On-Q PW7760

Legrand On-Q PW7760 12VDC 18W Power Supply Instruction Manual

דגם: PW7760

1. הקדמה

This manual provides instructions for the safe and efficient use of your Legrand On-Q PW7760 12VDC 18W Power Supply. This power supply is designed to provide reliable 12V DC power for various data networking and video products within a structured wiring enclosure. Please read this manual thoroughly before installation and operation.

2. מידע בטיחות

WARNING: Risk of Electric Shock. Do not open the unit. Refer all servicing to qualified personnel.

  • Ensure the power supply is disconnected from the main power source before performing any installation, maintenance, or troubleshooting.
  • אין לחשוף את היחידה ללחות או לטמפרטורות קיצוניות.
  • מוצר זה מיועד לשימוש פנימי בלבד.
  • Use only with compatible devices requiring 12V DC input.
  • ודא אוורור נאות סביב היחידה כדי למנוע התחממות יתר.
  • The power supply is UL listed, indicating compliance with safety standards.

3. תכולת החבילה

ודא שכל הפריטים נמצאים בחבילה שלך:

  • Legrand On-Q PW7760 12VDC 18W Power Supply (1 unit)
  • מדריך הוראות (מסמך זה)

4. התקנה והתקנה

The PW7760 power supply is designed for wall mounting, typically within a structured wiring enclosure. Follow these steps for proper installation:

  1. הרכבת ספק הכוח: The unit features a design suitable for wall mounting. Secure the power supply within your structured wiring enclosure using appropriate fasteners (not included) through the designated mounting points. Ensure it is firmly attached to prevent accidental dislodgement.
  2. חיבור לחשמל AC: Plug the power supply's AC input cord into a standard 120V AC wall outlet or a power strip within the enclosure. Ensure the outlet is easily accessible and not overloaded.
  3. חיבור התקנים: Connect the DC output barrel connector of the PW7760 power supply to the 12V DC input port of the device you intend to power (e.g., network switch, video module). Verify that the device requires 12V DC and does not exceed the power supply's 18W (1.5A) capacity.
Legrand On-Q Power Supply installed in a structured wiring enclosure, powering network components.
איור 1: דוגמהample installation of the Legrand On-Q Power Supply within a structured wiring enclosure, providing power to various network modules.
Close-up of the Legrand On-Q Power Strip Module with a red power switch.
Figure 2: The Legrand On-Q Power Supply (PW7760) module, featuring its power input and output connections.

5. הוראות הפעלה

Once the power supply is correctly installed and connected to your devices:

  • הפעלה: If the power supply has an integrated switch, toggle it to the 'ON' position. Otherwise, ensure the wall outlet or power strip it is connected to is active.
  • אמת פעולה: Check the connected devices for power indicators to confirm they are receiving power.
  • כיבוי: To disconnect power, either toggle the integrated switch to 'OFF' or unplug the power supply from the AC outlet.

6. תחזוקה

The Legrand On-Q PW7760 Power Supply requires minimal maintenance:

  • ניקוי: Disconnect the power supply from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
  • בְּדִיקָה: Periodically inspect the power cords and connectors for any signs of damage, fraying, or loose connections. Replace any damaged components immediately.
  • אוורור: Ensure that the area around the power supply remains clear of obstructions to allow for proper airflow and prevent overheating.

7. פתרון תקלות

אם נתקלת בבעיות באספקת החשמל שלך, עיין בבעיות הנפוצות ובפתרונות הבאות:

בְּעָיָהסיבה אפשריתפִּתָרוֹן
אין חשמל למכשירים מחובריםPower supply not plugged in or AC outlet is off.Ensure the power supply is securely plugged into a live AC outlet. Check the outlet with another device.
אין חשמל למכשירים מחובריםמתג ספק הכוח כבוי.If applicable, ensure the power supply's integrated switch is in the 'ON' position.
אין חשמל למכשירים מחובריםDC output cable is loose or damaged.Verify the DC barrel connector is firmly seated in the device's input. Inspect the cable for damage.
Connected device malfunctions or restartsDevice requires more power than 18W.Confirm the power requirements of your device. This power supply provides 12VDC at 18W. Using it with higher-power devices may cause instability or damage.
Power supply feels excessively hotPoor ventilation or overloaded.Ensure adequate airflow around the unit. Disconnect some devices if multiple are connected and check if the temperature reduces.

8. מפרטים

תכונהפְּרָט
מספר דגםPW7760
יַצרָןLegrand On-Q
קלט כרךtage120V AC (סטנדרטי בארה"ב)
פלט כרךtage12V DC
מהtage18 וואט
Ampלמחוק0.4 Amps (Input), 1.5 Amps (פלט)
מידות (L x W x H)3.15 x 1.97 x 1.3 אינץ'
משקל פריט6.4 אונקיות
חוֹמֶרHigh Impact Flame Retardant Plastic
סוג הרכבהמתקן קיר
תכונות מיוחדותהגנה מפני קצר חשמלי
הסמכותרשימת UL

9. אחריות ותמיכה

For warranty information and technical support, please refer to the official Legrand On-Q webאתר או צרו קשר ישירות עם שירות הלקוחות שלהם. שמרו את קבלת הרכישה כהוכחת קנייה לתביעות אחריות.

משאבים מקוונים: www.legarand.us/on-q

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.