image highlights the GX24Q-3 base for proper alignment during installation.

4. תפעול

Once the bulb is securely installed and the power is restored, the Sunlite PLT26/E/SP27K bulb will illuminate when the light switch is turned on. Compact fluorescent lamps typically require a brief warm-up period to reach full brightness and stable color output. This is normal operation and not an indication of a defect.

5. תחזוקה

The Sunlite PLT26/E/SP27K light bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • ניקוי: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass tubes with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the bulb.
  • תַחֲלִיף: When the bulb reaches the end of its operational life (approximately 10,000 hours), it will need to be replaced. Follow the installation steps in Section 3 in reverse to safely remove the old bulb and install a new one.

6. פתרון תקלות

If you encounter issues with your Sunlite PLT26/E/SP27K light bulb, refer to the following troubleshooting tips:

בְּעָיָהסיבה אפשריתפִּתָרוֹן
הנורה לא נדלקתאין כוח לתקן
הנורה לא יושבת כהלכה
נורה פגומה
נטל פגום
בדוק את מפסק החשמל ואת מתג הקיר
Ensure bulb is fully inserted into socket
החלף נורה בחדשה
Consult an electrician to check/replace ballast
Bulb flickers or cycles on/offIncompatible or failing ballast
הנורה לקראת סוף חייה
חיבור רופף
Ensure ballast is compatible; replace if failing
החלף נורה
Re-seat bulb firmly in socket
פלט האור עמוםהנורה לא התחממה לחלוטין
הנורה לקראת סוף חייה
Allow a few minutes for bulb to reach full brightness
החלף נורה

7. מפרטים

Detailed technical specifications for the Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb:

Sunlite PLT26/E/SP27K Light Bulb with dimensions

Figure 3: Sunlite PLT26/E/SP27K bulb illustrating its approximate length of 5.20 inches.

תכונהמִפרָט
מותגסאנלייט
מספר דגםPLT26/E/SP27K
סוג אורCFL, פלורסנט
מהtage26 וואט
בְּהִירוּת1800 לומן
טמפרטורת צבע2700 קלווין (לבן חם)
אינדקס עיבוד צבע (CRI)80
בסיס נורהGX24Q-3 4-Pin
חיים ממוצעים10,000 שעות
כרך ידtage100-120 וולט, 60 הרץ
אורך הנורה5.20 אינץ' בערך
חוֹמֶרCopper (pins)
שימוש בפנים/חוץמקורה

8. אחריות ותמיכה

For specific warranty information regarding your Sunlite PLT26/E/SP27K light bulb, please refer to the product packaging or contact Sunlite customer support directly. General support and product inquiries can be directed to the manufacturer's official channels.

יַצרָן: סאנלייט
Webאֲתַר: Visit the Sunlite Store on Amazon

© 2023 Sunlite. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.